Kunlun Tongtai touch screen - the characteristics of infrared touch screen

The first method: use a U disk to make the designed interface into a U disk function package, and then plug it into the touch screen, the touch screen will automatically detect and update it according to the prompts. The second method: use a special download cable for the touch screen, download the program, and it will automatically overwrite the original environment. ...

1. Four-wire resistive screen Features: High resolution, high-speed transmission reaction. Surface hardness treatment to reduce abrasions, scratches and chemical resistance. It has a smooth and matte finish. One correction, high stability, never drift. 2. Five-wire resistive screen Features: High resolution ...

1. The touch screen is not allowed to be repaired If it is the position touched by the finger that does not coincide with the mouse arrow. Then you should install the driver and correct the position without touching the bullseye vertically. and re-correct the position. If you touch some areas accurately ...

1. Tap the settings icon in the top right corner of the screen to enter the settings menu. 2. Find the "Time Settings" option in the menu and click to enter. 3. On the time settings screen, you can manually modify the current date and time. There is also the option to automatically get the time so that the device ...

The capital boost under the "Internet +" has profoundly affected the thinking mode of the commercial society and the consumption habits of the material world, and it is also the rapid penetration and subversion of traditional industries. In fact, as the intersection of the industrial control industry and the Internet, the marketing model of the HMI industry is being adopted by innovators.

(1) FILM- For touch film, the substrate is PET. When touched, the ITO in the upper and lower layers passes through the membrane, which creates deformation contacts in the X and Y axes (similar to the principle of moving a rheostat) with different "resistance values". According to different requirements, the surface of the film is divided into two types ...

1. Check the terminal port First, check whether the wiring interface is loose, and then check whether there is a conflict between the serial port and the interrupt number, if there is a conflict, the resources should be adjusted to avoid the conflict. Then check whether there are cracks on the surface of the industrial touch screen, and replace them in time if there are cracks. It is also necessary to check the contact ...

66. Mitsubishi PLC: How to choose the driver for programming port communication Mitsubishi PLC programming port is 422 communication, and Mitsubishi FX series programming port is selected; The 232BD is driven by Mitsubishi FX series programming port; The 485BD is driven by Mitsubishi FX series serial port. 67. Mitsubishi PLC: Programming port parameter setting ...

1. The optical performance is the best. The clarity and light transmittance are the highest, the reflection is the least, and there is no color distortion, this is because the sound wave screen body is pure glass, unlike the resistive screen with multiple layers of composite film; The capacitive screen is coated with a layer of film on the surface, and the light transmittance is worse. 2. Anti-scratch and anti-barbaric use ...

merit Capacitive touch screens only need to be touched, and no pressure is required to generate a signal. Capacitive touch screens require only one or no correction after production, while resistive technology requires conventional correction. The life of the capacitive solution is longer, because the capacitive touch screen ...

Fault 1: Touch deviation Phenomenon: The position of the finger does not coincide with the mouse arrow. Analysis: After installing the driver, there was no vertical touch to the bullseye center position when correcting the position. Solution: Recalibrate the position. Fault 2: Touch ...

MCGS Embedded is the main function of the configuration software 1. Simple and flexible visual operation interface: Adopt full Chinese and visual development interface, which meets the usage habits and requirements of Chinese. 2. Strong real-time performance and outstanding ...

1. Every day before turning on the device, scrub the screen with a dry cloth. 2. If a drop of water or a drink falls on the screen, the software will stop the response, which is due to the fact that the water droplets and fingers have similar properties, and the water droplets need to be wiped off. 3. The touch screen controller can automatically judge the dust, but the dust is too ...

The writing of the variable address of Kunlun Tongtai touch screen depends on the communication protocol and communication method used. In general, the variable address of the touch screen is communicated through the Modbus protocol, and the address can be written in the following ways: 1. For Modbus RTU communication mode, change ...

1. Stuff preparation 1. 1 Phillips screwdriver; 2. 1 small slotted screwdriver; 3. 1 hair dryer; 4. Several transparent double-sided tapes. Second, the old screen is dismantled 1. Use a Phillips screwdriver to remove the 6 screws on the back cover and open the back cover. 2. ...

advantage 1. Durability The material used in the capacitive sensor interface solution is the same as that of the RTS, which is based on polyethylene terephthalate (PET) with an additional layer of indium tin oxide (ITO). However, capacitive sensors do not have the optical problems and durability problems of RTS, because ...

The difference between infrared touch screen and capacitive touch screen is that the infrared touch screen has grooves and is afraid of strong light. This machine is thick and heavy, but it is cheap. The capacitive screen all-in-one machine is more beautiful, lighter and thinner, it is pure flat and easy to implement. 1. Infrared touch screen all-in-one machine Infrared technology ...

1. Click the "Settings" button on the MCGS interface to enter the settings interface. 2. Click on the "Alarm Answer" tab. 3. In the Alarm Response tab, check the Enable Alarm Response box, and set the Answer Time, Trigger Alarm Time Range, Response Time, Response Time, Alarm Response, Alarm Response, Alarm Response, Alarm Response, Alarm Response, Alarm Response,

1 Feature Overview There are two kinds of data saved by MCGS TPC, one is the internal variable data in the MCGS software, and the other is the data obtained from the lower computer device. 2 Functional Points [1] ...

Problem Description: Why can't Kunlun touch screen TPC1061Ti communicate directly with S7-300MPI? Solution(s): 1. According to the Kunlun Tongtai and Siemens 300MPI direct connection sample, the communication status is 1, ask customer service, check line 3 8 PLC --7 8 ...