Monthly inspection and maintenance of Korea Hyundai Heavy Industries Robot - Spot Welding Robot

The weld is not fully penetrated Incomplete weld penetration is one of the common defects in robotic welding. When this happens, the depth of the weld is not enough, which leads to a decrease in the strength of the weld. There can be a variety of reasons why a weld is not fully penetrated, such as insufficient heat input or incorrect welding parameters. ...

1. Failure of the operating system. That is, the soft fault of the automatic welding robot, often data loss or the operating system can not be started, the automatic welding robot has a protection function, can send an alarm signal to the fault source, only need to repair the fault according to the alarm reminder, in case the data ...

(1) Arc welding robot system optimization and integration technology: The arc welding robot adopts AC servo drive technology and high-precision, high-rigidity RV reducer and harmonic reducer, which has good low-speed stability and high-speed dynamic response, and can realize maintenance-free function. (2) Coordinated control ...

Workstations (Units) If the workpiece does not need to be dislocated during the entire welding process, the workpiece can be positioned on the table with a fixture, which is the simplest system. However, in actual production, more workpieces need to be dislocated during welding, so that the weld is in a better position.

1. Welding speed. Welding speed needs to match the welding quality, if the welding speed is too fast, it will affect the welding quality, easy to appear welding deviation, less welding, missing welding and other welding defects, the welding speed is too slow, it will affect the product production process, welding speed is an important indicator to determine the welding efficiency. ...

Under the wave of intelligent manufacturing in the development of science and technology, the production mode of replacing people with machines has gradually appeared in the production lines of major factories. At the same time, many factories are facing the problem of difficulty in recruiting workers and high labor costs, so the palletizer replaces manual work to accelerate and appear in major production enterprises in many directions.

1. The setting of the welding joint of the spot welding robot: The solder joints of the spot welding robot are carried out in the teach pendant, which has multiple functions in the teach pendant, and the solder joints can be set according to the specifications of the workpiece to be welded and the reasonable teaching sequence.

1. Mechanical production With the intensification of the welding task of the mechanical production operation, the welding operation has poor working conditions, the heat radiation is large, and it is a dangerous operation, and there are many large-scale equipment in the mechanical production, which also increases the difficulty of welding, and the welding robot ...

1. Robots 2. Automatic wire feeding device 3. Welding power supply 4. a welding gun 5. a positioner 6. Tooling fixtures

1. Carry out correct debugging. Before using the arc welding robot for welding work, it is necessary to debug the work, adjust the welding parameters according to the specifications of the weldment and the welding environment, observe whether the weld is well filled, and if there are welding defects, it needs to be checked and corrected in time.

Classification of handling robots: 1. Multi-joint robot: flexible action, small inertia of movement, strong versatility, can grasp the workpiece close to the machine base, and can bypass the obstacles between the body and the working machinery to work, with the needs of production, the flexibility of the multi-joint arm, the positioning accuracy ...

Hyundai Heavy Industries Group, Korea's largest shipping company, is stepping up efforts to diversify its business and take multiple measures to enhance its competitive advantage to overcome the "order shortage" faced by the shipbuilding industry affected by the new coronavirus epidemic. Appear...

1. MIG welding (MIG/MAG arc welding): This welding method uses the continuously fed welding wire and the burning arc between the workpiece as a heat source, and the gas sprayed by the torch nozzle protects the arc for welding. The inert gas is generally argon. 2. TIG welding (inert ...

1. Carry out fault analysis and train industrial robot maintenance workers to master fault analysis methods. 2. Closely combine the actual injection molding production and the condition characteristics of the injection molding machine, and divide the industrial robots in use into three categories: A, B and C to determine the focus of fault management. 3. Adopt monitoring instruments to ...

(1) Open modular control system architecture: using distributed CPU computer structure, divided into robot controller (RC), motion controller (MC), optoelectronic isolation I/O control board, sensor processing board and programming teaching box, etc. The Robot Controller (RC) and the programmed teaching pendant are connected via a string...

1. Please do not touch the live parts other than the secondary conductor. 2. The grounding of the welding machine should be implemented by the electrician in accordance with the regulations. 3. For installation and maintenance inspection, it is necessary to turn off the empty opening of the distribution box and cut off the power supply on all input sides for more than 5 minutes. After cutting off the power supply on the input side, the power ...

1. Ensure that the water and electricity are complete, and ensure that the alarm of the safety door and grating is lifted. 2. In the manual state of the robot, move the robot cursor to the alarm bar and press All to confirm that the welding enable is on (the blue button in the lower left corner of the teaching box screen is not crossed). ...

1. Improve the accessibility of welds. 2. It is particularly important to make the weld in the position of flat welding, especially when welding the weld of critical thickness. 3. When welding thin plates, the welding speed can be increased through displacement, and vertical welding can also be realized. 4. Machine ...

1. Point control mode (PTP) This control method only controls the pose of the industrial robot end-effector at certain discrete points in the workspace. In the control, the industrial robot only requires to be able to move quickly and accurately between adjacent points, and there is no trace of the target point.

1. Degrees of freedom The degrees of freedom can be explained by the number of axes of the robot, the more axes of the robot, the more degrees of freedom, the greater the flexibility of the movement of the mechanical structure, and the more versatile. However, the increase in degrees of freedom makes the structure of the robotic arm complex, which will reduce the rigidity of the robot. While...