Fisher/Fisher D3 FloPro Control Valve

The Model 92C Self-Operated Valve is a cost-effective pressure reducer for use in steam applications. The valve can be equipped with a Model 6392 pilot or without a pilot for use as a pressure-loaded regulator. The commander-acting version uses the inlet pressure as the working medium; No need for a separate air ...

It can produce up to 5.3 kN (1,200 lbf) of thrust, depending on the construction. Depending on the size, travels up to 105 mm (4 1/8 inches) are available. The actuator base has four screw holes that allow for the installation of brackets or plates. With a wide selection of springs, it is suitable for almost any ...

The Fisher Model SR5 Regulator is a compact, high-flow, self-acting pressure reducer. It is designed for applications where hygienic design is extremely important, such as in the pharmaceutical, biotechnology or food and beverage industries. The unit is available in body sizes NPS 1/2 to 3 / DN 15 to 80 as well as ...

The Model 252 filter is designed to clean supply gas or air in a pilot, pneumatic instrument, or other device that requires clean gas to function properly when it is about to enter a pilot-acting regulator. This is an extended version of the filter with a larger drainage chamber that can hold more moisture and ...

Introduction: Fisher/Fisher A31A low-temperature, high-performance butterfly valves are designed for extreme temperature, cryogenic applications, with an extended body that keeps encapsulated systems and actuators away from extreme temperatures. The valve also features a metal NOVEX eal seal that provides tight shut-off, low operating torque and ...

The Fisher Model H120 direct-acting pressure relief valve comes with a pre-installed fixed spring retaining ring. The inlet pressure taker is mounted directly to the spring load lift assembly with a nitrile rubber (NBR) disc. When the inlet pressure exceeds the spring set value, the lifting assembly and disc assembly will be pushed ...

Introduction: The Fisher/Fisher CV500 eccentric plug valve combines the adjustable rationtry of a cam, segmented V-notched ball valve with the inherent robustness of heavy-duty bearings, seals, and body. This combination provides a balance between corrosion protection and gas and liquid pressure control. 　　 ...

The Fisher Model 63EG Pilot-Operated Pressure Relief Valve can be used in both liquid and gas applications. The 63EG is also suitable for throttling back pressure or bypass applications. Both main valves use quick-change spool packs for quick maintenance. For remote monitoring, the Model 63EG valve can be used with position monitoring.

Fisher's High Viscosity Polymer (HVP) series of control valves are widely used in the polymer industry. These processes often require valves to operate at sustained high temperatures to ensure the free flow of polymer fluids. The HVP valve provides a one-piece body with a heat transfer fluid pumped out, continuously providing ...

The Fisher 2052's highly versatile features and compact actuator design assist with throttling or on/off applications. It can be installed on any valve, even when space is limited. specification Actuation mode: spring return, right-angle rotation, rotation Certified to PED, C ...

The Fisher HP Series Control Valve is a single-port, high-pressure, globe or angle valve with a metal seat, cage guide, and push-down to shut-off plug action. These valves are designed for high-pressure applications in the process control industry, such as power generation, hydrocarbon production, chemical processing, and oil refining. ...

The 670 Series Panel Mount Regulator is a compact and rugged unit designed primarily for manually loaded pressure-balanced gas regulators to provide manual control of the diaphragm actuator control valve. peculiarity Control flexibility Easy fingertip control Easy to connect specification Maximum inlet pressure without shear ...

The Model 92S self-actuated control valve is piston-actuated and can be used in high circulation steam applications. The base of the Model 92S control valve and pilot has an abrasive surface that has been shown to minimize base leakage. Both the 6492H and 6492L commanders are equipped with bellows to reduce guide rod friction ...

The Series 912 direct-acting, spring-loaded regulators are United States Safety Testing Laboratories Corporation (UL) certified regulators for use in a variety of applications and industrial applications. The valve membrane of these regulators has some internal pressure relief to help minimize overpressure. peculiarity ...

Available in lead-free versions to comply with the Safe Drinking Water Act, cryogenic models can control cryogenic fluids, including liquid nitrogen (-320° F/-194° C), liquid argon (-303° F/-184° C), and liquid oxygen (-297° F/-181° C) for washing machines, boilers, and thermal applications.

Introduction: The Fisher/Fisher Vee-Ball™ V150S flanged control valve has a hemispherical construction and is equipped with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve.

　Introduction: The Fisher/Fisher Model R222H is a one-stage regulator that offers 65% higher flow and 40% smaller volume than standard compact regulators for use in underground tanks or airchambers where space is limited. Approved by Underwriters Laboratories (UL) (United States Safety Testing Laboratories Inc. ...

Fisher dirt service trims are designed for dirt and cavitation applications. Cavitation is eliminated with a range of flow limits and extensions, allowing particles up to 19mm (3/4in) in diameter to pass through without clogging. Each trim stage has a sequentially increasing flow ...

The Model 119 switching valve is used for on/off or throttling control of non-corrosive or slightly corrosive gases. They are designed to meet the requirements of low-pressure gas applications in a variety of industries. The 119EZ and 119EZS are used as fuel gas valves for oil and gas natural draft burners. The product comes with a built-in speed control ...

Fisher 3610J Pneumatic Single Acting Valve Positioner with ET Control Valve 667 657 Pneumatic Actuator Type: Pneumatic, single-acting valve positioner specification Regional classification: Group II Class 2 gases and dusts are ATEX compliant, and Group II/Class 2 equipment is CUTR compliant Authentication:...