The basic functions of the robot control system - Odichi

The maintenance content of the robot is mainly to replace the lubricating oil of the six shaft reducers and the lubricating oil of the J4 shaft gear shaft, the replacement of wearing parts, the operation of each module in the control cabinet, and the wear of each cable in the control cabinet. Long time without ...

　　(1) Regular inspection In order to use the welding machine safely and effectively, please pay attention to regular maintenance and inspection. Everyday precautions. (1) Is there any abnormal vibration, noise, or burnt smell? (2) Cable ...

Robot protective clothing is used to protect the robot from the external environment during operation, protect against chemical dangerous goods, corrosive substances and other extended life of the robot. 1. Background of the use of OTC robot protective clothing Appear...

Industrial robots are multi-articulation manipulators or multi-free robots in the industrial field. An important development of the future manufacturing industry is that industrial robots have now replaced the entire production, which is the foundation for the completion of intelligent production, and will ensure the completion of industrial automation, digitalization and intelligence in the future. Produce...

Now the speed of social science and technology development is very fast, it can be said that it is not an exaggeration to change with each passing day, the workshop that was crowded with people in the past is now almost gone, especially in some traditional industries such as welding workshops. But with O...

The robot can be supplied with barrel or disc wire as required. In order to reduce the frequency of replacing the welding wire, the robot should use barreled welding wire, but due to the selection of barreled welding wire, the wire feeding hose is very long, the resistance is large, and the quality requirements such as the stiffness of the welding wire are high. ...

OTC seven-axis industrial robot Japan's DAIHEN Group Odihi has launched the latest seven-axis robots (FD-B4S, FD-B4LS, FD-V6S, FD-V6LS, FD-V20S). Thanks to the rotation of the seventh axis, they are able to complete tasks like ...

1. Number of joints. The number of joints can also be referred to as degrees of freedom, which is an important indicator of the robot's flexibility. Generally speaking, the robot workspace can reach three degrees of freedom, but welding not only needs to reach a certain orientation in the space, but also needs to ensure the spatial posture of the welding gun. ...

1. Find the operation origin of the OTC welding robot: click "Program" on the setting box, enter 9999, press "Confirm", press "Look Forward", and the yellow displayed on the setting box is the current process. 2. Create an empty ...

Like Panasonic, OTC robots are also focused on welding, which is related to their beginnings in the welding industry. Japan OTC Co., Ltd. is active in the policy of "making it easier for users to operate and achieve higher precision welding".

When the second-hand manipulator is stored for a long time, it is necessary to pay attention to the following seven requirements: 1. The arrangement and placement of the parking airport should ensure that the entry and exit of any manipulator is not affected by other manipulators. 2. It should be parked indoors in a boring room. Those who have to park outdoors should choose a flat ...

According to different grasping methods and application environments, the robot end gripper can be designed into a variety of structural methods, and the following lists several common structural methods: 1. Mechanical gripper The mechanical gripper is a very basic ...

(1) Open and modular control architecture The distributed CPU computer structure is selected, which is divided into robot controller (RC), motion controller (MC), optoelectronic isolation I/O control board, sensor processing board and programming teaching box. Robot Controller (RC) & Programming ...

1. The weld bead and welding trajectory cannot be corrected First of all, in teach-in mode, the empty walk procedure ensures that the welding orientation is correct. Secondly, consider that there is a problem when soldering*** is searching. At this time, it is necessary to consider the way the welding robot finds the weld bead (arc or laser) to set it.

1. Cut off the main power supply and circuit breaker on the control equipment. 2. Remove the back panel on the side of the control device. 3. Please perforate the panel and run through the signal line and cable. 4. Connect the I/O wires to the relay device ...

The hardware of the microcomputer control system of a welding robot is mainly composed of the interface circuit of the S7-200 PLC microcomputer controller and the sensors and motors. The S7-200 controller module includes: CPU module, I/O module, and D/A module, and the CPU module can complete the messy real-time control function ...

1. The welding fixture of the OTC welding robot has the characteristics of agile action and convenient operation. The operation orientation should be located in a position that is easily accessible and accessible to workers. When the robotic welding fixture is in a clamping condition, it should be able to self-lock. ...

With the accumulation of OTC robot technology and the advantages of automation, OTC can create an automated work system for customers from bolt picking to bolt locking agent application and tightening screws using robots. This...

This article first introduces the OTC robot repair case - the calibration method and process of the teach pendant touch screen (W-L02140). When we use the OTC robot teach pendant, we adjust the touch screen light spot and the process of screen echoing.

Nowadays, tasks that are too dirty, too tiring, too risky, too precise, too heavy, or too repetitive and boring for humans are often done by robots. Many industrial robots are used in the production line of the factory engaged in the manufacturing industry, and other application areas include: injection molding industry, construction industry, stone ...