Introduction: EPSON/Epson LS20SCARA robots are very suitable for factories that pursue high cost performance. Thanks to the EPSONQMEMS-based residual vibration control technology, the LS20SCARA robot can take on a higher load when operating at high speeds, as the speed and acceleration must be reduced when the load is increased. LS20SCARA robots are suitable for higher load scenarios, such as the removal of large parts, loading/unloading of machinery, accumulation, assembly of machinery, transfer of industrial parts, etc. With excellent high performance and reasonable operating price, Epson LS20 has become a cost-effective robot.
The LS20SCARA is available in two models with arm lengths of 800 mm and 1000 mm, and the Z-axis length is 420 mm (390 mm for the clean version). LS20SCARA also has an ISO4 clean type. This gives Epson SCARA robots more options, ensuring that the right robot can be selected for the next application.
Advantages of the product:
High performance.
High-speed cycle times increase part throughput.
Excellent acceleration/deceleration, stable start/stop.
The maximum speed can reach 11250mm/sec (LS20-A04x), which makes the parts run quickly and accurately.
Powerful exclusive servo system design, low residual vibration.
High load and high performance.
Loads up to 20 kg and rated loads of 10 kg.
High-speed cycling can be maintained even when the load increases.
Good value for money.
Performance can be compared to expensive competition.
Standard and ISO4 cleaning models for semiconductor or other industries.
Get the same quality, reliability and service support as other Epson products at a lower price.
State-of-the-art controller and development software.
Epson RC+ saves development time with industry-leading ease of use (available with Epson RC+ 7.0)
Hundreds of language descriptions and power make it easy to get the job done the first time.
Integration options maximize system performance and reduce overall development time (see options page for more information)
It has high-performance, fast processing power.
Wide range of applications and industries.
Car.
Hard drives.
Medical.
The laboratory is automated.
Consumer products.
Industrial products.
Telecommunications.
Pharmaceutical.
Wrap.
Semiconductor.
Electron.
Specifications of the product.
The shaft arm is very long.
LS20-804S: 800mm 1st joint + 2nd joint (350+450mm)
LS20-A04S: 1000mm 1st joint + 2nd joint (550+450mm)
3rd joint (z): 420mm (390Clean)
Repeatability accuracy.
1st joint + 2nd joint: +/-0.025mm.
Third joint: +/- 0.010 mm.
Fourth joint: +/-0.010 degrees.
Load.
Maximum: 20 kg.
Rated: 10 kg.
Subscriber line.
Circuit: 15-wire (D-sub) 9-wire (D-sub)
Air circuit: 6mmx2, 4mmx2.
Weight.
LS20-804S: 47 kg.
LS20-A04S: 50 kg.
Suitable for the environment.
Temperature: 5-40°C.
Humidity: 10-80% (non-condensing)
Robot cables.
3M (Standard), 5M (Optional), 10M (Optional)
Available controllers.
RC90 controller.
Standard cycle time (load 2Kg)
LS20-804S:0.42secs。
LS20-A04S:0.45secs。
Maximum running speed.
LS20-804S (1st + 2nd joint): 9,940 mm/sec.
LS20-A04S (1st + 2nd joint): 11,250 mm/sec.
Third joint: 2,020 mm/sec.
Fourth joint: 1,400 deg/sec.
The power of the motor.
First joint: 750 watts.
Second joint: 600 watts.
Third joint: 400 watts.
Fourth joint: 150 watts.
Other.
Insertion force: 250N (25.49kgf)
U moment of inertia (Max/Rated): 0.45/0.05kg*m2.
Measurement.
Mounting hole diameter (mm): 200x200 (4-M16)
Z-axis diameter: 20 mm.
Optional arm configuration.
Installation Type: Desktop.
Cleaning: ISO4 cleaning.
Options.
Visually guided (CV2 or PV1)
。 .NET support (Epson RC+7.0API)
Device network, Ethereum/IP, live bus, EtherCat, CC-Link.
Conveyor belt tracking.
GUI construction.
Pressure sensors.
Software.
Development software: Epson RC+7.0.
The company respects the enterprise spirit of practicality, struggle and responsibility, creates a good corporate environment with integrity, win-win and creates business philosophy, and takes new management mode, perfect technology, thoughtful service and excellent quality as the basis for survival. We always adhere to the customer first, serve customers, and impress customers with their own services. Always adhering to the business philosophy of honesty and win-win, we have won the trust of many customers with preferential prices, strict quality, fast product deadlines and pre-sales consultation and after-sales service.
This article introduces Epson/Epson LS20SCARA Robot 800|1000 products, if you are interested in Epson/Epson LS20SCARA robot, please also contact our staff, we look forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Epson Teach Pendant TP3 weighs 1.5kg
Introduction: Epson Teach Pendant TP3 Flat Type Teach Pendant via 10.1 inch color touch screen; The TP2 uses a simple teach pendant; Left-handed universal design; Direct connection to operator unit or controller panel; 6-axis robot teaching can be carried out briskly.
...
|
|
Epson/Epson G3 SCARA Robot 250 | 300 | 350
Introduction: The EPSON/Epson G3 Series Robot Arm selector arm is available in lengths ranging from 250, 300, 350mm and 150mm (120 clean) z-axis, and is also available in tabletop, sidewall, and ceiling mount configurations and Clean/ESD configurations for more options.
G-series ...
|
|
Epson/Epson Robot C8-A1401 6-axis arm span 1400 load bearing 3-8KG
Introduction: The Epson C8 compact 6-axis robot delivers high performance with a slim linear package. With a load of up to 8Kg, different types of work can be done. The C8 has a small footprint. With a cycle time of only 0.33 seconds (at a load of 3Kg), the Epson C8 compact 6-axis robot is more than many similar ...
|
|
Epson/Epson horizontal articulated robot LS6-502 has an arm span of 500mm
Introduction: Epson LS series robots are a cost-effective solution for arbitrary pick-and-place and assembly tasks due to their small installation footprint and powerful functions. The LS series is also an ideal alternative to Cartesian robots, with dedicated controls for simple operation ...
|
|
Epson Compact SCARA Robot T6-602S consumes 1.2kVA
Introduction:Epson Compact SCARA Robot T6-602S is easy to use, cost-effective, and reduces the total cost; The controller is built-in, which saves space and is easy to install; Hand I/O, short conduit for easy wiring; Battery-free motor unit, easy to maintain; Wide range of voltage support, ...
|
|
Epson/Epson SCARA Robot G10-651S 10kg
Description: The G10 SCARA robot arm is available in 650 and 850 mm arm lengths with 180 (150 clean) or 420 (390 clean) Z-axis arm lengths; Countertop, sidewall or ceiling mounting options are also available. In addition, it is available in clean/ESD, wash-down and dust-proof models.
...
|
|
EPSON/Epson 6-axis robot C4-A1401 payload 3Kg
Introduction: In terms of robot design and performance, all new technologies are included. The C4 compact 6-axis robot, combined with our power-driven servo technology, produces the high-performance results our customers expect. At the same time, it is matched with the new RC700 controller, and the RC+7.0 software platform, which is suitable for you to ...
|
|
EPSON/EPSON G3 SCARA ROBOT PAYLOAD 1KG
Introduction: The EPSON/Epson G3 Series Robot Arm selector arm is available in lengths ranging from 250, 300, 350mm and 150mm (120 clean) z-axis, and is also available in tabletop, sidewall, and ceiling mount configurations and Clean/ESD configurations for more options.
G Series ...
|
|
Epson S5 Medium Range 6-Axis Robot Fast Cycle High Payload
Introduction: Epson/Epson S5 series 6-axis robot can provide excellent performance and industry-leading PC control. Whether you are looking for a high-speed, low-vibration, high-load, long-arm, or special environment-oriented robot, the Epson S5 model meets your application requirements. The S5 adopts a rigid hand ...
|
|
Epson N2-A450SR 6-axis robot with an arm length of 450mm and a load of 2.5Kg
Introduction: Epson N2-A450SR 6-axis all-in-one robot, controller built-in compact structure, easy to install! The built-in controller reduces installation space requirements and greatly simplifies initial installation and reconfiguration. Wrist hollow design The cable can be passed through the arm hollow structure ...
|
|
Epson GX20-BA04S GX20 SCARA ROBOT
Product introduction:Epson GX20-BA04S GX20 SCARA Robot AC200-240 V Single-phase Electric GX20 series is further upgraded on the basis of the original G20 series high performance, which is used for heavy load handling and batch packing operations, with high speed, high precision and low vibration ...
|
|
The Epson LS3-B SCARA Robot is reliable, versatile and easy to use
Introduction: Epson/Epson LS3-B SCARA robot reliability, versatility, ease of use upgrade, to meet a variety of automation needs.
Features:
Battery-free motor unit
• No need to change ...
|
|
Epson/Epson G1 Mini SCARA Robot 175 | 225
Introduction: EPSON/Epson G1 mini SCARA robot is suitable for high-precision, high-speed, high-performance, low-cost applications. Ideal for hard drive assembly, laboratory automation, electronics assembly, medical device assembly, photonics, semiconductors, communications, solar and other applications...
|
|
EPSON/Epson Robot SCARA G6 Payload 6kg
Introduction: Epson Robot SCARA G6 is used for small parts assembly, with high speed and high precision, **Large handling load of 6kg, optional shaft arm length: 450mm, 550mm or 650mm, available in table, ceiling and sidewall mount models, ISO clean (ISO ...
|
|
Epson SCARA Robot LS10-B60*SC 600mm
Introduction: Epson SCARA Robot LS10-B60*SC has a larger allowable moment of inertia and stronger performance, which is suitable for large end effectors for multi-workpiece handling; battery-free motor unit; There is no need to replace the battery; Reduced downtime; Ethernet wiring port at the top of the J2 joint ...
|
|
Epson SCARA Robot RS3-351S Load Capacity: 1kg
Introduction: Epson SCARA robot RS3-351S has a unique slewing arm mechanism; It can realize ultra-high degrees of freedom of movement; Maximizing productivity in a confined space; The lifting structure and the full slewing arm can grip the workpiece from any direction.
Features:
Performance
...
|
|
The Epson SCARA Robot LS6-B602S-V1 weighs 18kg
Introduction: Epson/Epson SCARA robot LS6-B602S-V1 J2 joint has an Ethernet wiring port at the top of the joint, and a built-in Cat 5e camera network cable is convenient for mobile camera installation; The second axle arm is obliquely outlet, which is more compact and reduces the installation space; Universal I/O interface, more ...
|
|
Epson/Epson Robot C4-A601S 6-axis 4kg compact
Introduction: Epson/Epson 6-axis compact robot C4-A601S is built for maximum flexibility, range of motion and speed. In terms of robot design and performance, all new technologies are included. The C4 compact 6-axis robot combined with our power-driven servo technology produces ...
|
|
EPSON/EPSON N2 SIX-AXIS ROBOT PAYLOAD 2.5KG ARM SPAN 450MM
Introduction: EPSON/Epson N2 six-axis robot has a more compact structure than the C4 robot, and can be set in the same range of 600mm ×600mm working space as manual work. Compared to conventional robots, about 40% of the space is saved.
...
|
|
Epson/Epson SCARA Robot G1-221S weighs 8kg
Introduction: Epson/Epson SCARA Robot G1-221S Industry's Best Mini SCARA; With a body weight of only 8kg, Epson's lightest G series robots; Superior cycle times and accuracy; For precision assembly and press-fit applications, it is compact, highly rigid
...
|
|
Contact
working hours
