Yaskawa inverter fault display Ou how to deal with the fault when running at high speed

It is an all-in-one controller with built-in power supply, CPU, communication and servo control. From simple positioning and interpolation to advanced multi-axis control, we are looking for cost-effective devices. Compatible with open networks Just install the optional module in the slot, which not only corresponds to the open network, but also ...

There are three main starting methods of three-phase asynchronous: direct start, traditional decompression start and soft start. Direct start, also called full pressure start. Decompression starting is to reduce the voltage on the stator winding during starting, and then restore the voltage to the rated after starting. Include...

1. If the fault code on the Yaskawa inverter is UV1, then it means that the low voltage of the main circuit is lower than the low voltage standard of 200V, at this time, we need to check whether there is a problem with the wiring of the power supply; 2. If the fault code appears on the Yaskawa inverter ...

Yaskawa H1000 inverter parameter model setting steps: Yaskawa H1000 hoisting using debugging steps (with PG ) No. Name Optimal value A 1-02 Control Mode Selection 3: With PG Vector Control A 1-03 Initialization 2220: 2 Wire Initialization A ...

1. First turn off the power - and pull down the power switch. 2. Secondly, use a pen to check the voltage feedback line of the cable behind the base of the robot to see if it is connected or loose. 3. Finally, confirm the abnormality for maintenance. Other error alarm codes can also be used according to the abnormal message under the welder...

1. Countermeasures to the overheating problem of inverter 1. For places where the operating environment temperature of the inverter is high, it is recommended to reduce the temperature of the inverter and strengthen cooling and ventilation; 2. Increase the frequency of regular maintenance of inverter fans, air ducts, etc., so as to improve the operating environment of the inverter, so that the inverter ...

1. It occurs when the power is turned on It's a servo unit fault 2. On servo on is happening It is an abnormal wiring of the motor (there is a connection problem or there may be a wrong wire, I encountered a wrong phase) 3. The encoder wiring is abnormal Servo unit failure 4. Re-enter the finger ...

Industrial robot is a multi-degree of freedom machine device, can automatically perform work, according to its own power and control ability to achieve various functions, by the mechanical part, sensing part, control part and other three parts, these three parts are divided into six subsystems, namely: 1. Drive...

First, the wiring of the main circuit 1. The power supply should be connected to the R, S, and T terminals at the input end of the inverter, and must not be connected to the output terminal (U, V, W) of the inverter, otherwise the inverter will be damaged. After wiring, the fragmented wires must be cleaned, and the fragmented wires may cause abnormalities. ...

1. Failure of mechanical system (1) The common fault phenomena and causes of mechanical systems are as follows 1. Due to poor lubrication or lubrication system failure, the rotating parts of the parts are seriously heated and worn or the shaft is held, resulting in the destruction of the parts of the rolling or sliding parts. 2 ...

When it comes to electric motors, many people feel that they are more ambiguous, in fact, with the beginning of the entire automobile industry to the new energy technology level, this year in China will produce an annual output of two million new energy vehicles of a great business scale, but although the current policy and development trend of the natural environment ...

1. OC1 and OC3 are faulty In many cases, the occurrence of OC (overcurrent fault) in Yaskawa inverter will be caused by the following reasons (now take A500 series inverter as an example): (1) Caused by improper parameter setting, such as time setting is too short; (2) Internal ...

Second, the wiring of the control circuit The control circuit of the inverter can be roughly divided into two types: analog and digital. 1. The wiring of the terminal of the control circuit should use shielded wire or twisted pair wire, and it must be separately routed from the main circuit and the strong current circuit (including the 200V relay program circuit). ...

1. Open the control panel of Yaskawa Servo and select Manual Mode. 2. Manually rotate the rotor of the motor to calibrate the position of the motor; 3. Press the start button on the panel to let the motor start to rotate; 4. Using the speed adjuster on the panel, adjust the motor ...

Yaskawa robot models are mainly as follows: Product 1, Yaskawa Robotics SEMISTAR-M, V series--MCL, MFL, MFS series MCL165 The MCL165 is suitable for handling large and heavy loads in clean rooms. The maximum load weight is 165KG, and the cleanliness reaches ISO6 level. ...

First, the working principle is different Stepper motor controller: It is an electronic product that can send out a uniform pulse signal, and the signal it sends out enters the stepper motor driver, which will be converted by the driver into a strong current signal required by the stepper motor to drive the stepper motor to run. Stepping ...

Yaskawa servo motor, also known as YASKAWA Yaskawa servo motor, is an automatic control system, which can control the position, orientation, status and other outputs of the target, and can change with the change of the target input value (or given value). It can be divided into AC servo motor and DC servo motor ...

(1) Determine the equipment in terms of working mode, volume and load type; (2) The equipment can be determined in terms of process, functional standards and control requirements; (3) The system is clarified in terms of I/O interface, communication interface, and assembly mode; (4) Summarize all ...

One. The type of failure and the reason for the failure 1. The type of failure Faults are divided into power supply faults, internal faults, and load faults. Power failure: There is a fault in the power grid connected by the inverter Internal fault: The failure of the drive itself Load Failure: ...

Precautions for installing Yaskawa inverter 　　Do not turn on the power supply during wiring operations, otherwise there will be a risk of electric shock. In order to prevent electric shock, please do not operate in the state of removing the inverter cover, otherwise there will be a risk of electric shock. Be sure to ground the ground terminal on the motor side ...