As a special computer equipment in the marginal field, industrial computer has been more and more widely used in various occupations in recent years, but many professional bosses or users still have a relatively one-sided understanding of industrial computers, and it is easy to fall into the misunderstanding of selecting equipment when buying industrial computers. How does equipment affect industrial control ...

1. The hard disk is very slow when it is running, and there will be crashes; 2. When the industrial computer is started, the screen prompts that the hard disk cannot be found; 3. There is a rattling sound on the hard disk, and the system cannot be started; 4. The circuit board of the hard disk is burned or smoked; ...

PC (personal computer) is derived from IBM's first desktop computer type, PC, in 1978, which is a personal computer that can run independently and perform specific functions. Personal computers do not need to share resources such as processing, disks, and printers from other computers ...

With the growing demand for new technologies, in the development of touch products, capacitive touch screens are becoming larger and larger, and the use of writing devices similar to paper and pen has become more intuitive and convenient. The most common way manufacturers can support the function of a stylus is to use an active stylus ...

Embedded industrial computer can cooperate with the industrial system to complete one or more specific industrial missions in a small industrial site, with open modular structure, strong data processing capabilities, good software development environment and high-performance network and communication support. When the electrical function is fully ...

The motherboard is one of the key hardware of the industrial control host. The configuration of the industrial control computer system is connected to the socket of the motherboard to transmit data. The quality of the motherboard determines the stability of the entire system of the industrial control computer. In the process of using the industrial control motherboard, people may encounter such a situation ...

1. Turn on the power of the computer and the computer does not respond: 1. Check whether the power socket has power and is normally connected to the computer; 2. Check whether the computer power supply can work normally (whether the power fan rotates after turning on), and whether the display is connected to the host normally; 3. Turn over the machine ...

The power supply of the industrial computer can be used universally with the general power supply, but it is better to add a UPS power supply when using it. Industrial Personal Computer (IPC) is an industrial control accounting machine, which is a kind of bus structure that ...

Detection method and sequence of industrial computer failure not starting: 1. Check the three major operating conditions of the CPU Power supply clock reposition 2. Remove the BIOS and check whether the 22-pin chip selection signal has jumped 3. Try changing the BIOS and check the line connected to the BIOS 4 ...

The commonly used industrial control motherboards are ATX architecture, and there are four types of motherboards: ATX motherboards, MicroATX motherboards, mini-ITX motherboards and EATX motherboards. 1. ATX motherboard: ATX is a motherboard specification, which was formulated by Intel Corporation in 1995.

The total amount of industrial electricity has always accounted for most of China's electricity, so there are industrial control motherboard custom manufacturers have launched ultra-low-power industrial control motherboards, and the introduction of ultra-low-power industrial control motherboards will greatly reduce industrial electricity consumption and save industrial electricity consumption for China. So what is the ultra-low power industrial control motherboard?

Heat sinks are one of the top sources of noise in industrial computers. The more advanced and newer the industrial computer, the more complex the internal processor structure and the greater the heating. Therefore, the rationality of the heat sink design is related to whether the industrial computer can operate stably. We all know that the internal hardware of industrial computers ...

There are many reasons for disk problems, which are roughly divided into the quality problems of the disk itself and the problems caused by the operating environment. The quality of the disk itself, we can not deepen the study, as long as we start to do the control system, choose to buy a good quality, brand of hard disk ...

Memory is one of the important components of industrial computers, which is the bridge to communicate with the CPU. All programs in the IPC run in memory, so the quality of the memory has a great impact on the function of the IPC. Memory is also known as internal storage, memory is used to temporarily store data on industrial computers at high speeds, ...

There are too many automatic launch projects in the IPC system launch file; The disk may have bad tracks; The disk is fragmented; Too many junk files; The NIC is set incorrectly; Poisoning of industrial control all-in-one machines. In general, industrial computers ...

An industrial display is a display that uses industrial manipulation of a process or device. What makes it unique? The dustproof and shockproof special design uses an industrial-grade liquid crystal display. In higher-than-required cases, consider a wide temperature liquid crystal display. At present, there are only a handful of a few large foreign factories with higher ...

1. 4U industrial computer 4U IPC refers to a 19-inch rack-mounted IPC with a height of 4U and ATX architecture. U is a unit that represents the external scale of the server, which is an abbreviation for unit, and the specific scale is determined by the United States Electronics Industries Association (EIA). The reason why it is necessary to regulate ...

The first type: the BIOS of the Award 1 short - the system starts normally 2 Short - Conventional Fault 1 long and 1 short – RAM or motherboard makes mistakes 1 long and 2 short - the fault of the display or graphics card 1 long and 3 short - the keyboard controller is at fault 1 Long 9 Short - Motherboard Fla ...

The touch screen is a touch panel, which is generally matched with a liquid crystal display device as a touch display device. An industrial tablet PC is an industrial computer with a touch display device. Commonly used touch screens include resistive screens, capacitive screens, infrared screens, and external acoustic wave screens. ...

1. First put the body of the embedded industrial control all-in-one machine in a stable place, and accurately embed the base into the body. 2. Put on the screws, screw the screws into each eyelet, and confirm whether they are tightened. 3. Before cleaning the screen of the embedded industrial control all-in-one, stop using the equipment and unplug the power plug.

GPIO=General Purpose Input Output. GPIO port is a more important concept, users can interact with the hardware through the GPIO port (such as UART), manipulate hardware operations (such as LED, buzzer, etc.), read hardware operation status signals (such as ...