Fisher/Fisher 8580 High Performance Butterfly Valve

The Fisher Model 63EG Pilot-Operated Pressure Relief Valve can be used in both liquid and gas applications. The 63EG is also suitable for throttling back pressure or bypass applications. Both main valves use quick-change spool packs for quick maintenance. For remote monitoring, the Model 63EG valve can be used with position monitoring.

The Fisher CAV4 valve is designed for clean, cavitation applications with a pressure drop of more than 207 bar (3000 psi). The Cavitrol™ IV trim in the valve is designed to extend the flow area. Each trim stage has a sequentially increasing flow zone. This guarantees a very ...

The 1301 series is a high-pressure pressure regulator used to supply air to instruments. It is equipped with a pressure gauge interface and can be equipped with a pressure gauge as an option. Connection size: NPS 1/4 Regulated pressure range: .0.69 to 34.5 bar/10 to 500 psig Maximum inlet pressure: 414bar/6000psig This article describes the fee ...

Y602 Series ventilation assemblies help prevent vent obstruction and ensure proper air or gas flow in regulator spring housings, remote ventilation ducts, actuator membrane housings, and other applications. These ventilation components are available in angled or straight-through versions. In general, angular ventilation components protect the side ...

It is suitable for steam turbine drainage and steam exhaust applications. peculiarity Forged body. Bonnet/body integrated design. Tungsten-chromium-cobalt alloy Stellite seat. Pilot valve plate. Dustproof casing on the upper part of the actuator. Easy conversion to actuators. Valve position indicator is available Small driving force. ...

　Introduction: The Fisher/Fisher Model R222H is a one-stage regulator that offers 65% higher flow and 40% smaller volume than standard compact regulators for use in underground tanks or airchambers where space is limited. Approved by Underwriters Laboratories (UL) (United States Safety Testing Laboratories Inc. ...

The FIELDVUE™ DVC6200f fieldbus digital valve controller is certified for non-flammable, intrinsically safe, fireproof, and explosion-proof applications. The digital valve controller is available for both single- and double-acting actuators. The FIELDVUE Digital Valve Controller provides online valve diagnostics and is the first of the most important examples of Emerson's Valve Controllers.

Introduction: The Fisher/Fisher Vee-Ball™ V200 control valve has a hemispherical construction valve with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve, with a V-notch ball core and a spherical seal ...

The Fisher ATST desuperheater is a state-of-the-art solution for desuperheating applications where atomization performance and amplitude of variation are critical. ATST nozzles atomize water through steam atomization to form tiny water droplets that evaporate rapidly over a wide range of vapor flows and conditions. specification Certificates: PED, CRN ...

Introduction: The Fisher/Fisher V250 control valve has a hemispherical construction valve with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve, and the shear action between the V-notch ball core and the spherical seal improves the valve's ...

Fisher's 627 Series direct-acting pressure reducers are suitable for use in both low- and high-pressure systems. These regulators can be used with natural gas, air, or a variety of other gases. Performance characteristics vary according to the structure. peculiarity Internal pressure relief valve Model 627R and 627MR stroke limiters Discharge Operation Indicator ...

Introduction: The Fisher/Fisher D2T valve is best suited for use as a dump valve for gas separators and scrubbers. It is also suitable for other high-pressure applications in natural gas production, compression and processing. 　　Features: Optional 1 NPT end connection. Have a C ...

The WhisperTube is a passive reactance silencer that is installed downstream of a control valve or other device that generates system noise. The pressure drop across the device has a negligible effect on the WhisperTube, so the system can be reduced in a wide range of operating conditions without impacting flow or process. Peculiarity...

The Fisher easy-e ET is the ideal solution for all high process temperature general applications, with a balanced plug design and cage guided trims. Available with straight-through or angled bodies, these valves provide up to Class V or Level VI shut-off specification Certified to SIL, fugitive emissions, N...

Fisher CAV III Micro-Flat trims are designed for cleaning, cavitation, and low flow applications with a maximum pressure drop of 241 bar (3500 psi). This product is a combination of two different products: cavitation control with Cavitrol III trims and Micro-Flat ...

Fisher Cavitrol III trims are designed for clean, cavitation applications with a maximum pressure drop of 207 bar (3000 psi). The cage in the trim includes a large number of specially shaped, radially arranged holes to reduce turbulence and maintain the overall pressure drop, thereby controlling or eliminating cavitation.

The cryogenic valve is a straight-through, single-port valve with stainless steel construction and welded extension bonnet. The EWT-C valve is designed to be pressure balanced. These cryogenic valves are designed to provide throttling or on-off control of liquids and gases at temperatures as low as -198°C (-325°F). According to...

The Fisher EZ-OVT trim is a dual-seated trim designed for long-term, tight shut-off in on/off applications where fluids contain particulates, such as catalyst powders. These valves are suitable for controlling and cleaning hydrogen used in the refining process of UOP Continuous Catalyst Regeneration (CCR).

Fisher 3610J Pneumatic Single Acting Valve Positioner with ET Control Valve 667 657 Pneumatic Actuator Type: Pneumatic, single-acting valve positioner specification Regional classification: Group II Class 2 gases and dusts are ATEX compliant, and Group II/Class 2 equipment is CUTR compliant Authentication:...

The Fisher CVX steam control valve is designed to handle medium and heavy duty applications in today's cycle power plants, while providing precise pressure and temperature control for process applications. The CVX design combines a nozzle header with multiple forms of AF nozzles to produce better ...