Product Description: Reflective sensor with polarization filter, plastic housing, 5 m detection range, red light, adjustable sensitivity, on/off when light/dark, DC type, PNP output, M8 plug, compact design, easy to use, extremely bright and clear light spot, all-metal threaded mounting, clear LED indication, power supply, switching status, stable output.
Product Description | Retroreflective sensor with polarization filter, M18 threaded housing design, plastic housing, front optical face, 4 m detection range, red light, on/dark, DC version, 2 PNP output, fixed cable |
General specifications | Effective detection range | 0 ... 4 meters | Threshold detection range | 5.5 meters | light source | LED | Light | Modulated visible red light, 640 nm | Polarization filters | be | Spot diameter | About. 200 mm at 5.5 m | Divergence angle | About. 2° | Functional safety-related parameters | MTTF d | 920 a | Task Time (TM) | 20 a | Diagnostic Coverage (DC) | 0％ | Indicators/means of operation | Functional metrics | LED yellow: lights up when the beam is received; Flashes when stability control is lost; Turns off when the beam is interrupted | Electrical Specifications | Operating voltage | 10 ... 30 V DC | yield | Toggle the type | Light/Dark | Signal output | 2 PNPs, complementary, short-circuit protected, open-circuit collector | Compliance with standards and directives | Standards Compliance | | | Product standards | EN 60947-5-2：2007
IEC 60947-5-2：2007 | Mechanical Specifications: | Ingress protection | IP67 | connect | 2 m fixed cable | material | | | housing | PC | | Optical end faces | PMMA | | cable | PVC |
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action and every detail of the service is professional and careful, can we meet or even exceed the expectations of customers, so that customers can be satisfied and recognize us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
|
More on that
|
P+F/Inductive sensor NBN30-U10-E2 has a working distance of 30 mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F capacitive sensor CJ10-30GK-WS housing diameter 30 mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/KCD2-E2L sensor output interface terminal
Product Introduction: P+F Sensor Output Interface Terminal KCD2-E2L Sensor Output Interface Terminal with Wire Disconnection Monitoring[/backcolor]
Indicator/Operation Method:
Yellow LED: Switch output Wire disconnects: LED off, output locked
Electrical Technical Specifications: ...
|
|
P+F inductive sensor NBB2-12GM50-E3-V1 2 mm
Introduction: Smooth or threaded stainless steel cylindrical housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indicates M8, M12 connector connection or terminal wiring mode; PVC, PUR or silicon cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR output mode to ...
|
|
P+F/Capacitive sensor CBN15-F64-A0-V31 non-flush 15mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Capacitive sensor CBN15-30GK60-A0 NPN15mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Capacitive sensor CBN15-F64-A2-0, 3M-V1
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Through-beam photoelectric sensors LD31/LV31/76a/115/136
Product Description: Thru-beam sensor, 30 m detection range, red, low, DC version, 2 push-pull outputs, transmitter off, fixed cable, high visibility LED, powerful push-pull output, compact and stable housing, degree of protection II
Our customer-centric ...
|
|
P+F inductive sensor NBN5-F7-E0 5 mm non-flush
Introduction: P+F inductive sensor NBN5-F7-E0 5 mm non-flush, switch function normally open (NO), output type NPN, rated working distance 5 mm, installation non-flush, output polarity DC, ensure operating distance 0 ... 4,05 mm
...
|
|
P+F/Inductive sensor NBN4-12GM40-E0/E2 DC 4mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F inductive sensor NBB2-V3-E2 normally open 2 mm
Introduction: Inductive proximity sensors are the most advanced products for most applications, ranging from mechanical instruments and automation equipment to the need for high-precision, non-contact detection of metal targets. As a market leader for this type of product, we offer our customers innovative and high-quality inductive ...
|
|
P+F/Tilt sensor INX360D-F99-I2E2-5M IP68/IP69K
Product Description: The new generation of the F99 inclination measurement sensor is ideal for industrial environments due to its simplicity, durability and compact housing. The F99 inclination measurement sensor offers a standardized 4 ... 20 mA analogue interface with a measuring range of 0 ... 360° between, no need for expensive total ...
|
|
P+F/Encoder RVI58N-*******1 Incremental
Introduction: An incremental encoder provides a fixed number of pulses in one revolution, and the speed is calculated by the number of pulses measured per unit of time. To measure angles and positions, it is common to start counting from a starting reference point. The accuracy of incremental encoders depends on mechanical and electrical factors ...
|
|
P+F/Double Sheet Sensor UDC-18GM-400-3E1-Y194142
Product Introduction: Ultrasonic double sheet detector is used to automatically and at high speed to distinguish substrate materials, labels, sheet-fed and double-fed, so as to protect the machine from waste in the production process. The whole system consists of an ultrasonic transmitter, an ultrasonic receiver and an external or built-in ...
|
|
P+F/Capacitive sensor CBN15-18GS75-E2 normally open PNP
Introduction:P+F The CBN15-18GS75-E2 capacitive sensor is usually measured by one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When there is an object moving towards the proximity switch, ...
|
|
P+F/Optical Fiber Optic Sensor SU19/110/115/123 cable 160 mm
Product Introduction: Classic Series Fiber Optic Sensor, with Display, Main Module, Push-Pull Output, External Teach-in, Fixed Cable, Classic Line with Display, AGC (Automatic Gain Control) 30μs high-speed mode
Detailed parameters:
We take the guest ...
|
|
P+F Capacitive Sensor CJ40-FP-A2-P4 4-wire
Introduction:P+F capacitive sensor CJ40-FP-A2-P4 series rectangular, housing material is POM / metal, output type 4 wires, non-flush mounting, DC voltage type, screw terminal connection type, protection class IP65.
...
|
|
P+F/M100/MV100-6090/102/115 through-beam photoelectric sensors
Product Introduction: Thru-beam sensor, miniature design, miniature sensor light forming slit, easy to use, very bright, high visible light point, full metal threaded mounting.
Our customer-centric service concept: the pursuit of a full range of services is a ...
|
|
P+F inductive sensor NBB20-U1-Z2 flush 20 mm
Description: Inductive sensors are available in smooth or threaded stainless steel housings, reverse polarity protection and short-circuit protection, LED status indication, M8, M12 connector connection or terminal wiring, PVC, PUR or silicone cable outlet, 2-wire, 3-wire, 4-wire DC, AC, N...
|
|
P+F/Capacitive sensor CJ4-12GK-N 4mm non-flush
Introduction: Capacitive sensors can be used to detect targets in almost any material, including metal. These sensors are used in a wide range of applications for level and flow control, mainly liquids, particles and powders.
...
|
|
Contact
working hours
