Introduction: The reflector and receiver of this type of ultrasonic sensor are in the same housing. A single ultrasonic transducer is cyclically switched between transmit and receive modes. The target object acts as a reflector of sound waves.
Specifications:General characteristics | Sensing range | 15 ... 200 mm | Adjustment range | 20 ... 200 mm | Blind spots | 0 ... 15 mm | Standard target plates | 100 mm x 100 mm | Transducer frequency | Approximately 400 kHz | Response delay | About 30 ms | Indicator/Action key | Yellow LED | Displays the illumination status
Flashing: Target detected under the TEACH-IN function | Red LED | Solid red light: An error occurred
Flashing red light: No target detected under the TEACH-IN function | Electrical characteristics | Operating voltage | 10 ... 30 V DC, ripple 10%SS | No-load current | ≤ 30 mA | input | Enter the type | 1 TEACH_IN input
Working distance 1: -UB ... +1 V, Working distance 2: +6 V ... +UB
Input impedance: > 4,7 kΩ TEACH-I pulse: ≥ 1 s | output | Output type | 1 switch output, PNP NO / NC, programmable | Rated operating current | 100 mA, short-circuit/overload protection | Default setting | Switching point A1 20 mm Switching point A2 200 mm | Voltage drop | ≤ 3 V | Repeatability | ≤ 1 % | Switching frequency | ≤ 13 Hz | Hysteresis range | 1% of set working distance | Temperature drift | ± 1,5 % of full-scale value | Licensing and Certification | UL recognized | cULus recognized, Class 2 power supply | CCC certified | Products with a maximum operating voltage of 36 volts do not need to be certified and therefore do not need to be equipped with the CCC-mark. | Surroundings | Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | Mechanical properties | Connection type | Connector M12 x 1, 4-pin | Ingress protection | IP67 | material | | | enclosure | Brass is nickel-plated | | Transducers | epoxy/hollow glass sphere mixture; Polyurethane foam, outer shell PBT | weight | 25 g |
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
Germany P+F/Beijiafu inductive sensor NBN4-F25-2Z4L weight 405g
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Through-beam photoelectric sensors LD31/LV31/76a/115/136
Product Description: Thru-beam sensor, 30 m detection range, red, low, DC version, 2 push-pull outputs, transmitter off, fixed cable, high visibility LED, powerful push-pull output, compact and stable housing, degree of protection II
Our customer-centric ...
|
|
P+F/Beam Ultrasonic Barrier UBE1000-18GM40A-SE2-V1
Introduction: There is no electrical connection between the transmitter and receiver, and while the sensor is mounted in such a way that it does not affect the functionality of the ultrasonic through-beam sensor, it is recommended to mount the transmitter face up when the sensor is mounted vertically to prevent the accumulation of dust particles.
...
|
|
P+F Multiturn Absolute Encoder AVM58-H
Introduction: In this construction, the gear structure is added on the basis of the singleturn code disc, through these interconnected gears, we can measure up to 16,384 turns (14 bits), so that the total accuracy of the encoder is 16 bits (single turn) plus 14 bits (number of turns), or the total precision ...
|
|
P+F/Capacitive sensor CBN8-F64-E1 8mm non-flush
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F capacitive sensor CJ40-FP-A2-P1 is non-flush mounted
Introduction: P+F capacitive sensor CJ40-FP-A2-P1 40 mm, non-flush; 4-wire DC; The switching distance can be set in a wide range by using a potentiometer. One terminal connector** can be fitted with up to two conductors with the same cross-sectional area of the core.
...
|
|
P+F Isolation Barrier K Series 35mm DIN Rail
Introduction: The widely used K series intrinsically safe isolation grid adopts DIN rail installation, which is flexible and convenient. The intrinsically safe barriers of the K series can be easily plugged into the power rails assembled with the DIN rails. This installation method can greatly save ...
|
|
P+F/Inductive sensor NBN4-F25K-2E2/2Z4L/E8 4mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/DK20-9, 5/110/124 RGB light
Product introduction: The characteristics of P+F color mark sensor are: low contrast detection under high resolution, short response time; It is not sensitive to the deviation of the height and angle of the detected material; The optical lenses are 90° interchangeable. Just press the TEACH-IN button and the emitter LED will automatically select the best ...
|
|
P+F/Capacitive sensor CBN7-F46-E1-Y291652 3-wire DC
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Capacitive sensor CBN15-F64-A2 15mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Inclination sensor INX360D-F99-U2E2-V15 range 0~360°
Product Description: The new generation of the F99 inclination measurement sensor is ideal for industrial environments due to its simplicity, durability and compact housing. The F99 inclination measurement sensor offers a standardized 4 ... 20 mA analogue interface with a measuring range of 0 ... 360° between, no need for expensive total ...
|
|
P+F/Capacitive sensor CBB8-18GK75-E2-V1 with a diameter of 18 mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F inductive sensor NBN5-F7-E0 5 mm non-flush
Introduction: P+F inductive sensor NBN5-F7-E0 5 mm non-flush, switch function normally open (NO), output type NPN, rated working distance 5 mm, installation non-flush, output polarity DC, ensure operating distance 0 ... 4,05 mm
...
|
|
P+F inductive sensor NBB2-12GM50-E3-V1 2 mm
Introduction: Smooth or threaded stainless steel cylindrical housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indicates M8, M12 connector connection or terminal wiring mode; PVC, PUR or silicon cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR output mode to ...
|
|
The P+F incremental encoder AH40 weighs approx. 160 g
Introduction: Incremental Encoder AH40, Industry Application: Textile Machinery, Bending Machinery, Printing Machinery, Metallurgical Industry, Elevator Product Structure: Empty Row Shaft, Outer Diameter (mm): 40mm, Bore Diameter/Shaft Diameter (mm): 8mm, Resolution (CPR): 1-1024 PPR, Working Voltage: 4,75... 30 V D ...
|
|
P+F/Inductive sensor NBN4-12GM50-E2-C-V1 4mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/Capacitive sensor CJ30-50K10-E0123-Y46139 cable 2m
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
Germany P+F/Bejiafu capacitive sensor CJ15+U4+A2 four-wire DC
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F inductive sensor NBB2-V3-E2 normally open 2 mm
Introduction: Inductive proximity sensors are the most advanced products for most applications, ranging from mechanical instruments and automation equipment to the need for high-precision, non-contact detection of metal targets. As a market leader for this type of product, we offer our customers innovative and high-quality inductive ...
|
|
Contact
working hours
