Introduction to the functions of various types of Sick sensors

Quality assurance through programmable imaging: RIBE Technik from Schwabach has developed an innovative bumper assembly system that includes an inspection system. Machine vision from SICK enables the identification of individual components and the monitoring of each operating process as a special system concept ...

SICK's new generation of RFID monitoring security locking device FLEXLOCK is officially launched. The FLEXLOCK safety locking device for RFID monitoring has an operating radius of 180° for greater flexibility and is also suitable for protective doors with smaller radii. LED lights can be selected from ...

(1) Automatic calibration: When the workpiece enters the sensitive area of the probe, hold down the "SET" button for 3 seconds, and the sensitivity value will be set and displayed in green. (2) Two-point calibration: When the workpiece does not enter the sensitive area, press and hold the "SET" button for three seconds.

Static characteristics of Sick sensors The static characteristics of the Sick sensor refer to the correlation between the output and the input of the Sick sensor for the static input signal. Since the input and output are not time-dependent, the relationship between them, i.e. the static ...

The logistics industry has always been a strong area of SICK, in response to the detection of various goods on different conveyor lines and the diverse needs of customers, SICK has launched a series of photoelectric sensors such as G6, Z18, W16, W26 and Ray26 - which can detect cartons, baskets, uneven appearance, transparent bottles, laminated bags, etc.

The 17th China International Industry Fair (IAS2015) was held in the National Convention and Exhibition Center (Shanghai) from November 3 to 7, 2015.

Two new members of the Ruler3000 family of Sick 3D vision products have been added, named Ruler3120 and Ruler3008. 　　The new 3D vision sensor solution Ruler3000 from SICK is suitable for a wide range of industrial applications and is characterized by its high speed and image quality. 3D Visual Transmission ...

The miniaturization, integration, and intelligence of sensors are the main trends of industrial development, and the increasing demand for small and integrated smart chips in industrial scenarios also provides better means for equipment integration and intelligence. Sick is also deeply aware of the small size of the large ...

Photoelectric sensors are controlled by converting changes in light intensity into changes in electrical signals. Photoelectric sensors are generally composed of three parts: light source, optical path and optoelectronic components. The measured change is converted into a change in the optical signal, and then the optoelectronic component is used to further ...

Dynamic features: The so-called dynamic characteristics of the sensor refer to the characteristics of the output of the sensor when the input changes. In practice, the dynamic characteristics of a sensor are often expressed in terms of its response to some standard input signal. This is because the sensor's response to a standard input signal ...

1. Wiring There are 4 outgoing wires of the sensor, among them, the red or brown wire is connected to the positive power supply, and the black wire is connected to the negative power supply; The green or blue wire is the dark output line, and the white or yellow wire is the bright output line, the user can choose one of them according to his needs, and the other is not used, but it should be insulated. The lines are not ...

Infrared sensors are sensors that use the physical properties of infrared rays to make measurements. Infrared, also known as infrared light, has the properties of reflection, refraction, scattering, interference, absorption, etc. Any substance that has a certain temperature above absolute zero can radiate infrared rays. ...

1. Measurement Sensors and sensor systems from SICK measure dimensions, profiles, volumes, distances, speeds, and filling levels to ensure smooth processes. 2. Detection SICK sensors can detect the presence and quality of various objects as well as the quality of consumer products to meet the needs of ...

(1) When the target to be measured is not perpendicular to the transducer of the sensor. This is because the target of the ultrasonic test must be within an angle of no more than 10° perpendicular to the sensor. (2) When a small beam diameter is required. Because the diameter of the general ultrasonic beam is ...

1. If the electronic ruler has been used for a long time, and the seal has been aged, and there are many impurities mixed with it, and the water mixture and oil will seriously affect the contact resistance of the brush, which will make the displayed numbers keep jumping. At this time, it can be said that the electronic ...

The detection procedure of the sensor 1. Symptom Judgment: Infer the location where the malfunction may occur. 2. Decoder detection: Confirm whether the suspected sensor has a fault code in the decoder, and strengthen the judgment in the data stream. 3. Inspection around the sensor: In case of ...

1. Set to "Surface" to measure the distance from the first surface within the sensor's detection range. This setting is available for all sensor heads. 2. Set to Glass Thickness to measure the distance from the front to the back of a transparent object, such as glass. This means that it has been measured with the sensing ...

1. Industrial sensors The SICK industrial sensor portfolio includes the widest range of photoelectric sensors, fiber optic amplifiers, color mark sensors, proximity sensors, magnetic cylinder sensors, and measuring light curtains in the automation sector, which are mainly used for: recording, counting, classifying, and positioning objects.

1. There are many types of displacement sensors, and the measurement accuracy, service life, response frequency and applicable occasions of sensor products designed with different principles will be slightly different. Appropriate displacement sensor products should be selected according to the on-site installation and measurement requirements. 2. The measurement range of the displacement sensor is one ...

1. Advantages (1) Germany SICK flow sensor can be used to measure industrial conductive liquids or slurries. (2) No pressure loss. (3) The measuring range is large, and the diameter of the electromagnetic flow transmitter is from 2.5mm to 2.6m. (4) Germany Sick SICK traffic transmission ...