Fisher/Fisher Models 119, 119EZ, and 119EZS Changeover Valves

The Fisher 4660 pneumatic pilot-operated pressure controller activates a safe shutdown system for flowlines, production vessels, and compressors. The pilot is available in single or dual setpoint capability models that use a switching point to maintain full output pressure when the process pressure is within the set point range. If the process ...

The cryogenic valve is a straight-through, single-port valve with stainless steel construction and welded extension bonnet. The EWT-C valve is designed to be pressure balanced. These cryogenic valves are designed to provide throttling or on-off control of liquids and gases at temperatures as low as -198°C (-325°F). According to...

The Model 1290 Vapor Recovery Regulator is a self-contained commander-acting regulator system for vapor recovery of sealed gases. peculiarity Quick-change trim kits Easy to maintain online Trips can be monitored during use High precision The technology is mature specification Body size NPS 1 or 2 ...

The Fisher TBX-T desuperheater can be used in a variety of applications to effectively reduce the temperature of superheated steam to the ideal set point. The TBX-T can be installed in steam lines with diameters DN 200 to DN 1200 (NPS 8 to 48) and can maintain steam temperatures at 6°C (10° ...

The T205 series tank hermetic pressure regulator is a direct-acting spring pressure regulator. The T205 series can maintain a small positive pressure to prevent the vapors of the stored liquid from escaping into the atmosphere, reducing the risk of liquid combustion and preventing the product from being exposed to the air as much as possible.

The Fisher Whisper Trim I cage provides control of aerodynamic noise, especially in water, gas, or steam flow applications. The Whisper Trim I valve cage utilizes multiple specially shaped, dimensional, and spaced orifice to remove the noise generated by the water, gas, or steam flowing through the control valve.

The Fisher 3610J pneumatic positioner can be used with a single-acting rotary actuator to precisely locate control valves used in throttling applications. These positioners are rugged and provide valve positioning proportional to the pneumatic input signal or DC current input signal and as a whole ...

The Fisher 377 guard valve assists in maintaining routine process operations that require a specific valve or actuator. When the compressed air pressure drops below the trigger point, the guard valve prevents the actuator from rising, locking in the previous position, or not descending. When the compressed air pressure rises above the trigger point, 3 ...

Introduction: The Fisher/Fisher 8590 High Performance Butterfly Valve maintains tight shut-off and can be specified for a wide range of pressure and temperature conditions. The 8590 valve is available in a lug-style body design. The splined shaft can be connected to a variety of springs and valve membranes or pneumatic pilot actuators, and the square shaft or keyway shaft can be ...

Description: The Fisher CSB700 Pressure Reducing Regulator Direct Acting Spring-Loaded Regulator is designed for a wide range of pressure reduction applications. The regulator offers a great deal of flexibility because it offers a variety of body sizes and end connections, outlet pressure settings, and ...

Introduction: The Fisher/Fisher easy-e cryogenic valve is a single-port ball valve with stainless steel construction and welded extension bonnet. These cryogenic valves are designed to provide throttling or on-off control of liquids and gases at temperatures as low as -198°C (-325°F).

The Fisher ATST desuperheater is a state-of-the-art solution for desuperheating applications where atomization performance and amplitude of variation are critical. ATST nozzles atomize water through steam atomization to form tiny water droplets that evaporate rapidly over a wide range of vapor flows and conditions. specification Certificates: PED, CRN ...

Fisher's Model EZR Pilot Operated Pressure Relief Valve or Back Pressure Regulator is commonly used as an overpressure protection relief valve in city gate and district stations, or as a back pressure regulator in commercial and industrial applications. Its quiet and smooth operation, tight shut-off and long service life, even in dirty conditions...

Introduction: The Model 1805P-6358 Pressure Relief Valve is an accurate, low-cost commander-acting pressure relief valve consisting of a Model 1805P main valve and a Model 6358 commander. It is available in an NPS 2 size version with three ranges of 10 to 100 psig / 0.69 to 6.9 bar.

Fisher easy-e ES valves are the ideal solution for a wide range of applications, including sulfide and chloride stress cracking environments common in the oil and gas production industry. Available with ball or angle bodies, these valves provide up to Class V or Level VI shut-off. specification Certified in accordance with ...

The WhisperTube is a passive reactance silencer that is installed downstream of a control valve or other device that generates system noise. The pressure drop across the device has a negligible effect on the WhisperTube, so the system can be reduced in a wide range of operating conditions without impacting flow or process. Peculiarity...

Available in lead-free versions to comply with the Safe Drinking Water Act, cryogenic models can control cryogenic fluids, including liquid nitrogen (-320° F/-194° C), liquid argon (-303° F/-184° C), and liquid oxygen (-297° F/-181° C) for washing machines, boilers, and thermal applications.

The H200 Series Pop-Up Pressure Relief Valve is a direct-acting pressure relief valve with a pre-installed and fixed spring retaining ring. When the inlet gas pressure exceeds the spring set value, the lift assembly and disc assembly will be pushed away from the valve hole. The H200 Series Pop-Up Pressure Relief Valve is easy to operate and has a spring setting of ...

Fisher™ 8580 High Performance Butterfly Valve | The Fisher 8580 High Performance Butterfly Valve features enhanced shut-off with an eccentric mounting butterfly plate with soft or metal seals. This control valve provides an excellent throttling and switching performance experience. Authentication...

The 63EG-98HM can be used in gas, liquid, or vapor applications. Suitable for applications up to 550°F / 288°C, Model 63EG-98HM utilizes high-temperature ethylene propylene diene diene monomer (EPDM) or perfluoroelastomer (FFKM) to provide Class VI shut-off. If used in corrosive conditions, the ...