Fisher/Fisher Valves Series 167D Switching Valves

Description: The Fisher CSB700 Pressure Reducing Regulator Direct Acting Spring-Loaded Regulator is designed for a wide range of pressure reduction applications. The regulator offers a great deal of flexibility because it offers a variety of body sizes and end connections, outlet pressure settings, and ...

The Fisher D3 Control Valve is a compact, rugged valve for on/off or throttle control with FloPro technology and the choice of pneumatic or electric control. This valve is best used as a tipping valve for gas separators and scrubbers. At the same time ...

It can produce up to 5.3 kN (1,200 lbf) of thrust, depending on the construction. Depending on the size, travels up to 105 mm (4 1/8 inches) are available. The actuator base has four screw holes that allow for the installation of brackets or plates. With a wide selection of springs, it is suitable for almost any ...

The Model R622H regulator is certified by Underwriters Laboratories (UL), United States Safety Testing Laboratories, Inc., for use in LPG two-stage pressure regulating systems. The outlet pressure of the liquefied gas storage tank is reduced to 10 psig / 0.69 bar after being regulated by a pressure regulator. peculiarity Build...

The Fisher Model SR5 Regulator is a compact, high-flow, self-acting pressure reducer. It is designed for applications where hygienic design is extremely important, such as in the pharmaceutical, biotechnology or food and beverage industries. The unit is available in body sizes NPS 1/2 to 3 / DN 15 to 80 as well as ...

The Fisher CAV4 valve is designed for clean, cavitation applications with a pressure drop of more than 207 bar (3000 psi). The Cavitrol™ IV trim in the valve is designed to extend the flow area. Each trim stage has a sequentially increasing flow zone. This guarantees a very ...

Introduction: The Fisher/Fisher Vee-Ball™ V300 Flange Control Valve features a hemispherical valve with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve.

Description: The Fisher/Fisher Model S402Y Pressure Regulator Direct Acting Reed Regulator provides economical pressure reduction control in corrosive environments in a variety of residential and small commercial applications. Typically, the Model S402Y is used to reduce the pressure of gas distribution to 4.5 in w.c. to 2.5 ps ...

Fisher's 627 Series direct-acting pressure reducers are suitable for use in both low- and high-pressure systems. These regulators can be used with natural gas, air, or a variety of other gases. Performance characteristics vary according to the structure. peculiarity Internal pressure relief valve Model 627R and 627MR stroke limiters Discharge Operation Indicator ...

The Fisher 656 diaphragm actuator provides low- to medium-thrust actuation for stent-mounted applications. Such applications include the operation of butterfly valves and built-in turbine valves, louvers, dampers, and other similar equipment. specification Actuation mode: spring return, linear Certified PED, CUTR, ATEX Control...

The Fisher easy-e ET is the ideal solution for all high process temperature general applications, with a balanced plug design and cage guided trims. Available with straight-through or angled bodies, these valves provide up to Class V or Level VI shut-off specification Certified to SIL, fugitive emissions, N...

The EZR commander-action pressure reducing regulator runs accurately, smoothly and quietly, with tight shut-off and long service life, even in dirty conditions. The EZR series can be installed in a variety of applications such as natural gas transmission/distribution systems, industrial and commercial facilities. EZROSX ...

The Fisher Model 63EG Pilot-Operated Pressure Relief Valve can be used in both liquid and gas applications. The 63EG is also suitable for throttling back pressure or bypass applications. Both main valves use quick-change spool packs for quick maintenance. For remote monitoring, the Model 63EG valve can be used with position monitoring.

The Fisher 4660 pneumatic pilot-operated pressure controller activates a safe shutdown system for flowlines, production vessels, and compressors. The pilot is available in single or dual setpoint capability models that use a switching point to maintain full output pressure when the process pressure is within the set point range. If the process ...

The DMA/AF-HTC is functionally identical to the DMA/AF, but its construction is suitable for more demanding applications. The most common applications include interstage tempering of boilers, where desuperheaters are exposed to vibrations caused by high thermal cycling and pressure, high steam velocity, and flow. In addition to this specific application ...

The Fisher DVI desuperheater is injected with a water jet at the venturi outlet section to ensure thorough mixing as well as rapid atomization. DVI desuperheaters can be easily installed between flanges in steam pipes from DN25 to DN600 (1 to 24 inches). No moving parts, water fill mode for fast, ...

Fisher CAV III Micro-Flat trims are designed for cleaning, cavitation, and low flow applications with a maximum pressure drop of 241 bar (3500 psi). This product is a combination of two different products: cavitation control with Cavitrol III trims and Micro-Flat ...

The Fisher Model 585C actuator is typically equipped with a DVC6200 digital valve controller or a 360OP/P or I/P analog positioner. Can be used with a top-mounted or side-mounted manual handwheel (depending on the size of the actuator). Features: Produces up to 111 kN (25,000 lb ...

The cryogenic valve is a straight-through, single-port valve with stainless steel construction and welded extension bonnet. The EWT-C valve is designed to be pressure balanced. These cryogenic valves are designed to provide throttling or on-off control of liquids and gases at temperatures as low as -198°C (-325°F). According to...

Fisher Models 634 and 634M high-pressure shut-off valves provide overpressure protection through isolation. The Model 634 internal take-off shut-off valve can be installed between a pressure reducing regulator and downstream systems or equipment. The Model 634M external pressure take-off valve requires a control line and is installed upstream of the pressure reducing regulator. peculiarity ...