|
Fisher/Fisher 8580 High Performance Butterfly Valve
Fisher™ 8580 High Performance Butterfly Valve |
The Fisher 8580 High Performance Butterfly Valve features enhanced shut-off with an eccentric mounting butterfly plate with soft or metal seals. This control valve provides an excellent throttling and switching performance experience.
Authentication...
|
|
Fisher/Fisher CAV4 valves
The Fisher CAV4 valve is designed for clean, cavitation applications with a pressure drop of more than 207 bar (3000 psi). The Cavitrol™ IV trim in the valve is designed to extend the flow area. Each trim stage has a sequentially increasing flow zone. This guarantees a very ...
|
|
Fisher/Fisher Vee-Ball™ V300 Flanged Control Valve NACE compliant
Introduction: The Fisher/Fisher Vee-Ball™ V300 Flange Control Valve features a hemispherical valve with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve.
|
|
Fisher/Fisher 3610J Pneumatic, Single-Acting Positioner
The Fisher 3610J pneumatic positioner can be used with a single-acting rotary actuator to precisely locate control valves used in throttling applications. These positioners are rugged and provide valve positioning proportional to the pneumatic input signal or DC current input signal and as a whole ...
|
|
Fisher/Fisher 4660 Pneumatic High and Low Pressure Conductor
The Fisher 4660 pneumatic pilot-operated pressure controller activates a safe shutdown system for flowlines, production vessels, and compressors. The pilot is available in single or dual setpoint capability models that use a switching point to maintain full output pressure when the process pressure is within the set point range. If the process ...
|
|
Fisher/Fisher Model EZR Pressure Relief Valve or Back Pressure Regulator
Fisher's Model EZR Pilot Operated Pressure Relief Valve or Back Pressure Regulator is commonly used as an overpressure protection relief valve in city gate and district stations, or as a back pressure regulator in commercial and industrial applications. Its quiet and smooth operation, tight shut-off and long service life, even in dirty conditions...
|
|
Fisher/Fisher Valve 2100 Level Switch
The Fisher 2100 Switch-Type Pneumatic Switch and 2100E Electric Switch sense high and low levels. Typically, these switches pneumatically or electrically control the safety shut-off system of on-site processing equipment in oil and gas production applications. The 2100 and 2100E switches use float float sensors ...
|
|
Fisher/Fisher Series 1805 Series Back Pressure Regulators and Relief Valves
The Series 1805 pressure relief valve is ideal for farm faucet applications where a pressure relief valve is required between the primary and secondary regulators. The Series 1805 pressure relief valve is suitable for use with natural gas, air, propane, or any medium that is compatible with internal valve components. Relief ranges from 5 to 125 psig/0. ...
|
|
Fisher/Fisher Model 630 Regulator
The Fisher Model 630 Big Joe™ Regulator is a direct-acting, spring-loaded decompression regulator with body sizes NPS 1 & 2 / DN 25 & 50 for a maximum inlet pressure of 1500 psi/103 bar and an outlet of 3-500 psi/0.21-34.5 bar ...
|
|
Fisher/Fisher 3620JP Electrical Double Acting Positioner
The Fisher 3620JP Electrical Double Acting Positioner can be used with rotary actuators and locate control valves used in throttling applications. The positioner is mounted to the actuator housing. The positioner is rugged and provides valve positioning proportional to the DC current input signal. Fee...
|
|
Fisher/Fisher EZ ET Pneumatic Control Valve is supplied with DVC6200 DVC2000 valve positioner
The cryogenic valve is a straight-through, single-port valve with stainless steel construction and welded extension bonnet. The EWT-C valve is designed to be pressure balanced. These cryogenic valves are designed to provide throttling or on-off control of liquids and gases at temperatures as low as -198°C (-325°F). According to...
|
|
Fisher/Fisher DVC6010 DVC6020 DVC6030 Valve Positioner
FIELDVUE™ DVC6200 AND DVC2000 DIGITAL VALVE CONTROLLERS ARE CERTIFIED FOR HART® COMMUNICATION INSTRUMENTATION FOR NON-FLAMMABLE, INTRINSICALLY SAFE, FIRE, AND EXPLOSION-PROOF APPLICATIONS. Digital valve controllers are available for single- or double-acting actuators. THE FIELDVUE DIGITAL VALVE CONTROLLER PROVIDES ...
|
|
Fisher/Fisher M Series Handwheel Turbine Actuators
The Fisher M-Series Hand Turbine Actuator is a fully enclosed, all-weather turbine actuator that provides reliable manual operation for the Fisher A11, A31A, and A41 high-performance butterfly valves.
The Fisher M Series Hand Turbine Actuator consists of a body shell, cover, turbine, ...
|
|
Fisher/Fisher position transmitters 4210, 4211, 4212
The Fisher®4200 Series Electronic Position Transmitter is a versatile, accurate instrument that combines field-proven electronic and mechanical technology to sense the position of the device and send a standard (4 to 20 mA) output signal to the indicating device. The available configurations of the 4200 are: transmitter only ...
|
|
Fisher/Fisher V200U Rotary Control Valve
The V200U is designed to be flangeless and offers many of the benefits of the V150, V200 and V300 B Series Vee-Ball proven valves, plus a smaller, more compact face-to-face design. The waveform segmented V-groove ball keeps work smooth, clog-free, and the ball and durable HD ...
|
|
Fisher/Fisher Series 912 Pressure Reducing Regulator - LPG
The Series 912 direct-acting, spring-loaded regulators are United States Safety Testing Laboratories Corporation (UL) certified regulators for use in a variety of applications and industrial applications. The valve membrane of these regulators has some internal pressure relief to help minimize overpressure.
peculiarity
...
|
|
Fisher/Fisher Cavitrol™ III trims
Fisher Cavitrol III trims are designed for clean, cavitation applications with a maximum pressure drop of 207 bar (3000 psi). The cage in the trim includes a large number of specially shaped, radially arranged holes to reduce turbulence and maintain the overall pressure drop, thereby controlling or eliminating cavitation.
|
|
Fisher/Fisher GX Control Valve Valve size standard NPS
Introduction: Fisher/Fisher GX control valve and actuator systems are designed with state-of-the-art technology in a small form factor for a wide range of process gases, vapors, and fluids, and are rugged, reliable, and user-friendly. It does not need to adjust the size of the actuator, once the valve ...
|
|
Fisher/Fisher Whisper Trim I Valve Cage™
The Fisher Whisper Trim I cage provides control of aerodynamic noise, especially in water, gas, or steam flow applications. The Whisper Trim I valve cage utilizes multiple specially shaped, dimensional, and spaced orifice to remove the noise generated by the water, gas, or steam flowing through the control valve.
|
|
Fisher/Fisher Model 179 High Pressure Drain Valve
It is suitable for steam turbine drainage and steam exhaust applications.
peculiarity
Forged body.
Bonnet/body integrated design.
Tungsten-chromium-cobalt alloy Stellite seat.
Pilot valve plate.
Dustproof casing on the upper part of the actuator.
Easy conversion to actuators.
Valve position indicator is available
Small driving force. ...
|