1. Strong applicability: when the size, volume, shape and the external dimensions of the tray of the products produced by the enterprise change, only a slight modification can be made on the touch screen, which will not affect the normal production of the enterprise. The traditional mechanical palletizer is quite troublesome or even impossible to change.
2. High reliability: The repeated operation of the packaging robot can always maintain the same state, and there will be no subjective disturbance of similar people, so the reliability of its operation is relatively high.
3. High degree of automation: The operation of the packaging robot relies on program control, without manual participation, with a high degree of automation, saving a lot of labor.
4. Good accuracy: The operation control of the packaging robot is accurate, and its azimuth error is basically below the millimeter level, and the accuracy is very good.
5. Low energy consumption: the power of the general mechanical palletizer is about 26KW, while the power of the packaging robot is about 5KW, which greatly reduces the operating cost of customers.
6. Wide range of application: The packaging robot has a wide range of uses, and it can complete a number of operations such as grabbing, transferring, loading and unloading, and stacking.
7. High efficiency: the working speed of the packaging robot is relatively fast, and there is no continuous time, so its work efficiency is relatively high.
8. Less floor space: The packaging robot can be set up in a narrow space, which can be effectively used, which is conducive to the placement of the production line in the customer's plant and can set aside a large warehouse area.
Packaging robots improve the efficiency of production for enterprises, improve the quality of enterprise products, reduce the amount of workers and labor, and ultimately improve the efficiency of enterprises, which is why enterprises choose packaging robots to replace traditional production lines.
|
More on that
|
OTC welding robot relay device + I/O board
1. Cut off the main power supply and circuit breaker on the control equipment.
2. Remove the back panel on the side of the control device.
3. Please perforate the panel and run through the signal line and cable.
4. Connect the I/O wires to the relay device ...
|
|
OTC welding robot usage tips
The development of welding robot skills has quickly experienced three stages: reproducible, perceptible, and intelligent. The reason why welding robots are so popular is mainly because of its strengths, such as: spatter, smoke and dazzling light generated during the welding process, which are very useful to manual workers.
|
|
Precautions for the safety production of OTC welding robots
One of the great benefits of welding robots is that they can replace humans in dangerous or harmful environments, preventing injury. Don't think that this is a peace of mind, because at the same time there is another potential risk, which is the occurrence of robot injury accidents. To this end, ...
|
|
The technical advantages of OTC robots in the field of welding
OTC robots have certain advantages in all kinds of welding fields, and can complete all kinds of welding operations for users, which is a very good feedback and reputation for OTC robots. However, for users who do not know about OTC robots, they often may not know that OTC robots are used in various fields.
|
|
The main input and output interface of the robot - Odichi robot
(1) I/O port
I/O input and inlet, including welding start, stop, reset, welding method selection, welding car and welding torch adjustment and other 16 switching inputs, plus pendulum photoelectric sensor switching input, sharing 17 I/O input points.
I/O outputs, 3 ...
|
|
The type of control of the robot - OTC robot
1. The type of robot control can be divided into open-loop control and closed-loop control according to whether there is a reaction or not, during which open-loop control is generally considered to be more accurate, but the requirements are more chaotic. Generally speaking, if we want to achieve open-loop accurate manipulation, we need to know the accurate model of the controlled object ...
|
|
Basic Composition and Classification of Industrial Robots - OTC Odihi
Industrial robots are multi-articulation manipulators or multi-free robots in the industrial field. An important development of the future manufacturing industry is that industrial robots have now replaced the entire production, which is the foundation for the completion of intelligent production, and will ensure the completion of industrial automation, digitalization and intelligence in the future. Produce...
|
|
Three-axis cantilever linear module robotic arm installation - OTC Odichi
Step 1: Attach the X-axis to the device table
The machining accuracy of the device table will affect the positioning accuracy and stability function of the robotic arm, and the flatness of the device table should be less than 0.05mm/500mm.
Step 2: Install the XY axis adapter
When installing the XY axis adapter plate, please use a single ...
|
|
Precautions for OTC robot aluminum alloy welding
1. Aluminum is very easy to oxidize in air and during welding, and the alumina (Al2O3) generated has a high melting point, is very stable, and is not easy to remove. Prevent the melting and fusion of the base metal, the ratio of oxide film is serious, it is not easy to surface the surface, and it is easy to generate slag inclusions, non-fusion, non-welding penetration and other deficiencies. Oxidation of the surface of aluminum...
|
|
OTC welding robot selection welding wire requirements
The robot can be supplied with barrel or disc wire as required. In order to reduce the frequency of replacing the welding wire, the robot should use barreled welding wire, but due to the selection of barreled welding wire, the wire feeding hose is very long, the resistance is large, and the quality requirements such as the stiffness of the welding wire are high.
...
|
|
How to increase the service life of OTC robotic arms
1. The arrangement and arrangement of the parking airport should ensure that the entry and exit of any manipulator is not affected by other manipulators.
2. It should be parked in a dry room. Those who have the necessary need to park outside should pick a flat ground and lay it with planks. After parking, cover with a covercloth.
3. In ...
|
|
OTC robots are mainly used in the field
Nowadays, tasks that are too dirty, too tiring, too risky, too precise, too heavy, or too repetitive and boring for humans are often done by robots. Many industrial robots are used in the production line of the factory engaged in the manufacturing industry, and other application areas include: injection molding industry, construction industry, stone ...
|
|
HOME and transition point teach-in – OTC robots
In the window, click "robotkr210r2700_extra", and then in the menu, under the "Commands" menu, click the command button RobotJog, which guides the manual operation panel to open and move the robot to the appropriate position.
...
|
|
Problem Analysis of Welding Robot - Oudixi Robot
1. Why do I need to adjust the parameters at any time when welding stainless steel?
When welding stainless steel, the primary reason why welders can adjust the welding parameters (voltage, current, arc length, induction coefficient, pulse width, etc.) at any time is the mismatched composition of the welding consumables.
Chemical composition is important, and the batch...
|
|
OTC welding robot selection welding wire requirements
The robot can be supplied with barrel or disc wire as required. In order to reduce the frequency of replacing the welding wire, the robot should use barreled welding wire, but due to the selection of barreled welding wire, the wire feeding hose is very long, the resistance is large, and the quality requirements such as the stiffness of the welding wire are high.
...
|
|
The Meaning of Industrial Robots - OTC Odichi
Industrial robots are general-purpose programmable machines with solid anthropomorphic properties. Robotic arms are a common feature of industrial robots and can be used to perform a variety of industrial missions. In addition, industrial robots have automated systems, the ability to make decisions, communicate with other machines, and respond to ...
|
|
Analysis of the maintenance content of the ODI robot
The maintenance content of the robot is mainly to replace the smooth oil of the six shaft reducers and the smooth oil of the J4 shaft gear shaft, the replacement of wearing parts, the operation status of each module in the control cabinet, and the wear and tear of each cable in the control cabinet.
If the grease is not replaced for a long time, the six axes of the robot will be formed.
|
|
The relationship between ODS servos and robots
The servo motor is the driving device of the robot joint
The joint drive of the robot is inseparable from the servo system, and the more joints, the higher the flexibility and accuracy of the robot, and the more servo motors need to be used. The servo motor affects the robot's arm control, such as orientation, angle, etc.
|
|
Industrial robots beware of low-end - Oudixi
In recent years, China's industrial robot industry has entered a period of rapid growth, and has become the world's largest shopping mall for six consecutive years. In the development of industrial robots, there was a hot together, the concept of hype that existed at that time, rushed ...
|
|
Advantages of OTC robot synchronous feeding welding system
The primary advantages of the OTC robot synchronous feeding welding system:
1. The OTC robot synchronous feeding welding system has the ability to complete the ultra-high-speed control wire feeding, and the welding ability of the OTC Welbee welding used is also directly ...
|
|
Contact
working hours
