Fisher/Fisher DST-G trims

The 63EG-98HM can be used in gas, liquid, or vapor applications. Suitable for applications up to 550°F / 288°C, Model 63EG-98HM utilizes high-temperature ethylene propylene diene diene monomer (EPDM) or perfluoroelastomer (FFKM) to provide Class VI shut-off. If used in corrosive conditions, the ...

Introduction: The Fisher/Fisher V250 control valve has a hemispherical construction valve with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve, and the shear action between the V-notch ball core and the spherical seal improves the valve's ...

The V200U is designed to be flangeless and offers many of the benefits of the V150, V200 and V300 B Series Vee-Ball proven valves, plus a smaller, more compact face-to-face design. The waveform segmented V-groove ball keeps work smooth, clog-free, and the ball and durable HD ...

The Fisher V270 is a three-piece, full-bore control valve fitted with a bottom shaft designed from the bottom up to optimize pressure, flow, and process control. The V270 full-bore ball valve provides automated control in bypass, batch application, monitor, and emergency shut-off valve applications with virtually no ...

The Series 912 direct-acting, spring-loaded regulators are United States Safety Testing Laboratories Corporation (UL) certified regulators for use in a variety of applications and industrial applications. The valve membrane of these regulators has some internal pressure relief to help minimize overpressure. peculiarity ...

Fisher's CS400 Series direct-acting spring pressure regulators are designed to meet a wide range of pressure reduction applications in commercial and light industrial facilities. The regulator offers a great deal of flexibility because it is available in a variety of body sizes and end connections, outlet pressure settings, orifice sizes, and ...

Fisher Micro-Flat cavitation trims are designed for clean, cavitation, and low flow applications with a maximum pressure drop of 51.7 bar (750 psi). Rather than eliminating cavitation, the trim is designed to control where it occurs to minimize losses. specification Certified in accordance with SIL ...

The Fisher DVI desuperheater is injected with a water jet at the venturi outlet section to ensure thorough mixing as well as rapid atomization. DVI desuperheaters can be easily installed between flanges in steam pipes from DN25 to DN600 (1 to 24 inches). No moving parts, water fill mode for fast, ...

Fisher CAV III Micro-Flat trims are designed for cleaning, cavitation, and low flow applications with a maximum pressure drop of 241 bar (3500 psi). This product is a combination of two different products: cavitation control with Cavitrol III trims and Micro-Flat ...

The Fisher DMA/AF is a multi-shaped, mechanically atomized, backpressure-activated superheater interstage desuperheater. Designed for applications that require control of moderate load fluctuations and high thermal cycling. specification Certified PED, CRN Severe service steam conditioning Materials SA105, F22, F91 Job...

Flexible module design – The 3582 Series units can be upgraded to the Model 3582i Electro-Pneumatic Positioner in the field to replace the measurement module with the Model 582i Electro-Ptic Converter Assembly (1). The Type 582i electric-gas converter is attached to the housing of the positioner and provides a very economical ...

The Model R622H regulator is certified by Underwriters Laboratories (UL), United States Safety Testing Laboratories, Inc., for use in LPG two-stage pressure regulating systems. The outlet pressure of the liquefied gas storage tank is reduced to 10 psig / 0.69 bar after being regulated by a pressure regulator. peculiarity Build...

Fisher Cavitrol III trims are designed for clean, cavitation applications with a maximum pressure drop of 207 bar (3000 psi). The cage in the trim includes a large number of specially shaped, radially arranged holes to reduce turbulence and maintain the overall pressure drop, thereby controlling or eliminating cavitation.

Fisher Yarway probe TempLow desuperheaters automatically introduce cooling water into the steam stream based on pneumatic or electrically controlled signals, providing precise and cost-effective control of steam temperature. specification Critical maintenance steam conditions Equal percentages of flow characteristics, linearity, corrections, etc Operating temperature ...

Introduction: Fisher/Fisher NotchFlo™ DST control valves are designed for use in dirty, cavitation applications. The trims in this valve utilize a range of flow restrictions and extensions to eliminate cavitation, allowing particles up to 12.7 mm (1/2 in) in diameter to pass through without clogging. ...

Fisher's GX valve and actuator systems meet a wide range of flow and line options. Optional tee structure for precise temperature control. The channels designed inside the body provide the best possible capability to create a stable flow pattern for smooth operation. Emerson Fisher Valve ...

The Fisher Model 630 Big Joe™ Regulator is a direct-acting, spring-loaded decompression regulator with body sizes NPS 1 & 2 / DN 25 & 50 for a maximum inlet pressure of 1500 psi/103 bar and an outlet of 3-500 psi/0.21-34.5 bar ...

Turnkey valve operating system with pneumatic rack and pinion actuators, controls and mounting brackets. Function: Turnkey all-in-one actuator with control and mounting device specification Power source: Pneumatic Product Type: Pneumatic Actuator Actuation Valve ...

F1 ELDVUEDVC6000 Series Digital Valve Controller (Fig. 1) and Actuator. The digital valve controller receives the valve stroke position in Figure 2) is a communicative, microprocessor-based conversion of electrical signals into feedback, as well as air supply pressure and pneumatic pressure of the actuator. This makes ...

The Fisher Model SR5 Regulator is a compact, high-flow, self-acting pressure reducer. It is designed for applications where hygienic design is extremely important, such as in the pharmaceutical, biotechnology or food and beverage industries. The unit is available in body sizes NPS 1/2 to 3 / DN 15 to 80 as well as ...