Fisher/Fisher V250 Control Valve Features linear

The Fisher CAV4 valve is designed for clean, cavitation applications with a pressure drop of more than 207 bar (3000 psi). The Cavitrol™ IV trim in the valve is designed to extend the flow area. Each trim stage has a sequentially increasing flow zone. This guarantees a very ...

The Fisher HP Series Control Valve is a single-port, high-pressure, globe or angle valve with a metal seat, cage guide, and push-down to shut-off plug action. These valves are designed for high-pressure applications in the process control industry, such as power generation, hydrocarbon production, chemical processing, and oil refining. ...

The Fisher 3570 Pneumatic Valve Positioner works in conjunction with the control valve assembly to provide accurate stem position proportional to the input signal received from the control device. These positioners are typically used in conjunction with pneumatic piston actuators. However, there are some types of products within the 3570 series that can be ...

The Fisher Yarway 25 VenTemp desuperheater is primarily used in low-volume superheated steam systems with fairly constant loads. The design provides a simple, cost-effective method of steam temperature control. specification Critical maintenance steam conditions The flow characteristics are linear Materials: 304 stainless steel, 316 ...

The DMA/AF-HTC is functionally identical to the DMA/AF, but its construction is suitable for more demanding applications. The most common applications include interstage tempering of boilers, where desuperheaters are exposed to vibrations caused by high thermal cycling and pressure, high steam velocity, and flow. In addition to this specific application ...

The Model 252 filter is designed to clean supply gas or air in a pilot, pneumatic instrument, or other device that requires clean gas to function properly when it is about to enter a pilot-acting regulator. This is an extended version of the filter with a larger drainage chamber that can hold more moisture and ...

The Fisher Whisper Trim I cage provides control of aerodynamic noise, especially in water, gas, or steam flow applications. The Whisper Trim I valve cage utilizes multiple specially shaped, dimensional, and spaced orifice to remove the noise generated by the water, gas, or steam flowing through the control valve.

The Fisher 656 diaphragm actuator provides low- to medium-thrust actuation for stent-mounted applications. Such applications include the operation of butterfly valves and built-in turbine valves, louvers, dampers, and other similar equipment. specification Actuation mode: spring return, linear Certified PED, CUTR, ATEX Control...

The EZH (Spring Closed) and EZHSO (Spring Open) series regulators are precision-piloted, pressure-balanced soft-seat regulators. These regulators are used for high-pressure natural gas transmission/city gate stations, high-flow distribution systems, and power plant gas supply. They have the ability to run smoothly and ...

Description: The Fisher/Fisher Model S402Y Pressure Regulator Direct Acting Reed Regulator provides economical pressure reduction control in corrosive environments in a variety of residential and small commercial applications. Typically, the Model S402Y is used to reduce the pressure of gas distribution to 4.5 in w.c. to 2.5 ps ...

Description: The Fisher/Fisher 67C series of high-pressure regulators is a high-pressure regulator for a variety of liquid or vapor applications. The Series 67C basic regulator is equipped with wrench adjustment, handwheel adjustment, dial adjustment pattern with calibration scale or non-adjustable vandal spring ...

Introduction: The Fisher/Fisher OSE quick shut-off valve quickly shuts off the airflow in the event of overpressure or loss of pressure. It is ideal for applications that require complete cut-off protection, precise sealing, fast response, high impact and shock resistant gases, top-mounted design, easy in-line maintenance, and savings.

The Fisher 3610JP pneumatic positioner can be used with a double-acting rotary actuator to locate control valves used in throttling applications. These positioners are rugged and provide valve positioning proportional to the pneumatic input signal or DC current input signal and as a whole ...

Introduction: The Fisher/Fisher 8560 High Performance Butterfly Valve Eccentricity Mounted Butterfly Plate Design provides near-linear flow characteristics; The butterfly plate rotates by 90 degrees and is suitable for switching or throttling control applications. 　　Features: Trim and bolt materials are suitable for acidic applications. ...

The 627 series regulator is a direct-operated regulator that can be used in low and high pressure systems, in small towns or small urban gas stations for regulation, regulation and bleed valve systems, monitoring regulator systems, or for high-pressure industrial gas stations. Fisher Fisher 627 Series Straight ...

Introduction: Fisher/Fisher YD and YS 3-way cage pilot valves are designed for throttling or on/off service and are available in balanced and unbalanced configurations. YD valves are used in general merging and diverting applications. YS valves are used in general merging applications. Fisher YD and YS valves are used in a wide range of applications, including oil ...

Introduction: Fisher/Fisher Control-Disk™ rotary valves have excellent regulation performance. Compared to segmented ball valves, its equal percentage flow characteristics allow for a wider range of adjustments. This improved performance allows the valve to be controlled without process interference, allowing for better control of the target.

The 670 Series Panel Mount Regulator is a compact and rugged unit designed primarily for manually loaded pressure-balanced gas regulators to provide manual control of the diaphragm actuator control valve. peculiarity Control flexibility Easy fingertip control Easy to connect specification Maximum inlet pressure without shear ...

It can produce up to 5.3 kN (1,200 lbf) of thrust, depending on the construction. Depending on the size, travels up to 105 mm (4 1/8 inches) are available. The actuator base has four screw holes that allow for the installation of brackets or plates. With a wide selection of springs, it is suitable for almost any ...

Fisher 3610J Pneumatic Single Acting Valve Positioner with ET Control Valve 667 657 Pneumatic Actuator Type: Pneumatic, single-acting valve positioner specification Regional classification: Group II Class 2 gases and dusts are ATEX compliant, and Group II/Class 2 equipment is CUTR compliant Authentication:...