Fisher/Fisher 912 Series Pressure Reducing Regulators

The 44-1300 Series is a high-pressure, high-flow pressure reducing valve that offers both bleed and balanced spool designs. The 44-1300 series is available with Cv = 0.8 and 2.0. Chamber-loaded and pneumatically compressed load models are available. Ideal for commercial diving, breathing air, special gas mixture regulation, rigid kit diving...

The Fisher C1 controller and transmitter continues the tradition of durable and reliable manometry equipment when it comes to solving air/gas consumption problems. The C1 meets the needs of durable and reliable pressure measurement equipment. specification Certified ATEX, CUTR Input signal pneumatic Maximum outlet pressure 40 p ...

Description: Fisher/Fisher's CSB400 series of direct-acting reed regulators can meet a wide range of pressure reduction applications in commercial and light industrial facilities. The flexibility is due to the fact that the regulator offers a wide range of body sizes and end connections, outlet pressures, and ...

Fisher CAV III Micro-Flat trims are designed for cleaning, cavitation, and low flow applications with a maximum pressure drop of 241 bar (3500 psi). This product is a combination of two different products: cavitation control with Cavitrol III trims and Micro-Flat ...

　Introduction: The Fisher/Fisher Model R222H is a one-stage regulator that offers 65% higher flow and 40% smaller volume than standard compact regulators for use in underground tanks or airchambers where space is limited. Approved by Underwriters Laboratories (UL) (United States Safety Testing Laboratories Inc. ...

The Series 912 direct-acting, spring-loaded regulators are United States Safety Testing Laboratories Corporation (UL) certified regulators for use in a variety of applications and industrial applications. The valve membrane of these regulators has some internal pressure relief to help minimize overpressure. peculiarity ...

The Fisher 3024C actuator is a compact, spring-balanced, pneumatic diaphragm actuator. It is a cast-type fork mounted for universal actuation of ball valves. This actuator can be used according to the pneumatic conveying of different controllers or valve positioners in the actuator diaphragm.

The Model 1098-EGR regulator provides economical and sophisticated pressure control for a wide range of applications, including: natural gas systems; fuel gas supply for industrial boilers, gas supply for furnaces and rubber mixers; and applications in commercial or industrial enterprises such as rolling mills, asphalt manufacturing plants, etc. This...

Introduction: The Fisher/Fisher Vee-Ball™ V200 control valve has a hemispherical construction valve with a specially designed corrugated V-notch. The Vee-Ball Control Valve combines the ruggedness of a linear valve with the high efficiency of a rotary valve, with a V-notch ball core and a spherical seal ...

Fisher's Model 1098-EGR and 1098H-EGR regulators provide economical and precise pressure control in a variety of applications, such as natural gas distribution systems; gaseous fuel supply for industrial boilers, furnaces, ovens and mixers; as well as large commercial/industrial establishments (e.g. shopping malls and schools).

The Fisher 4660 pneumatic pilot-operated pressure controller activates a safe shutdown system for flowlines, production vessels, and compressors. The pilot is available in single or dual setpoint capability models that use a switching point to maintain full output pressure when the process pressure is within the set point range. If the process ...

The Model ACE95 is a pilot-acting steam storage tank seal valve for precise pressure control in low-pressure sealing systems. Constructed of stainless steel, the unit is actuated by a large diaphragm actuator that accurately controls the seal pressure with a single adjustment bolt. peculiarity Fully balanced and non-motorized ...

Y602 Series ventilation assemblies help prevent vent obstruction and ensure proper air or gas flow in regulator spring housings, remote ventilation ducts, actuator membrane housings, and other applications. These ventilation components are available in angled or straight-through versions. In general, angular ventilation components protect the side ...

The Fisher Model SR5 Regulator is a compact, high-flow, self-acting pressure reducer. It is designed for applications where hygienic design is extremely important, such as in the pharmaceutical, biotechnology or food and beverage industries. The unit is available in body sizes NPS 1/2 to 3 / DN 15 to 80 as well as ...

Introduction: Fisher/Fisher FB welded angle valves control compressible fluids and can be used in special applications that require maximum noise reduction and high flow capacity. Typical applications include main steam pressure reducing valves and compressor bypass valves. FB valves are also commonly used in petrochemical and natural gas processing plants for acidic ...

The EZH (Spring Closed) and EZHSO (Spring Open) series regulators are precision-piloted, pressure-balanced soft-seat regulators. These regulators are used for high-pressure natural gas transmission/city gate stations, high-flow distribution systems, and power plant gas supply. They have the ability to run smoothly and ...

The Fisher DFA (Flexible Desuperheater) includes a water control element and a stand-alone desuperheater (with adjustable nozzles and mechanical atomization) for medium to high flow variation applications. The DFA is mounted to the NPS 8 or larger pipe end via a flange connection. specification Certified PED, C...

The Fisher DVI desuperheater is injected with a water jet at the venturi outlet section to ensure thorough mixing as well as rapid atomization. DVI desuperheaters can be easily installed between flanges in steam pipes from DN25 to DN600 (1 to 24 inches). No moving parts, water fill mode for fast, ...

Electric-pneumatic positioners Electric-pneumatic positioners are conventional pneumatic positioners with an additional integrated electric-pneumatic converter. The converter receives the DC analog input signal from the control system and converts it into the corresponding pneumatic signal, which is then sent to the conventional positioner. Almost every ...

Introduction: The Fisher/Fisher DSA steam conditioning desuperheater uses high-pressure steam to rapidly and thoroughly atomize water jets in a low-flow steam line. The desuperheater is flanged to a pipe with DN 200 (NPS 8) or larger. This desuperheater is suitable for applications that require a high turndown ratio. ...