Radar technology is ubiquitous in our lives, from the surveillance radar on the car to the safety radar on the industry, the purpose is to make the dangerous equipment have the ability to detect the surrounding moving objects, and effectively remind and brake when the moving objects are found to be approaching. Pilz safety radar has been widely used in the industrial field, can operate stably in harsh environments, and replace traditional safety optoelectronic protection equipment, such as outdoor large gantry crane equipment, mining equipment, raw meat processing plants, etc.
Now, Pilz has launched the second generation of the safety radar system, which has been optimized and added with more functions on the basis of the original characteristics. Let's find out now.
1. The protection area of the first generation of safety radar can only be set to narrow area (50°) and wide area (110°), and the detection area is fixed, which cannot be flexibly set for complex application environments; The second-generation safety radar can be adjusted by 10-100° of the protection area, and can be reasonably configured according to the actual environmental characteristics. The first-generation safety radar can only have 2 detection areas, and the front area cannot be adjusted, while the second-generation safety radar can independently set the range of 4 detection areas and give the status signal of the 4 detection areas.
2. In terms of optimization, the second generation of anti-motion monitoring can be set to select for X, Y, and Z directions, and the application of different process requirements is more flexible and humane, such as the equipment that always carries out horizontal or vertical movement, which can be dynamically applied through the settings, and can avoid moving to an unexpected position.
For the anti-occlusion monitoring, the distance setting is added, and the fixed obstruction in the monitoring area can be optimized according to the actual needs, so as to avoid choosing to turn off the overall function due to the inability of the installation position to avoid the occlusion.
3. The most important upgrade is the addition of PN communication function with Profisafe protocol, which makes the new safety radar system have more powerful communication capabilities, which can exchange data between radar sensors, radar control systems, and safety output signal status through the safe communication protocol and the main control system. The addition of this function reduces the complex wiring and enriches the collection information of the main control system, thus making the application and diagnosis more convenient.
For complex and harsh industrial environments, the safety radar system can ensure that on the basis of safety monitoring, it will not cause frequent shutdown due to external interference, so that the user's equipment can run more stably.
|
More on that
|
Pilz: Three levels of security validation, tailored to the user
Pilz's safety validation services for plants and machines can now be customised to suit your needs, choosing between three different validation levels. This guarantees an efficient service tailored to individual requirements, allowing plants and machines to be designed in accordance with standards and with maximum safety.
In the wind ...
|
|
How to match the user's drive circuit with the input characteristics of the solid state relay
Generally speaking, the input control voltage of the solid state relay is 3.2-32V. The control current is 5-30mA.Usually the SSR input circuit of 1-2 is not a constant current source circuit, and the input control voltage is 4-16V. The control current is 5-20mA, and the SSR input circuit with the larger rated current is connected to the constant current source ...
|
|
What should I pay attention to when using Pilz safety switches in series?
When using Pilz safety gate switches in series, the following points need to be noted:
1. The installation position of the switch must meet the design requirements of the safety gate control system to ensure that no accidents will occur during operation.
2. When connecting the circuit, it should be in accordance with the ...
|
|
Peel magnetic relay - the wiring method, function and application of time relay
Wiring method of time relay
1. Control wiring
You think of it as a DC relay. 3. 7 is used to connect to 12V control voltage; 2. 7 is used to connect to 24V control voltage. 7 of them are used as the negative electrode of direct current, which is connected to the neutral line when used. 2. Connect to a 220V live wire.
2 ...
|
|
Pilz launches the maintenance system "Key in Pocket"
The new maintenance system "key in pocket" from Pilz prevents the risk of unauthorised machine restarts and increases the safety of maintenance work. Digital maintenance assurance is based on the access authorization system PITreader, which ensures the safety of machinery and industrial information.
|
|
How Pilz safety relays are shorted to I10 points
Short-circuit method: when FD is displayed, it means that the safety loop is disconnected, at this time, the safety relay CC is disconnected, and the indicator light on the operation board is extinguished, first check whether the safety loop power supply fuse 1F1 (the 6th from the left in the lower row behind the control cabinet) is fused;
Second, when the maintenance needs to be shorted, please ...
|
|
Introduction to the appearance and terminal blocks of the Pilz safety relay PNOZ s5
PNOZ s5 belongs to the PNOZSigma family and is a safety relay with a time-delay function
There are 8 terminal blocks on the top and bottom of the module, where:
A1 and A2 are the terminal blocks of the module power supply;
S11 and S12 are terminal blocks for a set of safety input channels;
S21 and ...
|
|
Pilz - Presentation of the features of the safety relay PNOZ s60
In addition to the usual emergency stop monitoring, safety gate monitoring, light barrier monitoring and two-hand button monitoring, the safety relays of the PNOZsigma family are also functional, as well as safe speed monitoring, safe braking and braking monitoring. Voltage monitoring safety relays are also one of its features.
PNO ...
|
|
Pierre Servo Amplifier - Introduction to the advantages of servo amplifiers
Single-phase servo amplifier (referred to as amplifier), with a variety of quarter-turn, linear stroke, multi-turn single-phase electric actuator (electric actuator) matching, widely used in industrial automation control process in the automatic adjustment system, this amplifier is an improvement of the traditional amplifier, compared with the traditional ...
|
|
Peel magnetic relays - characteristics and principles of use of safety relays
The fundamental characteristics of safety relays:
Feature 1, can be used in some automatic control occasions: safety relay - a kind of equipment that can control safety, this equipment is very easy to use in the automatic control field. Generally, there are emergency stops or safety doors, as well as safety gratings and other input devices.
|
|
How do I remove the Pilz safety relay on the circuit board?
1. The mount can be quickly replaced.
2. For low-value and easy-to-purchase multi-leg assemblies, destructive removal methods can be employed to prevent board stepping on. For this type of relay, use pliers to break it off and then use a set with a semicircular or triangular file.
|
|
Pilz: Safe monitoring of cardboard feeds for packaging machines
Pilz supports manufacturers and operators of packaging machines in the implementation of packaging automation. As a well-known and trusted provider of machinery safety services to companies worldwide.
Use the myPNOZ modular safety relays
The first ...
|
|
Frequently asked questions about the myPNOZ safety relay of the new generation
Frequently asked questions about the myPNOZ safety relay generation are as follows:
What are the special features of myPNOZ?
Individually assembled in myPNOZ Creator and delivered as a turnkey system make safety relays unique. Of course, we should also ...
|
|
Pilz will be exhibiting at SPS Smart Production Solutions 2022
From 8 to 10 November 2022, at the SPS trade fair for intelligent production solutions in Nuremberg, Pilz will focus on automation solutions for safety and industrial security in plants and machinery under the theme "Safe and reliable".
Safe and cost-effective control ...
|
|
Pilz: Safety in the production of lithium-ion batteries
With the rapid rise of new energy vehicles, the lithium battery industry has also ushered in explosive growth. The production process of lithium battery is more complex, and the production process of different battery types is also different, but the manufacturing process is roughly the same, which is the front process (pole piece production), the middle ...
|
|
Pilz: The use of the safety functions of the servo controller
With the advancement and vigorous development of the concept of Industry 4.0, machinery and equipment are assisting or replacing personnel to complete the product production and processing process more efficiently and with high precision, and at the same time, the high-speed moving parts of machinery and equipment may cause different degrees of injury to operators. Countries around the world ...
|
|
Peel magnetic relay - how to adjust the voltage of high and low voltage relays?
1. Determine the voltage range that needs to be regulated: First of all, you must clarify the voltage range you need to regulate, as well as the specifications of the high and low voltage relays and the voltage range that can be adjusted. If there is no clear scope and specifications, you can check the relevant manuals of high and low voltage relays or consult the equipment manufacturer.
|
|
Pilz: New rope pull switch - Mini model is more economical
Whether on the assembly line or on the machine, the safety rope pull switch is a proven and reliable solution for triggering an emergency stop function from any point on the pull rope to shut down dangerous work processes. Pilz's rope pull switch PSENrope is available in rope lengths up to ...
|
|
Pilz: Visualisation solution based on PNOZmulti2
Visualization solution PASvisu with OPC UA interface
Pilz is expanding its web-based visualisation solution PASvisu: From the new version 1.3 onwards, the OPC UA interface can be connected to the small controller PNOZmulti and other control systems.
Use...
|
|
Peel magnetic relay – the difference between a transistor and a relay output PLC
1. The overload capacity of the transistor is less than the overload capacity of the relay
In general, in the case of a large inrush current (e.g., bulbs, inductive loads, etc.), the transistor overload capability is smaller, and more derating is required.
2. Under the condition of rated operation, the relay has the number of actions ...
|
|
Contact
working hours
