Common problems and solutions of communication of Kunlun Tongtai MCGS touch screen(56-60)

The first method: 1. Power off the touch screen and restart, enter the StartCenter interface, click Settings->OP->Device->Reboot->Prepare for Reset, and the screen will enter boot mode. Note: Before the factory reset, you must change the screen ...

1. The meaning is different Resistive Screen: A resistive touch screen is a touch screen product controlled by pressure sensing. Capacitive screen: Capacitive screen, also known as capacitive touch screen, is a four-layer composite glass screen that uses capacitive touch technology to work. 2. The working principle is different Electricity...

1) Check whether the connection of the touch screen is right, and whether one of the wires connected to the keyboard port of the host (take the working voltage of 5 volts touch screen from the keyboard port) is connected, please check the connection. 2) Observe the situation of the touch screen control box light, if it is not lit or the red light is on, it means that the control box is broken, please change it.

1. If the user is using a capacitive touch screen, it is recommended that the user first install the driver required for the capacitive touch screen correctly according to the requirements of the relevant manual, and then click "Start"/"Program"/"Micro ...

First of all, select serial port 2, and then select the communication protocol MODBUSRTU, and find the communication address of the frequency according to the manual. Broaden: 1. Touch screen settings First, open the device configuration dialog box and double-click the device window dialog box. 2. Add Parent ...

1. The film surface of the touch screen is the touch surface, that is, the front of the product; The glass side is non-touch, i.e. the back of the product 2. The touch screen part is a glass product, the corners of the glass are sharp, please wear gloves/finger sleeves when assembling 3. The touch screen part is a fragile glass product, and it should not be touched during assembly.

Communication failures are generally due to three factors (1) Communication parameters, such as the COM number of the serial port, baud rate, etc., the IP address of the network port, etc. (2) Communication line, such as RS232 communication, the result is RS485. For example, it is directly connected to the network port, but it is connected to the cross. （3 ...

1. Compared with the four-line touch screen, the five-line touch screen has a longer service life and can withstand more than 30 million clicks. The lifespan of a four-wire resistive touch screen is 3 to 4 years, while the average of a five-wire resistive screen can reach 6 years. 2. Once the industrial display of the four-wire touch screen is touched...

1. Check whether the power supply of the host is working normally. First, check whether the host system is powered by checking whether the power indicator on the host chassis panel is on and whether the power supply fan is rotating. Secondly, use a multimeter to check whether the external voltage meets the requirements, the voltage is too high or too ...

Kunlun touch screen is a positioning device, the user can directly enter coordinate information by pointing to the computer, just like a mouse and keyboard, it is also an input device. Kunlun touch screen has many advantages such as durability, fast response, space saving, and convenient communication. With this technique, ...

1. The resistive touch mouse only moves in a small area or the resistive touch screen is not allowed This usually happens when you install the driver for the first time, so please run the touchscreen calibration procedure. The touchscreen calibration procedure must also be run after changing the display resolution (Start – Procedure) 2 ...

When using Kunlun Tongtai touch screen, sometimes for communication requirements, you need to set up a network communication address, so how to set up the network of Kunlun Tongtai touch screen? Let's take a look at it. Power on the Kunlun Tongtai touch screen, tap anywhere on the screen to enter the main interface after the TPC is powered on, ...

Problem Description: Why can't Kunlun touch screen TPC1061Ti communicate directly with S7-300MPI? Solution(s): 1. According to the Kunlun Tongtai and Siemens 300MPI direct connection sample, the communication status is 1, ask customer service, check line 3 8 PLC --7 8 ...

Nowadays, intelligent technology is developing rapidly, and the scene of human-computer interaction can be seen everywhere, whether it is a computer used at work or a self-service terminal in the day, these are all touchscreen all-in-one machines around you. With the rapid development of the Internet and IOT, the touch screen all-in-one machine is used as a human ...

1. Variables in the real-time runtime cannot add channels and send data using functions at the same time. 2. In the universal serial port parent device, the COM port indicates whether to select 232 or 485, and in the touch COM1 indicates the 232 interface, and COM2 represents the 485 interface. 3. View the touch ...

Open Kunlun Tongtai touch screen programming software and select the [Multi-language Configuration] icon in the edit menu In the pop-up Multi-Language Configuration window, select File and click Open. In the Multi-Language Configuration file drop-down menu, select Select Language. ...

The user usage system generated by the embedded version of MCGS consists of five parts: the main control window, the equipment window, the user window, the real-time database and the operation strategy. 1. Main control window: the main structure of the use system is structured. Used for ...

1. Do not hit with metal objects. Usually the HMI will be covered with a layer of glass to protect the screen and make it easy to touch. However, the glass is fragile, do not hit the screen with metal objects during use, it is easy to cause the glass to be scratched or broken. 2. Avoid squeezing the screen with heavy objects. Around HMI ...

1. The optical performance is the best. The clarity and light transmittance are the highest, the reflection is the least, and there is no color distortion, this is because the sound wave screen body is pure glass, unlike the resistive screen with multiple layers of composite film; The capacitive screen is coated with a layer of film on the surface, and the light transmittance is worse. 2. Anti-scratch and anti-barbaric use ...

1. Processor: Intel Celeron J1900 quad-core processor, frequency 2.0GHz, stable and reliable performance. 2. Operating system: Support Windows, Linux and other operating systems, and provide pre-installed software (such as remote monitoring software). 3. Display: 7 inch T...