Fisher/Fisher Model 630 Regulator

Introduction: The Fisher/Fisher V500 Eccentric Plug Valve combines the robustness of a ball valve with the high efficiency of a rotary valve. It is designed to control corrosive, coking, and other difficult liquids, providing throttling or on/off operation. 　　Features: Self-centering seat rings ...

The Fisher 3610JP pneumatic positioner can be used with a double-acting rotary actuator to locate control valves used in throttling applications. These positioners are rugged and provide valve positioning proportional to the pneumatic input signal or DC current input signal and as a whole ...

Introduction: Fisher/Fisher GX control valve and actuator systems are designed with state-of-the-art technology in a small form factor for a wide range of process gases, vapors, and fluids, and are rugged, reliable, and user-friendly. It does not need to adjust the size of the actuator, once the valve ...

Available in lead-free versions to comply with the Safe Drinking Water Act, cryogenic models can control cryogenic fluids, including liquid nitrogen (-320° F/-194° C), liquid argon (-303° F/-184° C), and liquid oxygen (-297° F/-181° C) for washing machines, boilers, and thermal applications.

1 NPT end connection CL900 (2250 psig) pressure rating FloPro field selectable flow rates for 1/4, 3/8, and 1/2" port sizes Rugged alloy 6 trim for use in corrosive applications Full 2250 psig pressure drop capability Suitable for NACE ...

Introduction: The Fisher/Fisher A11 High Performance Butterfly Valve is a reliable, high-performance butterfly valve for throttling and switching applications. Available in a pair of clamp or single flange designs to maintain tight shut-off over long periods of time, the valve is specific for a wide range of pressure and temperature conditions, including cryogenic applications.

THE FIELDVUE DVC6200 DIGITAL VALVE CONTROLLER IS A HARTR COMMUNICATION INSTRUMENT USED TO CONVERT A TWO-WIRE 4-20 MA CONTROL SIGNAL INTO A BAROMETRIC OUTPUT FOR SUPPLY TO THE ACTUATOR. It can also be easily retrofitted to replace most Fisher and non-Fisher pneumatic actuators...

Introduction: The Fisher/Fisher Vee-Ball™ V300 Flange Control Valve features a hemispherical valve with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve.

Fisher DST-G trims are designed for clean or dirty applications where dissolved gases are released from solution when pressure drops (outgassing). Outgassing typically causes two types of damage: cavitation and erosion of the fluid stream. The DST-G trim has a graded pressure drop, similar to the DST trim, to prevent ...

Introduction: The Fisher/Fisher Vee-Ball™ V150S flanged control valve has a hemispherical construction and is equipped with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve.

Fisher CAV III Micro-Flat trims are designed for cleaning, cavitation, and low flow applications with a maximum pressure drop of 241 bar (3500 psi). This product is a combination of two different products: cavitation control with Cavitrol III trims and Micro-Flat ...

F1 ELDVUEDVC6000 Series Digital Valve Controller (Fig. 1) and Actuator. The digital valve controller receives the valve stroke position in Figure 2) is a communicative, microprocessor-based conversion of electrical signals into feedback, as well as air supply pressure and pneumatic pressure of the actuator. This makes ...

Introduction: The Fisher/Fisher Vee-Ball™ V200 control valve has a hemispherical construction valve with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve, with a V-notch ball core and a spherical seal ...

Introduction: The Fisher/Fisher CV500 eccentric plug valve combines the adjustable rationtry of a cam, segmented V-notched ball valve with the inherent robustness of heavy-duty bearings, seals, and body. This combination provides a balance between corrosion protection and gas and liquid pressure control. 　　 ...

The Fisher®4200 Series Electronic Position Transmitter is a versatile, accurate instrument that combines field-proven electronic and mechanical technology to sense the position of the device and send a standard (4 to 20 mA) output signal to the indicating device. The available configurations of the 4200 are: transmitter only ...

Description: Fisher/Fisher TBX steam control valves reduce the pressure and temperature of steam to keep power plants running every day. In addition, it protects reheater tubes, condensers, and pipes from excessive pressure, temperature, and enthalpy excursions during steam turbine trips. 　　Products...

Application Flexibility—Actuators can be set either push-down open or push-down shut-off and can be installed anywhere in the four actuator/body mounting positions. Minimized dead zone—single joint connection plus splined pair clamp linkage reduces idling to low and improves control accuracy

Introduction: Fisher/Fisher NotchFlo™ DST control valves are designed for use in dirty, cavitation applications. The trims in this valve utilize a range of flow restrictions and extensions to eliminate cavitation, allowing particles up to 12.7 mm (1/2 in) in diameter to pass through without clogging. ...

The Fisher 2052's highly versatile features and compact actuator design assist with throttling or on/off applications. It can be installed on any valve, even when space is limited. specification Actuation mode: spring return, right-angle rotation, rotation Certified to PED, C ...

The Fisher M-Series Hand Turbine Actuator is a fully enclosed, all-weather turbine actuator that provides reliable manual operation for the Fisher A11, A31A, and A41 high-performance butterfly valves. The Fisher M Series Hand Turbine Actuator consists of a body shell, cover, turbine, ...