Heat sinks are one of the top sources of noise in industrial computers. The more advanced and newer the industrial computer, the more complex the internal processor structure and the greater the heating. Therefore, the rationality of the heat sink design is related to whether the industrial computer can operate stably.
We all know that the internal hardware temperature of the industrial computer is too high, and the system will be unstable, which directly leads to the failure of the industrial computer to operate normally, aging or even early obsolescence, so how to improve this problem?
1. Reduce the noise of the radiator
1. Silent radiator
The principle of the silent radiator is to add the fan speed, speed up the airflow, add the fan diameter, widen the air duct, add the wind area of the radiator, and add the fan diameter. Perhaps, the sector shape of the radiator could be optimized, and the drainage design could be applied to avoid the flow of ambient air rather than forcing air to flow.
2. Integration of radiator and chassis
Outside "cold" air passes through the various accessories of the industrial computer and is drawn in by the radiators at the front of the case and the radiators on both sides of the case. Eventually, part of the CPU's hot air is exhausted from the heatsink behind the chassis, and the other part is exhausted through the power heatsink. This design can increase the air volume of the radiator, improve the speed, effectively dissipate heat, reduce the noise of the radiator, and prolong the service life of the machine.
2. Speed control
The primary policy of heatsink fans is to meet the heat dissipation requirements of high-end high-load processors, but in practice, most of them use low-to-medium load and mid-range mainstream processors, and do not need to use the maximum speed to supply the maximum airflow, so many manufacturers will manipulate the speed to reduce the noise of the heatsink.
Nowadays, the use of industrial computers is becoming more and more extensive. Basically, all professions are involved. Noise industrial computers do not meet the needs of some users. Now it has been replaced one by one by the embedded fanless industrial computer.
Heat dissipation of embedded IPC:
The embedded industrial computer has no electric fan, and the heat dissipation method is adopted after central heating, and the noise is close to zero. It is suitable for scientific research places and office places, and completely solves the problems of insufficient heat dissipation and insufficient noise of traditional industrial control computers.
|
More on that
|
EVOC IPC common faults and solutions
● After booting up, the motherboard can work normally, and the BIOS detects the keyboard part, stating that the keyboard is wrong?
The first thing to see is whether the keypad lock is locked, and the keypad lock is exempted. If not, check whether the cable between the motherboard and the backplane and the keyboard and mouse are connected correctly.
...
|
|
EVOC industrial server products are used in the Federal Data Exchange System
First, the system overview
The federal data exchange system is mainly used for distributed data exchange in wide area networks, metropolitan area networks, and e-government networks. It is suitable for data gathering, data distribution, data exchange and sharing, etc. Major ...
|
|
EVOC made a wonderful appearance at the CIIF with its solutions
On September 19, the 20th China International Industry Fair with the theme of "innovation, intelligence and green" was held in the National Convention and Exhibition Center (Shanghai). As a well-known enterprise in the field of industrial automation, EVOC brings four major professional solutions: intelligent manufacturing, artificial intelligence, Internet of Things, and rail transit.
|
|
Detection method of industrial computer failure without booting - EVOC
Detection method and sequence of industrial computer failure not starting:
1. Check the three major operating conditions of the CPU
Power supply
clock
reposition
2. Remove the BIOS and check whether the 22-pin chip selection signal has jumped
3. Try changing the BIOS and check the line connected to the BIOS
4 ...
|
|
EVOC's IPC-620H won the 2017 Product Award
On November 8th, the 2017 (6th) Global Automation and Production Theme Summit, co-sponsored by the internationally renowned industrial media CONTROL ENGINEERING China and PLANT ENGINEERING China (referred to as CEC and PEC), was grandly held at Howard Johnson Kinguyuan Hotel in Shanghai.
|
|
Advantech's industrial computer is basically used and maintained
Advantech's industrial control equipment is used and maintained.
Error handling is first-come, first-served.
First of all, we must understand and then familiarize ourselves: first analyze and consider the possible problems according to the on-site situation, and then we can do it;
First cleaning, then repairing: practice has shown that very ...
|
|
The interconnection method of PCB circuit boards - EVOC
The cable connection between the two PCB printed boards is not easy to present connection errors, and the relative orientation of the two PCB printed boards is not constrained.
Direct welding between printed boards, this method is often used for the connection between two printed boards at an angle of 90 degrees. Articulated to become a whole PC...
|
|
IPC Failure and Treatment——EVOC
1. Turn on the power of the computer and the computer does not respond: 1. Check whether the power socket has power and is normally connected to the computer; 2. Check whether the computer power supply can work normally (whether the power fan rotates after turning on), and whether the display is connected to the host normally; 3. Turn over the machine ...
|
|
The application of EVOC products in the Internet of Things
On March 19, 2021, the 2021 CAIMRS and Annual Selection and Awards Ceremony of China's Production Digital Service Summit hosted by Industrial Control Network was held in the form of real-time live broadcast in the cloud, and the results of the 19th Automation and Digitalization Annual Selection were released. Turck has once again been named one of the "Top 10 Companies of the Year".
|
|
Methods for judging the performance of industrial switches - EVOC
Industrial AC machines are now more and more ubiquitous, and many relatively harsh and complicated working environments basically rely on industrial AC machines to develop data information communication networks. However, there are a lot of various industrial AC machines on the market, and if the company assigns you to buy a batch of AC ...
|
|
The difference between industrial computers and industrial servers - EVOC
Industrial computer, also known as industrial computer and industrial computer, is mainly used in industrial sites to monitor and control the machinery and equipment, production processes, data parameters, etc. used in the production process, and can be used as an industrial controller to operate reliably in various environments. IPC I/O interface abundant ...
|
|
EVOC has advantages over ordinary computers
1. The industrial computer chassis is made of aluminum alloy structure, which has the characteristics of efficient dustproof, anti-magnetic and shock-proof compared to general computers;
2. The chassis is equipped with PCI and ISA slots.
3. Set up a targeted independent power supply in the chassis, ...
|
|
EVOC EIS-2209-FT, what kind of server is it?
A general-purpose server that is responsible for receiving, processing, and processing large amounts of data is of great importance to users. Through repeated optimization and multiple tests, we finally won the first battle, and EIS-2209-FT made its debut in the C position!
22 ...
|
|
EVOC motherboard recommends model ECO-1816.
EVOC motherboard ECO-1816 features:
1) The motherboard adopts IntelH61/B65 chip structure, supports XP system and 2003Server server system, and the highest configuration is I7-3770.
2)2*240pinDDR3 dual channel ...
|
|
Industrial computer start-up alarm, listen to the sound analysis of the alarm - EVOC
The first type: the BIOS of the Award
1 short - the system starts normally
2 Short - Conventional Fault
1 long and 1 short – RAM or motherboard makes mistakes
1 long and 2 short - the fault of the display or graphics card
1 long and 3 short - the keyboard controller is at fault
1 Long 9 Short - Motherboard Fla ...
|
|
How EVOC chose a high-speed data acquisition card
When choosing a high-speed data collection card, you can generally consider the following goals:
Sample rate, resolution, number of channels, bus, etc. The selection of the key depends on what your high-speed data collection card is for, so as not to blindly select the data collection card. Because different data collection cards are used in places that do not ...
|
|
Industrial computer hard disk class failure - EVOC
1. The hard disk is very slow when it is running, and there will be crashes;
2. When the industrial computer is started, the screen prompts that the hard disk cannot be found;
3. There is a rattling sound on the hard disk, and the system cannot be started;
4. The circuit board of the hard disk is burned or smoked; ...
|
|
EVOC IPC boot no display fault solution
The motherboard of the industrial computer (referred to as the industrial control motherboard) is an industrial computer motherboard used in industrial occasions, which can get used to a wide temperature environment, a harsh environment, and a long-term high-load operation according to the needs. It may be due to the harsh working environment of its application, so the industrial computer motherboard ...
|
|
EVOC industrial control vehicle radar automatic detection
With the modernization, high-tech and sophistication of electronic equipment, it is necessary to rely on an automatic testing system to complete the on-site rapid testing of electronic equipment. The radar automatic test system is based on the "PCI bus test software channel", aiming at the needs of the radar machine test.
|
|
The difference between PCI slot and PCI-e slot in EVOC industrial computer
When selecting industrial computers, we often encounter PCI and PCI-e expansion slots, what are the differences between the two?
1. The color is different. In IPC motherboards, the PCI slot is milky white, while the PCI-e slot is black.
2. The transmission rate is different. PCI slot max data ...
|
|
Contact
working hours
