Bejiafu information SHOW

	Areas of application for flow sensors – we are blessed Direction and fluid flow velocity sensors are essential for different industrial, medical, and environmental uses. Flow sensors quantify the direction and rate of gas and liquid flow in applications such as density measurement, viscosity measurement, flow pattern determination, and wall shear stress determination. In addition to the flow parameters to the direction, ...
	The right way to choose a torque sensor – we are blessed With the gradual growth of demand for torque sensor shopping malls at that time, in recent years, manufacturers and brands producing torque sensors have shown a rapid upward trend.
	Failure analysis of gas sensors in different situations – we are blessed A gas sensor is a converter that converts the volume fraction of a gas into an electrical signal. When we use gas sensors, we will inevitably encounter some problems, in this regard, we have made the following analysis: 1. Gas sensing ...
	Classification and working methods of photoelectric sensors – we are blessed 1. Slotted photoelectric sensor A light transmitter and a receiver are mounted face to face on either side of a slot is a fork photoelectric. The luminaire announces infrared or visible light, and the light receiver receives the light unobstructed. But when the object to be detected passes through the trough, the light is blocked ...
	How to use photoelectric sensors – we are blessed 1. Optical adjustment The factory setting of the sensor is the maximum range, and this setting is subject to change. Note: Only use your finger to press the button. 2. Set the range (when aborted) Adjust the sensor with a reflector; ...
	Analysis of the use of various types of accelerometers There are two types of accelerometers: one is the angular accelerometer, which is improved from gyroscopes. The other is a linear accelerometer. It can also be divided into single-axis, dual-axis and three-axis accelerometers according to the measurement axis. At the moment, accelerometers are widely used in game controls.
	The difference between optical fiber and photoelectric sensors – we are blessed 1. The definitions are different Photoelectric sensor: A photoelectric sensor is a device that converts optical signals into electrical signals. Its principle of operation is based on the photoelectric effect. The photoelectric effect refers to the phenomenon that when light shines on certain substances, the electrons of the matter absorb the energy of photons and the corresponding electrical effect occurs ...
	No output problems with pressure transmitters – a blessing 1. Assuming that the pressure transmitter and the digital display are used together, and the digital display is not displayed at this time, then the user may say that the pressure transmitter has no output, but in fact, this problem is obvious, and it is unreasonable to hastily determine that the pressure transmitter has no output. Assuming the normal output of the pressure transmitter, ...
	Humidity sensor selection considerations – a blessing If a humidity sensor is used at different temperatures, the effect of temperature drift should also be taken into account in the indication value. As we all know, relative humidity is a function of temperature, and temperature has a significant impact on the relative humidity in a given space. Humidity Sensors ...
	Material classification for displacement sensors – a blessing (1) Conductive plastic displacement sensor Conductive plastic displacement sensor uses a special process to coat the DAP (didipropylphthalate) resistance paste on the insulating body, heat and polymerize to form a resistive film, or press the DAP resistive powder thermoplastic into the groove of the insulating matrix to form a solid body as a resistor.
	What are the types of displacement sensors – Doublebless 1. The displacement sensor is a device that converts the motion displacement of the object into measurable electrical quantities. It is usually used to convert physical quantities such as displacement, orientation, deformation, oscillation, and size that are not convenient for quantitative detection and processing into electrical quantities that are easy to quantitatively detect and facilitate information transmission and processing. ...
	Ultrasonic sensors are easy to install and assemble – we are blessed Ultrasonic sensors are used for the inspection of printed circuit boards (PCBs), where ultrasonic sensors are used to inspect printed circuit boards. So what factors need to be considered when installing and installing ultrasonic sensors? Ultrasonic sensors are capable of being installed and operated in any orientation, ...
	How torque sensors work – we are blessed Like many other types of sensors, torque sensors are measured using strain gauge technology. The sensor is usually a metal elastomer with a strain gauge mounted on it. Strain gauges are firmly attached to the elastomer. If an external load acts on the sensor, the measuring body will ...
	The difference between fiber optic sensors and photoelectric sensors – we are blessed Optical fiber sensor and photoelectric sensor are two typical sensors, which are widely used in production and measurement, so what is the difference between the two? Fiber optic sensor skills are developed on the basis of fiber optics, optical communications, and optoelectronic skills, and electromagnetic...
	Wiring of weighing strain gauge tension and compression sensors – we are in control Wiring method of weighing strain tension and compression sensor: Strain gauge tension and compression load cells can be wired in two different input and output wiring methods: The first is the four-wire connection method. The load cell of the four-wire connection method has no special requirements for the secondary instrument panel, and it is very convenient to use.
	Precautions for the installation of inclination sensors – we are blessed 1. The device mode of inclination sensor is divided into two types: horizontal device and vertical device, but whether it is a horizontal or vertical device, the sensor device surface should be parallel to the face of the measured object when installing, and the influence of dynamic and acceleration should be reduced at the same time. ...
	Load cells with low power consumption and low cost – we are all in good hands Types of load cells: Electrical strain gauge load cells: One widely used principle is the color of a resistive strain gauge (resistance strain gauge), where the resistance is changed to an electrical output, which is then passed through an instrument to measure the mass. Capacitive load cells: low power consumption and low cost. The principle of ...
	The reason why analogue sensors are interfered with – we are blessed 1. The PCB layout board touches the problem, and when the imitation signal is routed, the imitation signal is not wrapped with imitation, and it is even possible that the signal line and then directly go to the power line, which is easy to receive disturbances. Solution: When it is a board, wrap the GND to imitate the signal line. If there is a model ...
	Features of image sensors – a blessing Picture sensor is an extremely useful product, which has gradually attracted the favor of shopping malls with its strong sensitivity and speed. The use of picture sensors in daily life is undoubtedly a digital camera product, and its development speed can be described as changing with each passing day. At...
	Wiring of weighing strain gauge tension and compression sensors – we are in control Strain gauge tension and compression load cells are available in two different input and output wiring methods: The first is the four-wire connection method. The load cell of the four-wire connection method has no special requirements for the secondary instrument panel, and it is very convenient to use, but when the cable is long, it is easy to be shaken by the operating temperature.
	Intake Pressure Sensor Problem Response – Blessing to the Blessing The inlet pressure sensor is abbreviated as MAP. It connects the intake manifold with a vacuum tube, and induces the vacuum change in the intake manifold with the different speed loads of the engine, and then converts the change of internal resistance from the sensor into a voltage signal, which is used by the ECU computer to correct the fuel injection amount and ignition timing angle. Other words...