Hardware Problems and Solutions of Kunlun Tongtai MCGS Touch Screen(96-100)

merit The advantage of resistive touch screen is that its screen and control system are relatively cheap, and the response sensitivity is very good, and whether it is a four-wire resistance touch screen or a five-wire resistance touch screen, they are a kind of working environment that is completely isolated from the outside world, not afraid of dust and water vapor, and can adapt to various ...

Inaccurate screen position: Repositioning can be done via driver software. Touch position and screen cursor upside down: When installing the touch screen, the position of the screen is reversed, please adjust the touch screen position according to the principle of right-hand position out. The touchscreen display icon keeps pointing towards the fixed ...

1. Compared with the four-line touch screen, the five-line touch screen has a longer service life and can withstand more than 30 million clicks. The lifespan of a four-wire resistive touch screen is 3 to 4 years, while the average of a five-wire resistive screen can reach 6 years. 2. Once the industrial display of the four-wire touch screen is touched...

1. The capacitive touch screen only needs to touch, and no pressure is needed to generate a signal. 2. Capacitive touch screen only needs to be corrected once or not at all after production, while resistive technology requires conventional correction. 3. The life of the capacitive solution will be longer, because the part in the capacitive touch screen ...

The first method: use a U disk to make the designed interface into a U disk function package, and then plug it into the touch screen, the touch screen will automatically detect and update it according to the prompts. The second method: use a special download cable for the touch screen, download the program, and it will automatically overwrite the original environment. ...

1. If the user is using a capacitive touch screen, it is recommended that the user first install the driver required for the capacitive touch screen correctly according to the requirements of the relevant manual, and then click "Start"/"Program"/"Micro ...

1. TPC1262HI common fault phenomenon of Kunlun Tongtai touch screen (1) Black screen, blurred screen, white screen (2) Caused by the aging of the LCD screen, the high voltage is low, and the lamp is aging (3) The LCD screen has no display, and the brightness is not clear (4) LCD screen display vertical bar, display horizontal bar ...

The five-wire resistive touch panel is composed of two layers: (1) ITO Glass: A piece of glass or plexiglass is used as the substrate, and the surface is coated with a transparent conductive layer. (2) ITO polyester plastic layer (ITO Film): The surface is hardened to make the surface smooth and ...

86. How to perform touch calibration on TPC (1) Enter the TPC CE operating system and double-click the "Touch Screen Calibration" icon on the desktop for calibration; (2) Power on TPC, click the startup progress bar to enter the startup properties window, do not do anything, and the system will automatically enter the touch after 30 seconds.

31. Historical alarms are not displayed (1) "Automatically save the generated alarm information" is not selected in the attribute setting of the alarm data object; (2) The alarm data does not reach the upper/lower limit of the alarm value; (3) "MCGS_ALARM" is not selected for the group object. 32. ...

Fault 1: Touch deviation Phenomenon: The position of the finger does not coincide with the mouse arrow. Analysis: After installing the driver, there was no vertical touch to the bullseye center position when correcting the position. Solution: Recalibrate the position. Fault 2: Touch ...

Ambient light factor, infrared receiver tube has a working range between minimum sensitivity and maximum illumination, but touch screen products can not limit the range of use, from the dark cabaret room to the outdoor use under the high-intensity sunlight on Hainan Island, as a product, it must adapt. Rapid detection ...

1. Check the terminal port First, check whether the wiring interface is loose, and then check whether there is a conflict between the serial port and the interrupt number, if there is a conflict, the resources should be adjusted to avoid the conflict. Then check whether there are cracks on the surface of the industrial touch screen, and replace them in time if there are cracks. It is also necessary to check the contact ...

1. The touch screen is actually called man-machine interface, a man-machine control method that can communicate with the control equipment. Think of it as a collection of button indicator meters. 2. If you want to understand the working principle of the touch screen, you must know how to communicate, we know that a button to control a contactor ...

56. Does TPC support OPC communication? No, the network version supports OPC communication. 57. 200PLCLC communication wiring with TPC7062K (1) The 7 positive and 8 negative of the TPC RS485 interface is connected with the positive and 8 negative of the PLC serial port 3, and the wiring diagram is as follows: TPC PLC 58. 200 ...

　　1. First of all, check whether the settings of the latest version of Kunlun Tongtai are correct, such as checking whether the network connection is normal, checking whether the IP address of the server is correct, checking whether the port number is correct, checking whether the username and password are correct, etc. 2. Secondly, it is necessary to check the Kunlun ...

After receiving the touch signal, the capacitive touch screen converts the touch data into electrical pulses and transmits it to the touch screen control IC for processing. The signal is amplified by a low-noise amplifier (LNA), then converted and demodulated by analog-to-digital ratio, and finally sent to a DSP for data processing. Electricity...

70. Omron PLC: Parent device parameter settings (1) The communication parameter setting of the parent device of the universal serial port should correspond to the communication parameter setting of the PLC serial port, and the default standard parameters of the PLC are set to: 9600, 7, 2, E (even check); (2) Users can set it according to their needs, and it is recommended to ...

The first channel of all non-board devices in Kunlun MCGS is the communication status channel. After entering the running environment, after the device driver starts working, the communication status of the device is returned in this channel, for example, 0 indicates that the device communicates normally, and non-0 indicates that it is abnormal. Elder brother...

1. Touch screen (touchscreen), also known as "touch screen" and "touch panel", is an inductive liquid crystal display device that can receive input signals such as contacts.