First of all, it is necessary to give EVOC industrial computer a stable working environment. If there is a sensation when the machine reads and writes to a disk or hard disk, the drive will be severely worn or damaged. If you want to place it against a wall, there should be at least a gap from the wall to ensure good heat dissipation.

In fact, there is not much difference between the industrial computer and the general computer, only the power supply and the motherboard are nominally more stable and reliable than the general computer, after all, the requirements of the industrial site are a little higher than the civil one, the so-called industrial computer encounters the same problems as the general computer, such as the black screen of the crash can not be started ...

1. PCI is the abbreviation of Peripheral Component Interconnect (Peripheral Component Interconnect specification), which is the main expansion slot of industrial computers, and it is also the type of slot with the most on the board of industrial motherboards.

1. IPC (PC bus industrial computer): IPC is an industrial computer based on PC bus, which is widely used, and its main components are industrial chassis, passive base plate and various boards that can be pierced into it. For example, the domestic industrial computer GA-A3204 launched by high-energy computer has reliability, ...

When choosing a high-speed data collection card, you can generally consider the following goals: Sample rate, resolution, number of channels, bus, etc. The selection of the key depends on what your high-speed data collection card is for, so as not to blindly select the data collection card. Due to the different data collection cards used in the local ...

One. How to use the case fan correctly --- importance of the direction of the case fan If you find that the fan is installed, the heat dissipation performance of the host is not improved or even becomes worse, it is likely that the direction of the fan is reversed.

1. Central Processing Unit (CPU): The core component of the industrial computer is the central processing unit, which is responsible for executing the instructions in the computer program, controlling and coordinating the operation of various hardware devices. Industrial computers generally use high-performance multi-core processors to satisfy the messy real-time control tasks. 2. ...

Machine vision is a skill that uses computer and various sensor skills to complete the understanding and processing of drawings, videos, or other visual data. It is mainly composed of industrial cameras, light sources, industrial computers and corresponding picture analysis software systems. Machine vision is used in the manufacturing industry ...

Appearance: The industrial computer is generally a closed chassis, with industrial wind planning, solid structure, waterproof, dustproof, seismic and other characteristics. Desktops, on the other hand, generally use open chassis, general wind planning, and relatively simple structure. Function: Industrial computer generally uses embedded system planning, ...

The embedded industrial computer can complete one or more specific industrial tasks in a small industrial site with the industrial system, and has the characteristics of open modular structure, strong data processing capabilities, outstanding software development environment, and high-performance network and communication support. When the electrical function is fully ...

Vibrating Due to the different application occasions of embedded industrial computers, such as wall-mounted and vehicle-mounted, the vibration may be strong in the process of use, and special anti-vibration treatment is required for embedded industrial computers, such as the use of solid state drives, memory and other accessories for reinforcement treatment. compatibility ...

During the use of the industrial computer, the user mistakenly deleted the system file, resulting in an abnormal function of the industrial computer; The industrial computer was invaded by viruses and Trojans, resulting in system problems; Some fault prompts frequently pop up on the desktop, and the industrial computer needs to be reinstalled in the system. Strictly speaking, the industrial computer presents ...

The temperature is not suitable for the maintenance of the hard drive, if the case temperature reaches 30 degrees Celsius, the temperature of the internal hard drive will reach 40 degrees or higher. We can briefly DIR our industrial computer to achieve the effect of reducing the ambient temperature. 1. Replace high-power CPU and hard disk fan (hard disk fan to...

When selecting a high-speed data acquisition card, the following goals are generally considered: Sample rate, resolution, number of channels, bus, etc. The selection of the key depends on what your high-speed data acquisition card is for, so as not to blindly select the data acquisition card. Because different data acquisition cards are used in different places ...

In fact, there is not much difference between the industrial computer and the ordinary computer, but the power supply and motherboard are nominally more stable and reliable than the ordinary computer, after all, the requirements of the industrial site are a little higher than the civilian one, and the so-called industrial computer encounters similar problems to ordinary computers, such as the black screen of the crash can not be started ...

1. The industrial computer chassis is made of aluminum alloy structure, which has the characteristics of efficient dustproof, anti-magnetic and shock-proof compared to general computers; 2. The chassis is equipped with PCI and ISA slots. 3. Set up a targeted independent power supply in the chassis, ...