Pilz will be exhibiting at LogiMAT 2023

Short-circuit method: when FD is displayed, it means that the safety loop is disconnected, at this time, the safety relay CC is disconnected, and the indicator light on the operation board is extinguished, first check whether the safety loop power supply fuse 1F1 (the 6th from the left in the lower row behind the control cabinet) is fused; Second, when the maintenance needs to be shorted, please ...

1. Replace small contactors: the contacts of the central relay have a certain ability to carry load, and when the load capacity is relatively small, it can be used to replace the use of small contactors, such as electric roller shutters and the control of some small household appliances. This not only serves the purpose of control, but also saves space, ...

1. Selection of relay coil application power supply Under normal circumstances, most of the relays of direct current are selected in the circuit design, and the types of power supplies used in relays can also be considered according to the characteristics of the control circuit. Secondly, it is necessary to think about the power consumed by the relay, and assume that the relay coil is supplied ...

On fully enclosed rail transit lines, viaducts or tunnels are usually used to avoid the impact of rail lines on the distance, while on non-fully enclosed rail transit lines, the plane intersection between the railway and the distance, that is, level crossings, is more common. In the early stage, rail transit ...

For the monitoring of safe protected areas under harsh conditions, such as dust, dirt, rain, light, sparks or shocks, the safety radar sensor PSENradar in combination with the configurable small controller PNOZmulti 2 offers the best solution: in addition to outdoor applications as well as woodworking and ...

On March 1, 2023, the National Printing Machinery Standardization Annual Conference and the First National Coating Machine Standardization Annual Conference were held in Yiwu, Zhejiang. The meeting was guided by the Standardization Administration of the People's Republic of China, the China Machinery Industry Federation, and the Yiwu Municipal People's Government.

Pilz's modular safety relay myPNOZ has received a lot of attention and acceptance since its introduction. It has been nominated for the Hermes Award, the Germany Innovation Award (GIA) and the Red Dot Design Award. This safety app, which can be customized and mass-produced according to user requirements, can be customized according to user requirements.

In the safe configurable small controller series PNOZmulti 2 from Pilz, a new stand-alone base module PNOZ m C0 is now available. PNOZ m C0 has the structural characteristics of a safety relay, but it is just as powerful as a safety controller. It offers 8 ...

With the progress of the industrial level and the improvement of people's safety awareness, more and more attention has been paid to the safe operation of equipment in the workshop. As a professional supplier of safe automation solutions, Pilz's safety products are used in a wide range of industries. Configurable safety control system PNOZmulti ...

With the rapid rise of new energy vehicles, the lithium battery industry has also ushered in explosive growth. The production process of lithium battery is more complex, and the production process of different battery types is also different, but the manufacturing process is roughly the same, which is the front process (pole piece production), the middle ...

Power supply: AC: Terminals A1 and A2 are connected to the power supply, and the ground wire is connected to the protective ground. DC: A2 is connected to the ground terminal of the power supply. Start-up loop: Auto-start: S13-S14 shorted. Manual monitoring start-up mode: S33-S34 ...

Recently, the "core shortage problem" has been plaguing major industrial control brand manufacturers, from safety PLCs and inverters, to safety door locks, etc., generally because of the lack of chips, resulting in longer delivery times, and some even unable to deliver the goods at all. This has created a "difficult problem" for the friends in the electrical design department.

1) Larger shape: The safety relay is different from the ordinary relay, and the safety relay is larger. 2) Modules instead of components: A safety relay is a module, not an electronic component like a normal relay. 3) Red and yellow: The safety relay has ...

As one of the core equipment of intelligent factory logistics, mobile handling robots play an important role in the factory logistics automation system. The AGV is equipped with an automatic guided vehicle, which can ensure that the system can be flexible and changeable along the ...

1. Presses = inflexible? In the past, presses were often labelled as "sluggish", "inflexible" and "high-risk". With the development of technology, safety solutions for presses are emerging one after another, and the safety of presses is greatly improved. In the event that security is ensured...

1. Contact failure (1) The phenomenon that cannot be disconnected due to mechanical occlusion of the contact (the needle-like protrusion and pit formed on the contact bite each other), fusion welding, or cold welding. (2) The contact wear of the relay is caused by the absence of arc extinguishing devices or measures, or improper parameter selection, ...

The most common ones are the following: (1) Contact failure 1. The phenomenon that cannot be disconnected due to mechanical occlusion of the contact (the needle-like protrusion formed on the contact and the pit biting each other), fusion welding, or cold welding. 2. Due to the contact resistance becoming large and unstable, the circuit cannot be normal ...

1. The fastener itself needs to be reliable and stable enough. 2. Need to rely on special tools to remove, such as hexagon screws, star screws, etc. Phillips/slotted screws are not recommended, as in some cases they can be easily fitted with fingernails or on the go.

Radar technology is ubiquitous in our lives, from the surveillance radar on the car to the safety radar on the industry, the purpose is to make the dangerous equipment have the ability to detect the surrounding moving objects, and effectively remind and brake when the moving objects are found to be approaching. The Pilz Safety Radar has been ...

Selection and features of Pilz safety relays: 1. Understand the necessary conditions first The power supply voltage of the control circuit, the maximum current that can be delivered; voltage and current in the controlled circuit; How many sets of contacts and what form of contacts are required for the controlled circuit. Choosing the following ...