Fisher/Fisher D2, D2T FloPro High Pressure Straight-Through Control Valves

Create Date: 2024-8-30 12:03:23|Source: Fisher

  • Brand:
    Fisher
    Origin:
    United States
    Price:
    Please contact customer service
    Delivery time:
    Please contact customer service
    Model:
    D2, D2T FloPro High Pressure Straight-Through Control Valves
    Product Introduction
    The FloPro feature allows for easy setting of 0.25, 0.375, and 0.5-inch flow rates without the need for additional port sizes.
Product Description
1 NPT end connection
Fisher/Fisher D2, D2T FloPro High Pressure Straight-Through Control Valves
CL900 (2250 psig) pressure rating

FloPro field selectable flow rates for 1/4, 3/8, and 1/2" port sizes

Rugged alloy 6 trim for use in corrosive applications

Full 2250 psig pressure drop capability

Suitable for NACE applications

ENVIRO-SEAL D2 Packing System

Low temperature (-50°F) materials

Field reversible actuator

Lightweight (17 lbs.)

Corrosion-resistant painting

Field selectable flow rate—This FloPro feature allows for easy setting of 0.25, 0.375, and 0.5" flow rates without the need for additional port sizes.

Trim Options—Plug and seat are available in S17400 Double H1150 or rugged R30006 (Alloy 6) for corrosion applications.

ENVIRO-SEALTMD2 Packing System—The ENVIRO-SEAL D2 packing system improves stem sealing to prevent the leakage of valuable or hazardous process fluids or gases. It uses dynamic load packing, which reduces packing maintenance.

Suitable for NACE MR0175/ISO 15156 applications—Acid guard trims are standard construction on D2 FloPro control valves. Materials of construction meet the metallurgical requirements of NACE MR0175/ISO 15156. However, there may be corresponding environmental limitations.

CL900 Applications—Valve assemblies are designed and specified for ASME B16.34 CL900 applications.

Cryogenic Materials—Valve and actuator construction materials allow them to be used in cryogenic applications up to -46° C.

Field Reversible Actuator—The D2 FloPro actuator can be converted from air-open to air-off actuator operation in the field. (Conversion to air-closed actuator operation requires the removal of the four springs from the actuator housing configuration.) (Conversion to air-open actuator operation requires the addition of four springs to the actuator housing configuration.) )

Simple Installation—The compact design allows it to be installed in places where space is limited.

Ease of maintenance—screw-on bonnet/body connections require minimal tools for repair or maintenance

This article introduces Fisher/Fisher D2, D2T FloPro high-pressure straight-through control valve products, if you are interested in Fisher/Fisher pressure regulators, please also contact our customer service, we look forward to your call, hope our technology and service can bring you a better experience.

The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!

More on that
Fisher/Fisher Model 63EG-98HM Pilot-Acting Pressure Relief Valve or Back-Pressure Regulator Fisher/Fisher Model 63EG-98HM Pilot-Acting Pressure Relief Valve or Back-Pressure Regulator

The 63EG-98HM can be used in gas, liquid, or vapor applications. Suitable for applications up to 550°F / 288°C, Model 63EG-98HM utilizes high-temperature ethylene propylene diene diene monomer (EPDM) or perfluoroelastomer (FFKM) to provide Class VI shut-off. If used in corrosive conditions, the ...

Fisher/Fisher Type B Pressure Regulator Internal Pressure Fisher/Fisher Type B Pressure Regulator Internal Pressure

Introduction: Fisher/Fisher Type B Regulator Direct-acting, spring-loaded regulators provide economical pressure reduction control in a variety of residential, commercial, and industrial applications, as well as a wide range of vaporized fluids. This compact regulator can be installed on the ground level in a pressure reducing cabinet or ...

Fisher/Fisher 4195K Gauge Pressure Indicator Controller Fisher/Fisher 4195K Gauge Pressure Indicator Controller

The Fisher 4195K Gauge Pressure Indicator Controller displays process pressure and set point values on an easy-to-read process dial. These controllers compare the process pressure to the operator's adjusted set point and provide a pneumatic signal to the control element to change the process pressure toward the set point. ...

Fisher/Fisher TBX-T desuperheater Fisher/Fisher TBX-T desuperheater

The Fisher TBX-T desuperheater can be used in a variety of applications to effectively reduce the temperature of superheated steam to the ideal set point. The TBX-T can be installed in steam lines with diameters DN 200 to DN 1200 (NPS 8 to 48) and can maintain steam temperatures at 6°C (10° ...

Fisher/Fisher Bettis G Series Pneumatic Valve Actuators Fisher/Fisher Bettis G Series Pneumatic Valve Actuators

FisherBettis G Series Pneumatic Valve Actuators function Stable operation in harsh, harsh and insufficient power supply environments The modular design increases efficiency, reduces wear and tear, and extends service life Protected Tension-Lok™ Device Forward Locking Bullet ...

Fisher/Fisher HVP polymer flow control Fisher/Fisher HVP polymer flow control

Fisher's High Viscosity Polymer (HVP) series of control valves are widely used in the polymer industry. These processes often require valves to operate at sustained high temperatures to ensure the free flow of polymer fluids. The HVP valve provides a one-piece body with a heat transfer fluid pumped out, continuously providing ...

Fisher 3610JP Pneumatic Double Acting Valve Positioner Fisher 3610JP Pneumatic Double Acting Valve Positioner

The Fisher 3610JP pneumatic positioner can be used with a double-acting rotary actuator to locate control valves used in throttling applications. These positioners are rugged and provide valve positioning proportional to the pneumatic input signal or DC current input signal and as a whole ...

Fisher/Fisher Models 1808 and 1808A Pressure Relief Valves or Back Pressure Regulators Fisher/Fisher Models 1808 and 1808A Pressure Relief Valves or Back Pressure Regulators

Fisher's 1808 Spherical and 1808A Angle-Directed Back-Pressure Regulators or Relief Valves are economical and compact for use in gas or liquid applications to maintain pressure on oil-gas separators, or for pressure relief applications in gas distribution systems. peculiarity The design is simple and reliable Compact and lightweight Square...

Fisher/Fisher CAV III Micro-Flat trim Fisher/Fisher CAV III Micro-Flat trim

Fisher CAV III Micro-Flat trims are designed for cleaning, cavitation, and low flow applications with a maximum pressure drop of 241 bar (3500 psi). This product is a combination of two different products: cavitation control with Cavitrol III trims and Micro-Flat ...

Fisher/Fisher KTM Mecafrance Series RA Floating Ball Valve Fisher/Fisher KTM Mecafrance Series RA Floating Ball Valve

KTM Mecafrance Series RA three-piece ball valves with oscillating centre section designed for reliable use with easy seat and gasket replacement. The RA series is available with full and reduced boreholes, cast in carbon or stainless steel, and has an ISO top flange for easy automation. Feature: Swing center part ...

Fisher/Fisher Model 1098-EGR and 1098H-EGR Pressure Reducers Fisher/Fisher Model 1098-EGR and 1098H-EGR Pressure Reducers

Fisher's Model 1098-EGR and 1098H-EGR regulators provide economical and precise pressure control in a variety of applications, such as natural gas distribution systems; gaseous fuel supply for industrial boilers, furnaces, ovens and mixers; as well as large commercial/industrial establishments (e.g. shopping malls and schools).

Fisher/Fisher M Series Handwheel Turbine Actuators Fisher/Fisher M Series Handwheel Turbine Actuators

The Fisher M-Series Hand Turbine Actuator is a fully enclosed, all-weather turbine actuator that provides reliable manual operation for the Fisher A11, A31A, and A41 high-performance butterfly valves. The Fisher M Series Hand Turbine Actuator consists of a body shell, cover, turbine, ...

Fisher/Fisher 3610J Pneumatic Single Acting Valve Positioner Fisher/Fisher 3610J Pneumatic Single Acting Valve Positioner

Fisher 3610J Pneumatic Single Acting Valve Positioner with ET Control Valve 667 657 Pneumatic Actuator Type: Pneumatic, single-acting valve positioner specification Regional classification: Group II Class 2 gases and dusts are ATEX compliant, and Group II/Class 2 equipment is CUTR compliant Authentication:...

Fisher/Fisher S402Y Regulator Body size NPS3/4 1NPT Fisher/Fisher S402Y Regulator Body size NPS3/4 1NPT

Description: The Fisher/Fisher Model S402Y Pressure Regulator Direct Acting Reed Regulator provides economical pressure reduction control in corrosive environments in a variety of residential and small commercial applications. Typically, the Model S402Y is used to reduce the pressure of gas distribution to 4.5 in w.c. to 2.5 ps ...

Fisher/Fisher A31A Low Temperature High Performance Butterfly Valve Double D Drive Shaft Fisher/Fisher A31A Low Temperature High Performance Butterfly Valve Double D Drive Shaft

Introduction: Fisher/Fisher A31A low-temperature, high-performance butterfly valves are designed for extreme temperature, cryogenic applications, with an extended body that keeps encapsulated systems and actuators away from extreme temperatures. The valve also features a metal NOVEX eal seal that provides tight shut-off, low operating torque and ...

Fisher/Fisher Control-Disk™ Rotary Valve Flanged Version Fisher/Fisher Control-Disk™ Rotary Valve Flanged Version

Introduction: Fisher/Fisher Control-Disk™ rotary valves have excellent regulation performance. Compared to segmented ball valves, its equal percentage flow characteristics allow for a wider range of adjustments. This improved performance allows the valve to be controlled without process interference, allowing for better control of the target.

Fisher/Fisher Model 146 Severe Service Feed Valve Fisher/Fisher Model 146 Severe Service Feed Valve

Severe service valves for water applications in the power industry Feed Water Control Valve/Start Feed Water Regulator/Boiler Circulation Valve peculiarity Forged body Angular or Z-shaped Self-sealing lid Resistant to cavitation and flash evaporation Low noise The separation of sealing and control is realized Actuation: hydraulic, pneumatic, electric specification ...

Fisher/Fisher 8560 High Performance Butterfly Valve with Metsonyland Positioner SVI3 Fisher/Fisher 8560 High Performance Butterfly Valve with Metsonyland Positioner SVI3

Fisher Fisher Valve Instrument|The Fisher™ 8560 High Performance Butterfly Valve is equipped with Metsonyland positioner SVI3 A butterfly valve is a type of rotary valve that uses a rotating disc to control the flow of pipes. The disc is typically operable at 90 degrees and provides linear flow characteristics. For throttle control applications, one type of butterfly valve ...

Fisher/Fisher 656 Direct-Acting Diaphragm Actuator Fisher/Fisher 656 Direct-Acting Diaphragm Actuator

The Fisher 656 diaphragm actuator provides low- to medium-thrust actuation for stent-mounted applications. Such applications include the operation of butterfly valves and built-in turbine valves, louvers, dampers, and other similar equipment. specification Actuation mode: spring return, linear Certified PED, CUTR, ATEX Control...

Fisher/Fisher DVC6010 DVC6020 DVC6030 Valve Positioner Fisher/Fisher DVC6010 DVC6020 DVC6030 Valve Positioner

FIELDVUE™ DVC6200 AND DVC2000 DIGITAL VALVE CONTROLLERS ARE CERTIFIED FOR HART® COMMUNICATION INSTRUMENTATION FOR NON-FLAMMABLE, INTRINSICALLY SAFE, FIRE, AND EXPLOSION-PROOF APPLICATIONS. Digital valve controllers are available for single- or double-acting actuators. THE FIELDVUE DIGITAL VALVE CONTROLLER PROVIDES ...

CATEGORIES BYPASS
Customer Service Center

Online Consultation:QQ


ContactContact

Contact: Manager Huang

Contact QQ: 3271883383

Contact number: 13522565663


Scan the code to add WeChat (please save the picture first on the mobile phone)

working hoursworking hours

Weekdays: 9:00-17:00

Holidays: Only emergencies are handled

Contact us

Contact us

Contact number QQ consultation
QQ consultation

3271883383

Company address
Back to top