Introduction: EPSON/Epson N2 six-axis robot has a more compact structure than the C4 robot, and can be set in the same range of 600mm ×600mm working space as manual work. Compared to conventional robots, about 40% of the space is saved.
Advantages of the product:
A new six-axis robot with a folding arm.
The special robot for precision reprinting opens the era of unit automation.
Reduce installation area by 40% and occupy less space.
As Epson's first 6-axis robot with a folded design, the N2 robot has a more compact structure than the C4 robot and can be set within a working space of 600 mm × 600 mm consistent with manual work. Compared to conventional robots, about 40% of the space is saved.
Cycle time is reduced by about 30%, installation and teaching are convenient, and productivity is greatly improved.
The N2 robot combines the arching movements of a SCARA robot with the degrees of freedom of a 6-axis robot. With a flat-cut motion, the N2 robot's wrist can be rotated 180° to reach the target in the shortest distance, which is about 30% faster than conventional models.
Free layout setting, continuous movement 360 degrees.
Compared to conventional models, the N2 robot reduces the useless movement of the first joint. The setting environment of the equipment mechanism in all directions of the robot activity is particularly practical. The free layout setup allows the N2 robot to perform a variety of tasks in tight spaces.
Specifications of the product.
Installation type.
Desktop mounting*1.
installation of ceilings.
Degree of freedom.
6 hyperbolic cosine value. 6 hyperbolic cosine value.
Maximum speed of movement.
Joint #1: 297°/s.
Joint #2: 297°/s.
Joint #3: 356°/s.
Joint #4: 356°/s.
Joint #5: 360°/s.
Joint #6: 360°/s.
Load*2.
Rating: 1kg.
Maximum: 2.5kg.
Allowable moment of inertia*3.
Joint #4: 0.2kgm2.
Joint #5: 0.2 kgm2.
Joint #6: 0.08 kgm2.
Origin reset.
There is no need to restore the origin.
The user's line interface.
15-pin (D-sub)
8-pin (RJ45) Cat5e or equivalent (2 cables)
(also used in pressure sensors)
User pneumatic interface.
φ6mm tube x2,
Allowable pressure value: 0.59Mpa.
（6kgf/cm2）（89psi）
Installation environment.
Standard type.
Maximum range of motion.
P-point: 450mm through the center point of the 4th, 5th, and 6th joints.
The surface of the wrist flange.
532.2 mm.
Body weight (without cable)
19 kg.
Repeatability accuracy.
Joints #1-#6: ±0.02mm.
Maximum range of motion.
Joint #1: ± 180°.
Joint #2: ± 180°.
Joint #3: ± 180°.
Joint #4: ± 195°.
Joint #5: ± 130°.
Joint #6: ± 360°.
The power of the motor.
Joint #1: 100W.
Joint #2: 100W.
Joint #3: 100W.
Joint #4: 30W.
Joint #5: 30W.
Joint #6: 15W.
Safety standards.
CE certification: EMC Directive, Machinery Directive, RoHS Directive KC certification/KCS certification.
Applies to controllers.
RC700-A。
Our customer-centric service concept: a full range of services to pursue high-quality, high-standard services, the pursuit of service process details. It is impossible for interests to blossom from a lie. Only when all processes, actions, and daily details of the service are professional and careful, can we exceed customer expectations and make customers satisfied and recognized. Integrity, professionalism, affordability, and speed, so that you can rest assured. Integrity and professional service, reasonable price, continuous improvement" is our service concept.
This article introduces Epson/Epson N2 six-axis robot products, if you are interested in Epson/Epson N2 six-axis robot, also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Epson N6-1000S/SR/SB/SBR 6-axis robot Arm length 1010mm
Introduction: Epson N6-1000S/SR/SB/SBR 6-axis all-in-one robot, controller built-in compact structure, easy to install! The built-in controller reduces installation space requirements and greatly simplifies initial installation and reconfiguration. Wrist hollow design The cable can be passed through the arm ...
|
|
Epson/Epson GX8 SCARA Robot GX8-A552S
Introduction: The GX8 series is further upgraded on the basis of the original G6 series high performance, which is used for precision assembly of small parts, with the advantages of high speed and high precision. High speed and high precision to achieve precision assembly of small parts.
...
|
|
EPSON/Epson G1-171/221 (4-axis/3-axis) robot 8kg
Introduction: G1-171/221 (4 axes/3 axes) robot body weight is only 8kg, Epson's lightest G series robots, you can choose 175mm or 225mm shaft arms, 3 axes specifications can increase the load, load rating 0.5kg/maximum 1kg (4 axes), rated 0.5kg/maximum 1.5kg (3kg).
...
|
|
EPSON/Epson Robot SCARA G6 Payload 6kg
Introduction: Epson Robot SCARA G6 is used for small parts assembly, with high speed and high precision, **Large handling load of 6kg, optional shaft arm length: 450mm, 550mm or 650mm, available in table, ceiling and sidewall mount models, ISO clean (ISO ...
|
|
EPSON/Epson Robot 6-axis C8XL LOAD 8KG ARM SPAN 1400MM
Introduction: The EPSON/Epson C8XL medium-sized long-range 6-axis robot uses a slim linear design to deliver power, speed, and powerful overall performance while maintaining a load capacity of up to 8Kg. The slim, linear design allows you to multitask in tight spaces. It's like Epson ...
|
|
Epson SCARA Robot G3-301 RC700-A Controller
Introduction: The Epson/Epson SCARA Robot G3-301 arm contains all the high-performance components and design concepts despite its small size, and other G-series robots, such as the high-rigidity arm and PowerDrive servo technology, also have high performance for more compact, lower ...
|
|
EPSON C8L Long Range 6-Axis Robot ARM SPAN 981MM
Introduction: The Epson/Epson C8L long-range 6-axis robot has high performance and a greater range of motion while maintaining a unique slim linear suite. With a load of up to 8Kg, it can enter a small space and complete a variety of medium-sized six-axis work with a small footprint. Just like the Epson C4 robot ...
|
|
Epson/Epson G1 Mini SCARA Robot 175 | 225
Introduction: EPSON/Epson G1 mini SCARA robot is suitable for high-precision, high-speed, high-performance, low-cost applications. Ideal for hard drive assembly, laboratory automation, electronics assembly, medical device assembly, photonics, semiconductors, communications, solar and other applications...
|
|
EPSON/Epson Robot VT6L 6-axis all-in-one machine with a load of 6KG
Introduction: EPSON/Epson VT6L 6-axis all-in-one machine, cost-effective model. The controller is built-in, which saves space and is easy to install; Wrist hollow design for easy hand wiring; Battery-free motor unit for easy maintenance.
Products...
|
|
EPSON/Epson 6-axis robot C4-A1401 payload 3Kg
Introduction: In terms of robot design and performance, all new technologies are included. The C4 compact 6-axis robot, combined with our power-driven servo technology, produces the high-performance results our customers expect. At the same time, it is matched with the new RC700 controller, and the RC+7.0 software platform, which is suitable for you to ...
|
|
Epson/Epson SCARA Robot G1-221S weighs 8kg
Introduction: Epson/Epson SCARA Robot G1-221S Industry's Best Mini SCARA; With a body weight of only 8kg, Epson's lightest G series robots; Superior cycle times and accuracy; For precision assembly and press-fit applications, it is compact, highly rigid
...
|
|
Epson LS10-B SCARA Robot 600 | 700 | 800
Introduction: Epson LS10-B SCARA robot has a maximum load of 10kg, which is suitable for multiple fixtures and multiple workpieces to meet the different needs of customers, shorter cycle time, and meet the needs of high-speed operation; The new battery-free motor unit is easy to maintain and saves production time due to battery replacement.
|
|
Epson Teach Pendant TP3 weighs 1.5kg
Introduction: Epson Teach Pendant TP3 Flat Type Teach Pendant via 10.1 inch color touch screen; The TP2 uses a simple teach pendant; Left-handed universal design; Direct connection to operator unit or controller panel; 6-axis robot teaching can be carried out briskly.
...
|
|
Epson SCARA Robot G1-221S weighs 8kg
Introduction: Epson/Epson SCARA Robot G1-221S Industry-leading Mini SCARA; With a body weight of only 8kg, Epson's lightest G-series robots; Superior cycle times and accuracy; For precision assembly and press-fit applications, it is compact, highly rigid
...
|
|
Epson 6-axis medium-sized robot C8-A1401S has a maximum load of 8kg
Introduction: Epson/Epson 6-axis medium-sized robot C8-A1401S 1400mm slender arm can provide a larger range of motion, slim design to reduce machine-to-machine interference, while increasing the operating range, light and compact body design enables multi-model solution configuration to achieve
Product Features ...
|
|
Epson/Epson LS20 SCARA Robot 800 | 1000
Introduction: EPSON/Epson LS20SCARA robots are very suitable for factories that pursue high cost performance. Due to the adoption of EPSONQMEMS-based residual vibration control technology, the LS20SCARA robot can bear a higher load when running at high speed, because the speed must be reduced and ...
|
|
Epson/Epson T3-401S Compact SCARA Robot Arm length 400mm
Introduction: EPSON/Epson SCARA all-in-one machine T3-401S, the robot broke the concept of Epson's traditional SCARA robot, and completely updated the design concept of the external structure, since then T3 has opened a new era of controller-free operation. Due to the built-in design of the controller, it is possible to ...
|
|
Epson/Epson SCARA Robot G10-651S 10kg
Description: The G10 SCARA robot arm is available in 650 and 850 mm arm lengths with 180 (150 clean) or 420 (390 clean) Z-axis arm lengths; Countertop, sidewall or ceiling mounting options are also available. In addition, it is available in clean/ESD, wash-down and dust-proof models.
...
|
|
Epson/Epson G10 SCARA Robot 650 | 850
Introduction: Epson/Epson G10SCARA robots utilize Epson's innovative high-rigidity arm design to now achieve both high loads and high speeds in packaging.
G10SCARA robot arm is available in 650 and 850 mm arm lengths, 180 (150 clean) or 420 (390 clean...
|
|
Epson SCARA Robot RS3-351S Load Capacity: 1kg
Introduction: Epson SCARA robot RS3-351S has a unique slewing arm mechanism; It can realize ultra-high degrees of freedom of movement; Maximizing productivity in a confined space; The lifting structure and the full slewing arm can grip the workpiece from any direction.
Features:
Performance
...
|
|
Contact
working hours
