Introduction to the product functions of Sick

1. Platinum thermal resistance The platinum metal is used as the temperature sensing element, and then together with the inner lead and the protective tube, the platinum thermal resistance temperature sensor is formed. It is also often connected to external measurement circuits, controls, and mechanisms to form a temperature sensor. This sensor has two main ...

Recently, Sick's 3D vision product Ruler series has been newly upgraded! The new products Ruler3002, Ruler3004 and Ruler3010 are officially available today! 　　01. Product characteristics • Contour point upgrade: up to 3200 Data points/Profile • Ultra-high scanning speed ...

Magnetostrictive technology and magnetostrictive encoders are increasingly used in linear motion measurement in various industrial equipment due to their wear-free, maintenance-free, and reliable absolute position detection. Condition-based diagnostics and predictive maintenance enable efficient production, where the intelligent functions of sensors are increasingly ...

Principle of ultrasonic distance sensor: Ultrasonic waves have a great ability to penetrate liquids and solids, especially in solids that are opaque to sunlight, and it can penetrate to a depth of tens of meters. Ultrasonic waves will produce significant reflections when they encounter impurities or interfaces, forming reflections into echoes, which can produce ...

(1) Measure the clock signal and data signal of the displacement sensor of 4 hydraulic cylinders, the clock signal is about 2.8V DC and 0.123V AC; The data signals are all about 2.8V DC and 0.245V AC. From this, it can be judged that the PLC clock and MTS data bit transmission and reception pulse loops are normal ...

1. When the load exceeds the action current, the circuit will be automatically cut off. 2. After the circuit is automatically cut off, the panel indicator light is on, which is convenient for judging the fault part. 3. After troubleshooting, press the red button at the bottom of the panel to restore the normal power supply. 4. For other reasons, the shell ...

1. Connect the device: connect the power supply and electrical signal to the sensor, connect the output interface to the PLC, connect RS232 to the computer, generally use RS232, but also change to other control methods, such as CAN, RS485 and so on. 2. Software installation: Open the laptop, install ...

With the obvious trend of population aging and the innovation and development of the medical and pharmaceutical industry, it can be expected that the demand for pharmaceutical products in China will continue to grow rapidly, and it is estimated that the industry scale will reach 2.15 trillion yuan by 2024. The huge market size also means more fierce market competition, plus ...

Main applications: Ultrasonic sensing technology is used in different aspects of production practice, and medical application is one of its most important applications. The application of ultrasound in medicine is mainly to diagnose diseases, and it has become a clinical...

Since its launch, the SICK ZS36x8 DPM has been well recognized by customers, hitting the pain points of customers for DPM code recognition, and has excellent results in demanding applications in electronics, lithium batteries, automobiles and other industries. 　　In order to better meet the needs of the domestic conventional market and meet the needs of logistics and factory automation.

1. At present, SICK pressure sensors can be used in combination with computers and instruments to improve operation and reduce errors. The human-machine dialogue function is the main feature of SICK pressure sensors, and the display device and input keyboard equipped with it become the medium for human-machine dialogue. 2. SICK pressure sensing ...

1. No weighing reading This kind of fault is generally more common, the weighing value of a certain scale is zero, regardless of whether there is something on the scale, its weighing value is always zero. There are several reasons for the above failure: a. the sensor is damaged, b. the line is open, c. the signal is ...

1. It is necessary to prevent the sensor from contacting corrosive gases, so as not to cause corrosion and affect the measurement results. 2. If the measurement is a high-temperature medium, the SICK sensor should see whether the temperature is within the suitable temperature range of the sensor.

Position monitoring of moving objects; Railway catenary survey, building limit survey; Measurement of objects that are not suitable for access; industrial automation and intelligent production management; Automobile speed and traffic statistics; Industrial monitoring signal trigger control; Tower crane ...

Infrared sensors are sensors that use the physical properties of infrared rays to make measurements. Infrared, also known as infrared light, has the properties of reflection, refraction, scattering, interference, absorption, etc. Any substance that has a certain temperature above absolute zero can radiate infrared rays. ...

1. The pressure goes up, the output of the transmitter does not go up to this situation, you should first check whether the pressure interface is leaking or blocked, if you admit that it is not, check the wiring method and check the power supply, if the power supply is normal, then simply pressurize to see if the output changes, maybe observe whether the zero position of the sensor has an output, if there is no ...

According to the measurement method, it can be divided into contact type and non-contact type 1。 The detection part of the contact: the contact temperature sensor is in good contact with the measured object, also known as the thermometer The thermometer achieves thermal equilibrium by conduction or convection, so that the indicated value of the thermometer can directly represent the ...

1. Self-regulation. At the beginning of use, please check whether the switch itself is in good condition, whether the appearance is in good condition, etc. 2. When avoiding obstructions. When the photoelectric switch is used, for some goods such as colored goods, goods with weak reflectivity, and goods with large gaps between small pieces...

Transmitter: An oscillator (usually ceramic, about 15 mm in diameter) vibrates to generate ultrasonic waves and radiate them into the air. Receiver: When the oscillator receives the ultrasonic wave, it generates the corresponding mechanical vibration according to the ultrasonic wave and converts it into electrical energy as the output of the receiver. ...

1. NTC RTD Sensor: Features: This kind of sensor is a negative temperature coefficient sensor, that is, the sensor resistance decreases with the increase of temperature; Application: NTC thermistors are commonly used as temperature measurement tools on the air side and medium side in automotive thermal management systems, such as evaporation.