Product introduction: Miniature photoelectric slot sensor is used to detect small parts, J-shaped design, fork width 5mm, infrared light, NPN output, fixed cable, miniature design, optimized for detecting small parts, high switching frequency, simple and quick installation, clearly visible LED function display.
Specifications:
Product Description | Compact optoelectronic fork sensor for small parts, T-shaped design, fork width 5 mm, infrared light, NPN output, fixed cable |
General characteristics | The type of light source | IRED | The type of light source | Infrared continuous light, 940 nm | Target size | 0.8 x 1.8 mm | Groove width | 5 mm | Functional safety parameters | Mean time to failure (days) | 3760 a | Service life (...) Month... days) | 20 a | Scope of diagnosis | 0 % | Indicator/Action key | Function display | The red LED lights up when it receives a beam | Electrical characteristics | Operating voltage | 5 ... 24 V DC, 2 stage | output | Switch type | Turn on when it's light/dark | Signal output | 2 NPN complementary outputs, overvoltage protection | Conformity with the system of standards and norms | Directive compliant | | | EMC Directive 2004/108/EC | EN 60947-5-2:2007 + A1:2012 | Surroundings | Degree of contamination | 2 | Mechanical properties | Ingress protection | IP50 | connect | 2 m PVC cable, 4 x 0.09 mm2 | material | | | enclosure | PBT |
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
P+F inductive sensor NBN4-F25K-E8 4 mm
Introduction: Smooth or threaded stainless steel cylindrical housing for standard inductive sensors; reverse polarity protection and short circuit protection; LED status indicates M8, M12 connector connection or terminal wiring mode; PVC, PUR or silicon cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR output ...
|
|
P+F/Capacitive sensor CJ4-12GK-N-Y235563 non-flush 2-wire
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Pixel Sensor GL30-RT / 32 / 40A / 98A Light/Dark
Product Introduction: Photocell Sensor, Zinc Die-Cast Housing, 30mm Slot Width, Red Light, Light/Dark, Sensitivity Regulator, DC Version, PNP Output, 3-Pin M8 Plug, Optimized for Detecting Small Parts, High Switching Frequency, Multi-Device Installation Possible, No Mutual Interference (No Crosstalk), Sensitivity ...
|
|
P+F Capacitive Sensor CJ40-FP-A2-P1 40mm
Introduction: P+F capacitive sensor CJ40-FP-A2-P1 40 mm, non-flush; 4-wire DC; The switching distance can be set over a wide range using a potentiometer. Up to two conductors with the same core cross-sectional area can be installed with one terminal connector.
...
|
|
The P+F incremental encoder AH40 weighs approx. 160 g
Introduction: Incremental Encoder AH40, Industry Application: Textile Machinery, Bending Machinery, Printing Machinery, Metallurgical Industry, Elevator Product Structure: Empty Row Shaft, Outer Diameter (mm): 40mm, Bore Diameter/Shaft Diameter (mm): 8mm, Resolution (CPR): 1-1024 PPR, Working Voltage: 4,75... 30 V D ...
|
|
P+F Inductive Sensor NBB15-30GM50-WS Quasi-flush
Summary: Inductive proximity sensors are the preferred product for most applications that require the precise and non-contact detection of metal objects in mechanical or automated equipment. As a pioneer and market leader in the field of sensors, we offer our customers innovative, high-quality electrical products.
|
|
P+F through-beam photoelectric sensor GD18-S/GV18-S/73/120
Description: Thru-beam sensor, miniature design, light forming slit of miniature sensor, easy to use, very bright, high visible light point, all-metal threaded mounting, high-efficiency series mounted in a short M18 plastic housing, suitable for standard applications.
...
|
|
P+F/Inductive sensor NBN4-12GM40-E0/E2 DC 4mm
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/NJ1.5-PD-E02-1.250-V95 1,5mm
Introduction: NJ1.5-PD-E02-1.250-V95 inductive sensor proximity switch adopts 4-wire DC anti-welding interference design, the sensing range is 1.5mm, and the rated value is 3000psi.
Product Details
Switch function ...
|
|
P+F Inductive Sensor NBB20-U1-A2 4-wire DC
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F OBE12M-R100-S2EP-IO through-beam photoelectric sensor
Introduction: The transmitter and receiver on a thru-beam photoelectric sensor are aligned in opposite directions. The advantage of this is that the beam reaches the receiver directly, so a long detection distance and high excess gain can be achieved. These sensors are capable of reliably detecting almost any object. Angle of incidence, surface characteristics ...
|
|
P+F capacitive sensor CBB10-30GKK-A2 10mm flush
Introduction:P+F Capacitive Sensor CBN5-F46-E2-10M Flat Housing; reverse polarity protection; Fixing slot for cable tie, through-hole for screw mounting, cULus listed, general use.
Product parameters
...
|
|
P+F/Reflector Type Photoelectric Switches ML100-55/103/115 Compact
Product Introduction:Retroreflective Plate Sensor with Polarization Filter, Plastic Housing, 5 m Detection Range, Red Light, Adjustable Sensitivity, Switch-On When Bright/Dark, DC Type, PNP Output, Fixed Cable, Compact Design, Easy to Use, Clear LED Indication, Power Supply, Switching Status, Stable ...
|
|
P+F/Inductive sensor NBB20-L2-A2-V1 flush mounted
Introduction: Smooth or threaded stainless steel housing for inductive sensors; reverse polarity protection and short circuit protection; LED status indication; M8, M12 connector connection or terminal wiring; PVC, PUR or silicone cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR and AS ...
|
|
P+F/Inductive sensor NBN4-12GK50-E0/E2 voltage drop ≤3V
Introduction: Germany P+F/Beijiafu inductive sensor is the use of electromagnetic induction to measure physical quantities such as displacement, pressure, flow, vibration, etc. into the change of the self-inductance coefficient and mutual inductance coefficient of the coil, and then converted by the circuit into the output of voltage or current change, to achieve non-electric to electric ...
|
|
P+F/GJF retro-reflective sensor GLV18-55/115/120
Product Description: Retroreflective sensor with polarization filter, M18 threaded housing design, plastic housing, front optical face, 4 m detection range, red light, light and dark on, DC type, 2 PNP output, fixed cable, high-efficiency wire in M18 plastic housing Standard application, very high detection range
|
|
P+F inductive sensor NBB0,6-3M22-E2 pulse
Description: P+F Inductive sensor NBB0,6-3M22-E2 pulse, nominal working distance: 0,6 mm, operating voltage: 10 ... 30 V, switching frequency: 0 ... 1400 Hz
peculiarity
0.6 mm, flush
Miniature design
Product parameters
...
|
|
P+F/Inertial Measurement Device IMU360D-F99-B20-V15
Product Description: The new generation of the F99 inclination measurement sensor is ideal for industrial environments due to its simplicity, durability and compact housing. The F99 inclination measurement sensor offers a standardized 4 ... 20 mA analogue interface with a measuring range of 0 ... 360° between, no need for expensive total ...
|
|
P+F/Print Marker Luminescence Scanner DK50-UV-190 / 115B / 147
Product Introduction: Color is usually the distinctive feature of a product, so color recognition and reliable detection play an increasingly important role in industrial automation. The color sensors of P+F are very good and cover most applications, e.g. for fixed detection distances.
|
|
Germany P+F/Bejiafu capacitive sensor CBN10-F46-E2-0,4M-V3
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
Contact
working hours
