Product Description: The new generation of the F99 inclination measurement sensor is ideal for industrial environments due to its simplicity, durability and compact housing. The F99 inclination measurement sensor offers a standardized 4 ... 20 mA analogue interface with a measuring range of 0 ... 360°, no need for expensive bus systems. The spring-loaded block system speeds up the reaction time, and we offer contactless sensors: single and double axes. With just two Teach-In buttons, you can easily adjust the switch output.
Specifications:
General specifications | type | Tilt sensor, 1 axis | Measuring range | 0 ... 360° | Absolute accuracy | ≤±0.5° | Response delay | ≤20 ms | resolution | ≤0.1° | Repeatability accuracy | ≤±0.1° | Temperature effects | ≤0.027°/ K | Functional safety-related parameters | MTTF d | 300 a | Task Time (TM) | 20 a | Diagnostic Coverage (DC) | 0％ | Indicators/means of operation | Operation indicator | LED, green | Teach indicators | The 2 LEDs are yellow (on/off state) and flashing | keystroke | 2 buttons (switching point programming, evaluation range programming) | Switch status | 2 yellow LEDs: Switching status (per output) | Electrical Specifications | Operating voltage | 10 ... 30 V DC | No-load current | ≤25 mA | Time delay before availability | ≤200 ms | Toggle the output | Output type | 2. Switch output PNP, NO, reverse polarity protection, short circuit protection | Operating current | ≤100 mA | Voltage drops | ≤3 V | Analog output | Output type | 1 x Current Output 4 ... 20 mA | Load resistance | In U b = 10 ... At 18 V,
0 ... 200ΩU B = 18 ... At 30 V, 0 ... 500Ω | Compliance with standards and directives | Standards Compliance | | | Impact and impact resistance | 100 g according to DIN EN 60068-2-27 | | standard | EN 60947-5-2：2007
IEC 60947-5-2：2007 | Approvals and certificates | UL recognized | cULus is listed, Class 2 power supply | CSA approved | cCSAus is listed as a general-purpose Class 2 power supply | CCC approved | Products with a rated voltage of ≤ 36V do not require CCC certification/marking | E1 type approval | 10R-04 | Environmental conditions | Ambient temperature | -40 ... 85°C（-40 ... 185°F） | Storage temperature | -40 ... 85°C（-40 ... 185°F） | Mechanical Specifications: | Connection type | 5 m, PUR cable 5 x 0.5 mm 2 | Housing materials | PA | Ingress protection | IP68 / IP69K | block | 240 grams |
The company has been customer-centric, the concept of creating value for customers, winning the market with quality and service, and sincerely hopes to cooperate with all sectors of society to create success, create brilliance together, and work together to create a better tomorrow! In line with the concept of credibility and service-oriented, the company warmly welcomes new and old customers to inquire, visit and negotiate business!
|
More on that
|
P+F/Capacitive Sensor CBB10-30GKK-W Sensing Surface ABS
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Laser through-beam sensor OBE1500-R2F-SE0-L
Introduction: The laser through-beam sensor OBE1500-R2F-SE0-L has a very flat design and can be installed directly without the need for a mounting bracket; DuraBeam Laser Sensors - Durable enough to work like LEDs; It can achieve a long detection range teaching; Detect small ...
|
|
P+F/VLD700-F280-2E2-1000 laser diode
Product Introduction: Parameterization of the SmartRunner Detector is very simple. The laser line of the vision sensor is projected onto the desired background and programmed using teach-in. With the Data Matrix control code, the user can set additional parameters such as the detection area without a PC ...
|
|
P+F Zener Barrier Z System DIN rail mounting
Introduction: P+F/Plus Forziner Barrier - cost-saving, easy to install explosion protection
Product Details
Zener barriers provide cost-effective explosion protection for a wide range of applications in process automation systems. Transferred to a dangerous place ...
|
|
P+F/OBE20M-R100-S2EP-IO-V31-L through-beam type
Introduction: The transmitter and receiver on a thru-beam photoelectric sensor are aligned in opposite directions. The advantage of this is that the beam reaches the receiver directly, so a long detection distance and high excess gain can be achieved. These sensors are capable of reliably detecting almost any object. Angle of incidence, surface characteristics ...
|
|
P+F/Beam Ultrasonic Barrier UBEC300-18GH40-SE2-V1
Introduction: An ultrasonic through-beam sensor consists of a transmitter and a receiver mounted facing each other. Ultrasonic through-beam sensors work by emitting sound waves from the transmitter to the receiver to detect objects through the sound beam being interrupted by the target object. The emitter produces ultrasonic ...
|
|
P+F/Sensor NBN4-12GM40-E2-V1 4 mm
Introduction: The inductive sensor is to use electromagnetic induction to convert the measured physical quantities such as displacement, pressure, flow, vibration, etc. into the change of self-inductance coefficient and mutual inductance coefficient of the coil, and then convert the output of voltage or current change by the circuit to realize the conversion of non-electricity to electricity.
...
|
|
P+F/The capacitive sensor CJ10-30GK-WO has a working distance of 10 mm
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F/Background Suppression Sensor MLV41-8-HV-60-IR-5360
Product Description: Visolux/ Pepperl+Fuchs has developed a range of special sensors for industrial use that extend the range of applications for common sensors. These special photoelectric sensors allow the customer to find a more suitable solution.
Specifications:
...
|
|
P+F/Inductive sensor NBN30-L2-E2-V1 30 mm
Introduction: Smooth or threaded stainless steel cylindrical housing for standard inductive sensors; reverse polarity protection and short circuit protection; LED status indicates M8, M12 connector connection or terminal wiring mode; PVC, PUR or silicon cable outlet; 2-wire, 3-wire, 4-wire DC, AC, NAMUR output ...
|
|
P+F/Capacitive sensor CJ4-12GK-N-10M with a rated voltage of 8V
Introduction: The measurement of P+F/Capacitive sensors is usually one plate that makes up the capacitor, and the other plate is the housing of the switch. This housing is usually grounded or connected to the enclosure of the device during the measurement process. When an object moves towards a proximity switch, whether it is a conductor or not...
|
|
P+F Safety Barrier Module H Series 16 slots
Introduction: The H-Series can be connected to hazardous area field devices and control systems by mounting multiple isolation barriers on terminal boards. Compared to a single interface module, the terminal block greatly simplifies wiring and saves costs. The terminal block is equipped with a sturdy plastic enclosure for quick and secure installation in the cabinet.
|
|
P+F/Switching Amplifier KFD2-SOT3-Ex2 24V DC
Introduction: The K-series isolation barriers provide users with a comprehensive solution to ensure reliable & economical signal transmission between field devices and control rooms. Whether the user selects a single signal isolation module or performs large-scale system integration, the K Series ...
|
|
P+F/Beam Ultrasonic Barrier UBE4000-30GM-SA2-V15 nickel-plated brass
Introduction: There is no electrical connection between the transmitter and receiver, and while the sensor is mounted in such a way that it does not affect the functionality of the ultrasonic through-beam sensor, it is recommended to mount the transmitter face up when the sensor is mounted vertically to prevent the accumulation of dust particles.
...
|
|
P+F through-beam photoelectric sensor GD18-S/GV18-S/73/120
Description: Thru-beam sensor, miniature design, light forming slit of miniature sensor, easy to use, very bright, high visible light point, all-metal threaded mounting, high-efficiency series mounted in a short M18 plastic housing, suitable for standard applications.
...
|
|
P+F Zener Barrier Z System 35 mm DIN rail
Introduction: P+F/Plus Forziner Barrier - cost-saving, easy to install explosion protection. Mounted directly on a 35 mm DIN rail. With the accessory, the required grounding can be carried out directly on the DIN mounting rail.
Product Details
Zen ...
|
|
P+F/Optical Fiber Optic Sensors SU18/16/35/40a/110/115/126a
Product Introduction: Fiber Optic Sensors for Glass and Plastic Fibers, Basic Production Line for DIN Rail Mounting, High Power Version, Sleek Design, Selectable 3 Response Times, Mutual Interference Prevention (No Crosstalk)
Detailed parameters:
...
|
|
P+F Capacitive Sensor CJ40-FP-A2-P4 4-wire
Introduction:P+F capacitive sensor CJ40-FP-A2-P4 series rectangular, housing material is POM / metal, output type 4 wires, non-flush mounting, DC voltage type, screw terminal connection type, protection class IP65.
...
|
|
P+F/Through-beam photoelectric sensor OBE2000-R2-SE0 20 g
Description: The P+F/P+F/Through-beam photoelectric sensor OBE2000-R2-SE0 with its ultra-small housing design and 45° cable outlet provides maximum installation freedom, even in very space-constrained conditions.
Product Features ...
|
|
P+F/Through-beam photoelectric sensor LA39/LK39/31/40a/116
Introduction: P+F/Beijiafu through-beam photoelectric sensor LA39/LK39/31/40a/116 bright/dark on, switchable; Mounting accessories are available; The degree of protection is IP67. Inductive range adjuster, bright/dark switch.
Products...
|
|
Contact
working hours
