Whenever you enter the working scale of the robot, it can cause serious damage. Only trained and certified personnel are required to enter the area. What should I pay attention to in the safe operation of industrial robots?
1. System security:
Because of the complexity and danger of the robot system, it is necessary to pay attention to the safety of the robot in practice. Whenever you enter the working scale of the robot, it can cause serious damage. Only trained and certified personnel are required to enter the area.
It is necessary to observe the following safety rules:
2. Waste disposal during on-site operations:
Hazardous solid waste generated by on-site service: waste industrial batteries, waste circuit boards, waste lubricating oil, waste grease, sticky oil return lines or rags, waste oil drums, and waste packaging materials for damaged parts in on-site operations:
• Damaged parts due to on-site service should be used by our on-site service personnel or customers after repair.
• Regarding disposable packaging materials, our field service personnel advocate for customers to hand them over to recycling companies for recycling.
• Field service: The service personnel at the site bring the waste industrial batteries and circuit boards from the field service back to the supplier, or the customer will exchange them for the purchase of new batteries.
• Waste lubricating oil, waste grease, waste oil drums, waste cotton yarn and rags, etc. Advocate that customers be collected separately and handed over to professional companies.
3. Safe operation of industrial robots:
• The safety fence is necessary to meet the requirements of being firm and fixed. If it is not possible to move, the operator should be prevented from easily breaking or removing the safety fence. At the same time, there must be no potentially dangerous parts in the sharp edges and corners of the safety fence itself.
• It is necessary to clearly show the current state of the robot (teach-in, operation and maintenance) on the outside of the safety fence. Prevent anyone from mismanipulating the robot and surrounding equipment, such as the human-machine interface, through the teach pendant.
• Please mark the danger zone on the ground, including the scale of movement of the robot and surrounding equipment. In addition, a satisfying safety space should be reserved around the area, and safety maintenance devices should be installed for operators to prevent abnormal operation or emergency.
4. Safety awareness and safety specifications for industrial robots:
Hazards are easy to identify, but the source of danger is often different within a particular robotic system. The number and type of hazards are directly related to the nature of the automation process and the complexity of the equipment. The hazards associated with hazards are related to the type of robot and its use and device. The form of programming, operation and maintenance has been changed. Because of the variability of dangers in the use of industrial robots, this specification provides a safety strategy for the planning and production of robots; Because the safety of the use of industrial robots is affected by the planning and use of specific robot systems, this specification also provides personal safety maintenance strategies in the process of robots and their system devices, function tests, programming, operation and maintenance.
Because the variability of hazards in the use of industrial robots is confirmed, it is necessary to provide safety assurance strategies for robot planning and production. Because the safety of the use of industrial robots is affected by the planning and use of specific robot systems, safety specifications should provide strategies for the personal safety maintenance in the device, function test, programming, operation and maintenance process of robots and their systems.
|
More on that
|
The Epson robot catheter is inserted into the O-type injection molding machine
In the water pipe production equipment - the water pipe is automatically pierced into an O-type injection machine, in the past, this operation was done manually, which is very dangerous, and it is very simple to get the worker's hand stuck in the machine, and the factory needs an automated solution to deal with this problem, so that the factory work is more and more safe.
...
|
|
Epson's unique robotics technology
Epson has a unique advantage in robotics skills. The first is a mature robot product. Epson's SCARA robot sales have achieved global market share for eight consecutive years***. In addition to this, there are high-performance robots that integrate AI skills, greatly simplifying the production industry ...
|
|
Epson robot loading inertia with Inertia settings
Loading Inertia and Inertia Settings Loading inertia (moment) is the quantity that indicates the rotational resistance of an object, which is indicated by the values of moment of inertia, inertia, GD2, etc. When installing the end of the clamp on the shaft and performing the operation, it is necessary to consider the loading inertia (torque) of the load.
...
|
|
The difference between the Epson robot stepper key and the EXE key
EXE. key description
Press the Epson robot's engine switch and button at the same time to perform the following operations. Execute the instructions in the form of TEACH Execute the program in the form of TEST
The step key is only available in the TEACH form.
Step...
|
|
The difference between the Epson robot stepper key and the EXE key
EXE. key depiction
Press the Epson robot's engine switch and button at the same time to perform the following operations. Execute the instructions in the form of TEACH Execute the program in the form of TEST
The step key is only available in the TEACH form.
Step key Depiction
...
|
|
The control method of the flexible robotic arm - Epson
1. Rigid treatment. The effect of elastic deformation of the structure on the motion of the rigid body of the structure is completely ignored. For example, in order to prevent excessive elastic deformation from damaging the stability and terminal positioning accuracy of the flexible robotic arm, NASA's remote-controlled spaceman has a maximum angular velocity of 0.5deg/s.
2. Feedforward ...
|
|
Epson robot operation mode
The Epson robot system has three forms of operation.
TEACH FORM: In this form, the teaching pendant is used to teach the point data and view it in the direction of the robot.
In this form, the robot operates at low power.
AUTO form This form can be used to ...
|
|
TIG welding automatic welding equipment maintenance
1. Check the power supply: First of all, you need to check the power supply of the argon arc welding machine to ensure that it is connected correctly and has a satisfactory voltage and current supply. If there is no problem with the power supply, it is necessary to check whether the power switch, fuse, and plug number parts are damaged or malfunctioning.
...
|
|
Epson appeared at the CIIE to provide "digital intelligence" solutions
On November 7, 2021, the third day of the 4th CIIE, the exhibition area was full of people coming and going. In the skills and equipment exhibition area, there were many visitors in front of the Epson booth at the CIIE for the second time this year.
|
|
Epson robot maintenance in three steps
(1) Check the heat dissipation of the Epson robot controller
1) Make sure that none of the following factors affect heat dissipation:
2) The controller is covered with plastic or other materials;
3) There is not enough room left behind and on the side of the controller ...
|
|
Epson robot teach-in point steps
(1) Select the point file to be taught in the drop-down menu on the point data page
(2) Select the number of the point to be taught in the lower right corner of the teaching page
(3) The position of the teaching point that needs to be moved by the micro-motion manipulator. In the case of SCARA manipulator, in the case of Motor 0n, it can be ...
|
|
Epson industrial robots pay attention to parameter selection
1. Number of robot axes. The number of axes of the robot affects the degree of freedom, if it is for a brief straight to go occasion, for example, a belt line from one side to the other, choose a simple four-axis robot; If the robot does not have much room to move, but the demand machine ...
|
|
Precautions when transporting palletizing robots - Epson robots
1. When using a crane or forklift to handle the robot palletizer, it must not be possible to manually support the robot palletizer control box;
2. Do not lie on the robot palletizer or stand under the lifted robot palletizer during handling;
...
|
|
Epson welding robot composition analysis
Welding robot is a modern and automated equipment that integrates computer, electronics, sensors, artificial intelligence and other aspects of knowledge. The welding robot is mainly composed of two parts: the robot body and the automatic welding equipment. The welding robot is easy to complete the stability and progress of welding products.
|
|
How Industrial Robots Are Classified by Use – Epson
An industrial robot is an automatic, position-controlled, programmable multi-functional manipulator that can handle a variety of materials, parts, things, and special devices with the help of corrective program operations to fulfill various tasks. Depending on its use, it is disposed of as ...
|
|
Epson pressure sensor features:
Epson pressure sensor main features:
The high rigidity and high sensitivity function complete the detection of fine forces and good response. The rugged and durable construction restricts the deformation of the sensor itself and prevents the sensor from being damaged in the middle of the sensor.
|
|
Problems in robot maintenance management - Epson robots
1. Heavy use and light maintenance because of the arduousness and complexity of robot repair operations, some units lack awareness of the importance of robot handling and maintenance, ignore the necessary maintenance operations of robots, and seek short-term benefits in the process of robot application, making the machine ...
|
|
Functional configuration of the robot tool changer
1. Robot hand grasping module (manipulator)
The robot hand grasping module is one of the common robot things, which is mainly used to hold up various items and inherit power. The quick-change skill of the robot hand grasping module is to transform the interface between the robot hand grasping module and the robot body.
|
|
Epson Robot CPU/DPB board replacement
(1) Enclosed robots.
(2) Remove the adapter plate.
(3) Remove the following parts that are connected to the adapter plate (inside). Air Hose TP Adapter
(4) Remove the CPU/DPB board device screws. Allen button ...
|
|
Features of Epson's seven-axis industrial robots
The seven axes of the seven-axis industrial robot are: base rotation axis, vertical arm lifting axis, horizontal arm telescopic axis, rotating wrist axis, elbow bending and extension axis, wrist rotation axis, and hand and claw opening and closing axis
The characteristics of the seven-axis industrial robot such as ...
|
|
Contact
working hours
