Industrial robots can be operated according to pre-programmed programs, or they can directly accept human command actions, relying on their own power and control talent to complete various functions. Today's industrial robots are gradually developing in the direction of having the talent of walking, a variety of perception talents, and the talents of strong adaptation to the working environment. As a member of the Kawasaki Robotics team, the Kawasaki Robot needs to ensure the accuracy of the repair process in accordance with strict requirements and avoid unnecessary damage.
Kawasaki Kawasaki robots may present the following common defects when repairing:
1. Overload
Overload is a common problem with robots, usually due to a defect in the circuitry, which causes the load to exceed the load set by the machine at the factory, triggering a maintenance mechanism and making the machine unusable.
2. There is an abnormal sound during operation
First of all, due to the loose gear, resulting in the mechanical parts of the operation are worn, perhaps the parts are repeatedly resisted, trembling leads to the announcement noise, and the parts may be completely damaged or mechanical defects overnight, so we should pay attention to the usual maintenance and lubrication of the machine, and often check to avoid loosening between parts.
3. The operating power is reduced
Perhaps it is due to a defect in the circuit, which causes the machine to not receive the normal operation signal, or it may be due to the poor touch that leads to the weakening of the received signal. Usually pay attention to the maintenance of the circuit to avoid damage and affect the operating power.
Kawasaki Kawasaki Robot Patching Process:
1. When repairing, admit the problem, part of the robot defect is the drive damage and machine component defects, and ask the customer who needs to repair to present the root cause of the problem and understand the defect.
2. The condition of the allowing problem, such as whether the circuit is not smooth or the load exceeds the rated load.
3. After the technical inspection of the defect, admit whether the defect can be repaired, assuming that the defect cannot be repaired, it is necessary to replace the parts in time.
4. When repairing Kawasaki Robot, it is necessary to replace or completely repair the defective original according to the circuit principle, find out the cause of the defect, carry out a thorough overhaul, avoid the recurrence of such defects, consult the customer's opinion before repairing, and replace the original under the condition that the customer agrees with the replacement and the funds are in place.
5. Assuming that a part of Kawasaki Robot has a defect, it means that the whole is now aging and damaged, so after thoroughly repairing the original parts that have been admitted to be defective, further overhaul will be carried out for the whole machine, clean the aging and possible risk parts, and carry out robot maintenance and cleaning to extend the service life of the machinery.
Kawasaki Kawasaki Robot Repair and Maintenance Precautions are all of the above, when repairing industrial robots, it is necessary to first identify the cause of defects, and then carry out professional skills according to the defects, so that the talent can better deal with defects. | 
Contact
working hours
