Fisher/Fisher H120 Series Pressure Relief Valves

The performance and simplicity of the Fisher FIELDVUE DVC2000 meter allows you to operate closer to the set point, improving product quality with more accurate control. WITH FIELDVUE PERFORMANCE DIAGNOSTICS, VALVE OPERATION WILL BE MONITORED ONLINE 24/7 TO ASSESS PERFORMANCE AND RELIABILITY.

Fisher's Model EZR Pilot Operated Pressure Relief Valve or Back Pressure Regulator is commonly used as an overpressure protection relief valve in city gate and district stations, or as a back pressure regulator in commercial and industrial applications. Its quiet and smooth operation, tight shut-off and long service life, even in dirty conditions...

The Fisher M-Series Hand Turbine Actuator is a fully enclosed, all-weather turbine actuator that provides reliable manual operation for the Fisher A11, A31A, and A41 high-performance butterfly valves. The Fisher M Series Hand Turbine Actuator consists of a body shell, cover, turbine, ...

The Fisher 656 diaphragm actuator provides low- to medium-thrust actuation for stent-mounted applications. Such applications include the operation of butterfly valves and built-in turbine valves, louvers, dampers, and other similar equipment. specification Actuation mode: spring return, linear Certified PED, CUTR, ATEX Control...

The Fisher DMA Desuperheater is a simple, mechanically atomized desuperheater with one or more nozzles with a fixed geometry for load-stabilized applications. The DMA is flanged to the side of the pipe in size DN 150 (NPS 6) or larger. specification Certified PED, CRN ...

The Fisher Model R622 direct-acting, spring-loaded regulator provides economical pressure reduction control in a variety of residential, commercial, and industrial applications. These regulators can be used for natural gas, manufactured gas, or LPG with the same inlet and outlet pressure capabilities. peculiarity Compact...

Simple installation—The one-piece body flange can be matched with many different types of pipe flanges to meet a variety of pipe requirements. Flanges help reduce exposed pipe flange bolting, shorten alignment and installation time, facilitate safety valve installation, and improve pipe tightness. Clamp valves in the pipeline ...

It can produce up to 5.3 kN (1,200 lbf) of thrust, depending on the construction. Depending on the size, travels up to 105 mm (4 1/8 inches) are available. The actuator base has four screw holes that allow for the installation of brackets or plates. With a wide selection of springs, it is suitable for almost any ...

N05500 nickel alloy Boton tubes are also available for applications where the controller must meet the NACE MR0175-2002N05500 standard. Repeatability conforms to the Outer Rim of the Continental Shelf (OCS) Order 5 for United States Bureau of Minerals test deviations and the standards defined in the United States Petroleum Organization (API) RP14C.

The Series 1805 pressure relief valve is ideal for farm faucet applications where a pressure relief valve is required between the primary and secondary regulators. The Series 1805 pressure relief valve is suitable for use with natural gas, air, propane, or any medium that is compatible with internal valve components. Relief ranges from 5 to 125 psig/0. ...

Introduction: The Fisher/Fisher 8532 High Performance Butterfly Valve provides excellent performance under extreme pressure and temperature conditions. The 8532 valve maintains tight shut-off and can be used in fire-tested buildings and can also be specifically designed for cryogenic applications. The valve is flangeless (to-clamp) ...

1 NPT end connection CL900 (2250 psig) pressure rating FloPro field selectable flow rates for 1/4, 3/8, and 1/2" port sizes Rugged alloy 6 trim for use in corrosive applications Full 2250 psig pressure drop capability Suitable for NACE ...

The Model 119 switching valve is used for on/off or throttling control of non-corrosive or slightly corrosive gases. They are designed to meet the requirements of low-pressure gas applications in a variety of industries. The 119EZ and 119EZS are used as fuel gas valves for oil and gas natural draft burners. The product comes with a built-in speed control ...

The Fisher Model 630 Big Joe™ Regulator is a direct-acting, spring-loaded decompression regulator with body sizes NPS 1 & 2 / DN 25 & 50 for a maximum inlet pressure of 1500 psi/103 bar and an outlet of 3-500 psi/0.21-34.5 bar ...

The Fisher Yarway AT-18/28 Heavy Duty A.T.-Temp Desuperheater was developed specifically for medium/high pressure steam applications. Its prefabricated structure can easily meet a variety of boiler specifications and material specifications. The unit can also be used as an injector for liquid injection gases, typically with high-grade alloys such as stainless steel. ...

Introduction: The Fisher/Fisher OSE quick shut-off valve quickly shuts off the airflow in the event of overpressure or loss of pressure. It is ideal for applications that require complete cut-off protection, precise sealing, fast response, high impact and shock resistant gases, top-mounted design, easy in-line maintenance, and savings.

The Model 1290 Vapor Recovery Regulator is a self-contained commander-acting regulator system for vapor recovery of sealed gases. peculiarity Quick-change trim kits Easy to maintain online Trips can be monitored during use High precision The technology is mature specification Body size NPS 1 or 2 ...

Fisher's Model 1098-EGR and 1098H-EGR regulators provide economical and precise pressure control in a variety of applications, such as natural gas distribution systems; gaseous fuel supply for industrial boilers, furnaces, ovens and mixers; as well as large commercial/industrial establishments (e.g. shopping malls and schools).

THE FIELDVUE DVC6200 DIGITAL VALVE CONTROLLER IS A HARTR COMMUNICATION INSTRUMENT USED TO CONVERT A TWO-WIRE 4-20 MA CONTROL SIGNAL INTO A BAROMETRIC OUTPUT FOR SUPPLY TO THE ACTUATOR. It can also be easily retrofitted to replace most Fisher and non-Fisher pneumatic actuators...

The H200 Series Pop-Up Pressure Relief Valve is a direct-acting pressure relief valve with a pre-installed and fixed spring retaining ring. When the inlet gas pressure exceeds the spring set value, the lift assembly and disc assembly will be pushed away from the valve hole. The H200 Series Pop-Up Pressure Relief Valve is easy to operate and has a spring setting of ...