1. Soft up
The direct launch of the inverter motor has a serious impact on the power grid, and it will also have too high requirements for the capacity of the power grid, which is extremely unfavorable to the service life of equipment and power grid circuits. After the use of inverter energy saving, the use of inverter speed regulation (V/F) function will make the starting current from small to large, strictly control the peak current, and the maximum normal operating current will not be higher than the rated current, which reduces the impact on the power grid and prolongs the service life of the equipment. The inverter can be used as a soft start, but the soft start cannot be used as a frequency converter, so the inverter is more expensive than the soft start
Second, speed regulation
Inverter speed regulation refers to the communication of asynchronous motors. The speed of the motor is related to the frequency of the communication electricity, that is to say, as long as the frequency can be changed to reach the change speed, so the inverter first converts the communication power into direct current and then converts it into a freely adjustable (0-50HZ0) communication electricity, so as to achieve the purpose of motor speed regulation, of course, the output voltage and current of the inverter become higher with the increase of frequency.
The power frequency power supply of the inverter is generally 50Hz or 60Hz, whether it is in the household field or the production field, the frequency and voltage of the power frequency power supply are stable and unchanged. The motor operating with the power frequency power supply may form a decrease in power when regulating the speed, and after the adjustment of the inverter, the motor can reduce the power loss when the speed is regulated.
3. Energy saving
The reason why the inverter can achieve the role of power saving and energy saving in most cases is that the frequency converter controls the speed of the motor, but in fact, most of the speed regulating equipment can reach this role, so it is significant that we can not determine that the inverter is an energy-saving product.
The condition for the inverter to complete the power saving is the speed regulation characteristics of its load, those spare parts that have a greater impact on the power, such as centrifugal fans and centrifugal water pumps, etc., the conditioning effect of the inverter is significantly better than the conditioning effect after its own speed regulation operation, and the inverter can actually achieve the role of energy saving and power saving under such conditions.
If the spare parts handled by the frequency converter are constant torque loads or even constant power loads, then in the case of a decrease in speed, the power drop is not significant or the power remains stable, so the use of the frequency converter can not achieve the same energy-saving effect as before, and even can not save electricity at all.
Whether there is a big difference between the power of the variable frequency governor and the power of the digital DC governor, this problem also needs to be considered in combination with the actual situation, under some conditions, the DC motor is higher than the power of the communication motor and the power factor is higher, so the communication asynchronous motor and the frequency conversion governor are not more energy-efficient than the DC motor and the DC governor.
Fourth, maintain strong
Short-circuit maintenance to ground, short-circuit maintenance, phase-to-phase maintenance, input phase loss maintenance, output phase loss maintenance, overvoltage maintenance, undervoltage maintenance, temperature maintenance, input and output reverse connection maintenance. Overcurrent, heat sink overheating, external alarm, overheating inside the inverter. Brake electric, resistance overheating, motor overload, inverter overload, DC fuse break, memory abnormality, keyboard panel communication abnormality, CPU abnormality, option abnormality, forced stop, output circuit abnormality, charging circuit abnormality, RS485 communication abnormality.
Fifth, the degree of automation has been improved
The control function of the inverter is now very complete, and it can cooperate well with other control equipment and instruments to complete the centralized real-time supervision and control of systematic networking, such as cooperative DCS, PLC, servo drive, etc., which greatly improves the automation degree of production line equipment
|
More on that
|
Meaning and classification of LS Electronic Motor Relay (EMPR).
The Electronic Motor Relay (EMPR) is a digital motor maintenance relay with an MCU that has a compact and compact form factor that can be combined directly with a contactor. Through the implementation of real-time data processing, high reliability and high precision can be completed, and it can pass through phase loss, reverse, unbalance, stalled rotor, connection...
|
|
The impact of power quality problems on frequency converters - electricity production
(1) Excessive voltage error will increase the loss of electrical equipment, shorten the life, and work abnormally, which will damage the stability of the synchronous operation of the power system, the stability of the voltage and the economic operation of the power grid, and will cause the inverter system to report overvoltage fault or undervoltage fault.
...
|
|
An integral part of an electrical solid state relay
Solid state relays consist of three parts: the input circuit, the barrier (coupling), and the output circuit.
Input Circuit:
According to the different categories of input voltage, the input circuit can be divided into DC input circuit, communication input circuit and AC-DC ...
|
|
Fault solution for three-phase asynchronous motor - LS power generation
1. The motor cannot roll after being energized, but there is no abnormal noise, no peculiar smell and smoke.
1. Cause of the problem: (1) The power supply is not connected (at least two phases are not connected); (2) Fuse blowing (at least two-phase blowing); (3) The overcurrent relay is adjusted too small; (4) The wiring of the control equipment is faulty.
2. Question ...
|
|
The basic principle of motor protector selection - LS power production
The fundamental method of motor protector selection
At present, there is no unified standard for motor protectors on the market, and almost every manufacturer has its own type standard. In order to meet the needs of different customers, manufacturers derive many products with different uses, and a wide range of products for the majority of users to choose ...
|
|
The choice of inverter power - LS produces electricity
1. The power value of the inverter is the most suitable for the power value of the motor, so as to facilitate the operation of the inverter at a high power value.
2. When the power classification of the inverter is not the same as the power classification of the motor, the power of the inverter should be as much as possible.
|
|
PLC installation and wiring skills - LS power generation
The PLC should be kept away from strong disturbance sources such as electric welding machines, high-power silicon rectifier equipment and large-scale power equipment, and cannot be installed in the same switch cabinet as high-voltage electrical appliances.
Power cables, control cables, and PLC power cables and I/O cables should be separated from the wiring ...
|
|
The cause of motor burnout caused by inverter - LS generates electricity
In fact, the problems of the motor are not the cause of the motor itself, most of them are caused by the non-standard debugging of the inverter or the wrong inverter motor when the inverter motor is used, etc., mainly due to the following situations:
1. Put the general motor ...
|
|
Common faults and countermeasures of power inverters
1. OC failure
Like other inverters, overcurrent alarm is also a common fault of power inverter, in addition to the reasons for parameter settings such as acceleration and deceleration time, there are mainly the following possibilities in hardware: damage to high-power modules may cause OC alarm, low-power economical inverter ...
|
|
Advantages and disadvantages of LS inverter non-sensing vector control
The first generation of LS inverter selects the voltage frequency ratio scalar control method, which carries out frequency conversion speed regulation according to the linear ratio determined by the equivalent circuit of the asynchronous motor. Voltage refers to the effective value of the fundamental wave, and changing U/f can only regulate the steady-state magnetic flux and torque of the motor, not to mention dynamic control. In order to improve the low ...
|
|
Specifications for the use of power converters
Operating regulations for power inverters
Maintenance & Installation
Work according to the weight of the product.
The number of inverter boxes cannot be stacked in excess of the specified number.
Install according to the user manual.
Do not open the case during transport.
Do not place ...
|
|
Inverter switching power supply circuit vein - LS power generation
1. Vibration circuit: the drainage-source and R4 of the main winding N1 and Q1 of the switching transformer are the channels for the working current of the power supply; R1 provides the starting current; The self-powered windings N2, D1, and C1 constitute the power supply voltage of the vibrating chip. The normal operation of these three links is the prerequisite for the power supply to vibrate.
|
|
How LS produces power PLC operation
Although many relays, timers and counters are often used in the ladder diagram programs used by LS PLC, LS PLC does not have these hardware physically, but uses memory and program programming methods to make logic control modifications, and connects external machines through output components.
|
|
The basic component of the inverter is LS power generation
The inverter is usually divided into 4 parts: the rectifier unit, the high-capacity capacitor, the inverter and the controller.
Rectifier unit: converts alternating current with a fixed operating frequency into direct current.
High Capacitance: Stores converted electrical energy.
...
|
|
Introduction of LS PLC programming software
LS PLC programming software is a professional PLC programming assistant tool, providing excellent interface, which can carry out PLC programming operations such as online modification, debugging and self-diagnosis, packing and debugging, etc., compatible with LG Master-K series and LG MASTER-K series, which can make you in the process of processing in a timely manner.
|
|
LS produces common sense of electroplastic case circuit breaker
(1) Tripping
LS electric molded case circuit breaker basically involves the tripping unit in the process of practical application, and the tripping is generally a tripping method of thermomagnetic tripping or electronic tripping.
In the process of practical application, if it is a ...
|
|
Relationship between motion control and frequency converter
Motion control has a significant period characteristic, it is a combination of a variety of high-tech to push industrial automation, office automation and home automation to a higher stage. At present, the motion control is mainly composed of three parts: inverter, motor and controller.
...
|
|
Electricity-producing permanent magnet AC contactor structure
The contactor is mainly composed of a drive system, a contact system, an arc extinguishing system and other parts.
1. Drive system: The drive system includes electronic modules, soft iron, and permanent magnets, which is an important part of the permanent magnet contactor.
|
|
Interference phenomenon of LS power inverter
1. As soon as the inverter of the heat exchange station is opened, the pressure transmitter jumps randomly;
2. In the water supply controlled by the inverter, the pressure transformer is used as a signal to collect the pressure, and the pressure transformer is disturbed by the inverter;
3. When the inverter starts the motor, the voltage converter signal is unstable and beats violently;
4. Pressure transformer (4-20 ...
|
|
How LS PLC works
Although many names such as relays, timers and counters are often used in the ladder diagram programs used by LS PLC, LS PLC does not have these hardware physically, but uses memory and program programming to do logic control and editing, and connects to external machines through output components.
|
|
Contact
working hours
