1. The optical performance is the best. The clarity and light transmittance are the highest, the reflection is the least, and there is no color distortion, this is because the sound wave screen body is pure glass, unlike the resistive screen with multiple layers of composite film; The capacitive screen is coated with a layer of film on the surface, and the light transmittance is worse. 2. Anti-scratch and anti-barbaric use ...

Fault 1: Touch deviation Phenomenon: The position of the finger does not coincide with the mouse arrow. Analysis: After installing the driver, there was no vertical touch to the bullseye center position when correcting the position. Solution: Recalibrate the position. Fault 2: Touch ...

1. Resistive touch screen Analog resistive screen The analog resistive touch screen is what we usually call the "resistive screen", which is a kind of touch screen that uses pressure sensing to control. It is made of two layers of ITO plastic film coated with conductive function, and the two ITO are equipped with microparticle supports.

1. Embedded touch screen structure At present, the touch screen basically adopts an external structure, and the display module and the touch module of this structure are two relatively independent devices, and then the two devices are integrated through the back-end lamination process, but this relatively independent external structure will affect the ...

1. There is no response to touch after using it for a period of time The touch screen will not respond after a period of normal use after being turned on. Touch screen fault analysis and processing are divided into the following three situations: 1) In some applications, due to poor grounding performance, the control box shell will be covered with a large number of ...

1. The meaning is different Resistive Screen: A resistive touch screen is a touch screen product controlled by pressure sensing. Capacitive screen: Capacitive screen, also known as capacitive touch screen, is a four-layer composite glass screen that uses capacitive touch technology to work. 2. The working principle is different Electricity...

1. Do not stack resistive screens, use tray disks. 2. Do not use corrosive organic solvents to wipe the surface of the touch screen film. Such as industrial alcohol, etc. 3. When cleaning the surface of the product, it is necessary to wipe it with a soft cloth (deerskin) dipped in petroleum ether. ...

Fault 1: Touch deviation Phenomenon: The position of the finger does not coincide with the mouse arrow. Analysis: After installing the driver, there was no vertical touch to the bullseye center position when correcting the position. Solution: Recalibrate the position. Fault 2: Touch ...

merit The advantage of resistive touch screen is that its screen and control system are relatively cheap, and the response sensitivity is very good, and whether it is a four-wire resistance touch screen or a five-wire resistance touch screen, they are a kind of working environment that is completely isolated from the outside world, not afraid of dust and water vapor, and can adapt to various ...

advantage 1. Durability The material used in the capacitive sensor interface solution is the same as that of the RTS, which is based on polyethylene terephthalate (PET) with an additional layer of indium tin oxide (ITO). However, capacitive sensors do not have the optical problems and durability problems of RTS, because ...

1. High degree of stability, will not drift due to changes in time and environment 2. Highly adaptable, not subject to current, voltage and static interference, suitable for some harsh environmental conditions (explosion-proof, dust-proof) 3. High light transmittance, no intermediate medium, up to 100% 4. ...

Ambient light factor, infrared receiver tube has a working range between minimum sensitivity and maximum illumination, but touch screen products can not limit the range of use, from the dark cabaret room to the outdoor use under the high-intensity sunlight on Hainan Island, as a product, it must adapt. Rapid detection ...

In fact, a single device such as a fifth-generation touchscreen can already be used as a complete HMI platform, replacing a mouse, a writing pad, and even a keyboard. From the application level, the touch screen should not be just a simple device that converts the touch position into coordinate information, but ...

1 Resistive touch screen - Not afraid of water and dirt - It has the cost advantage of small size, which is suitable for industrial control products and personal portable products - Fear of scratches, low light transmittance, low temperature dullness 2. Surface acoustic touch screen - New and easy to use, suitable for short-term products ...

Accuracy: Accuracy can be defined as the maximum positioning error in a predefined touchscreen area, measured in the straight-line distance between the actual position of the finger and the measured position. When measuring accuracy, a simulated or mechanical finger is used. A finger placed on the panel ...

Balance, simplicity and coordination are the three key points of industrial touch screen all-in-one design, among which: Balance: Ensure that all objects on the screen, such as windows, buttons, and slips, have the same style. The size, concave and convex effect of buttons at all levels and the annotation font and font size are consistent, and the color of the button is consistent.

1) Check whether the connection of the touch screen is right, and whether one of the wires connected to the keyboard port of the host (take the working voltage of 5 volts touch screen from the keyboard port) is connected, please check the connection. 2) Observe the situation of the touch screen control box light, if it is not lit or the red light is on, it means that the control box is broken, please change it.

1. The resistive touch mouse only moves in a small area or the resistive touch screen is not allowed This usually happens when you install the driver for the first time, so please run the touchscreen calibration procedure. The touchscreen calibration procedure must also be run after changing the display resolution (Start – Procedure) 2 ...

Four-wire touch screen The four-wire touchscreen contains two resistive layers. One of the layers has a vertical bus on the left and right edges of the screen, and the other layer has a horizontal bus at the bottom and top of the screen, see Figure 1. In order to measure in the X-axis direction, the left side of the bus is offset to 0V, and the right side ...

Inaccurate screen position: Repositioning can be done via driver software. Touch position and screen cursor upside down: When installing the touch screen, the position of the screen is reversed, please adjust the touch screen position according to the principle of right-hand position out. The touchscreen display icon keeps pointing towards the fixed ...

Screen structure: ITO Film is attached to ITO Glass, and is isolated by DOT points in the middle Outlet cable: integrated with the panel Connector: 2.54mm pitch socket, standard AMP87499-9 Touch media: fingers, gloved hands, pens, credit cards, etc ...