ifm sensors have a lot of precautions at the time of installation, and it is necessary to pay attention to the orientation of the device, if the device orientation is not suitable, it will also form damage to the pressure sensor.
ifm sensors require the scale of the device hole at the time of the installation. If the size of the device hole is not suitable, it will affect the sealing performance of the pressure sensor in the process of installation, so that the sensor can not play a full role, which is mainly because the device hole is not suitable to form the threaded part of the equipment is worn. If this situation is present at the time of use, it is necessary to make appropriate adjustments, and the device hole can be detected by the device hole measuring instrument, and the appropriate device hole can be selected, so as to prevent the wear of the thread.
In order to prevent the oscillation film of the ifm sensor from being damaged by an impact if it is installed in an irregularly shaped and too small hole, we are able to select the appropriate device torque for the excellent sealing of the sensor. However, it should be noted that we need to apply the anti-detachment compound on the thread part before the sensor device, which is conducive to preventing the falling off caused by excessive torque. At the same time, we can also find suitable things to process the device hole, which is conducive to controlling the scale of the device hole and preventing sensor damage caused by unsuitable device holes.
The above is the need to pay attention to the condition of the device hole when using ifm sensors. When you install it in the later stage, you should choose the appropriate device hole, so that it can give full play to its outstanding performance.
|
More on that
|
Torque sensors in industrial manufacturing – ifm
Torque sensor is a component that must be installed in some industrial products, mainly used to measure speed and viewpoint orientation, but different types of sensors have different ways to use and function, what is the classification of torque sensor?
Resistance strain ...
|
|
The function and purpose of ifm pressure sensors
Pressure sensors are one of the more common sensors. Conventional pressure sensors are primarily mechanical devices, and the deformation of elastic parts indicates pressure. However, due to their size and weight, they are unable to generate electricity. The development of semiconductor skills has also led to the emergence of semiconductor pressure sensors.
|
|
Considerations for the selection of load cells – ifm
1. Sensor scale:
(1) In normal use (static test or quasi-static test, the frequency of use is not high), the scale of the sensor should be selected to consider the force value of the measurement, but also to consider the weight of the auxiliary tool (test fixture) and so on.
|
|
Common faults in eddy-current sensors – ifm
The eddy-current displacement sensor is a commonly used measuring instrument, which can accurately measure the static and dynamic relative displacement changes between the measured body (if necessary, a metal conductor) and the end face of the probe, and has the advantages of flexible use, stable function, high reliability and simple protection.
...
|
|
Sensors in the mass flow controller – ifm
The mass flow manipulator is a new type of flow measurement and monitoring instrument, as well as an instrument that can conveniently monitor the activity of different gases in the pipeline without temperature and pressure compensation. Its working principle is to send the flow signal measured by the heating bridge of the sensor to the amplifier for amplification, and the enlarged ...
|
|
Essentials for the selection of ifm controllers
1. The ifm controller has a control function
Another important reference feature for the purchase of ifm controllers is the ability to control movements and other applications. Fulfillment of these functional requirements requires I/O, as well as a strong processor and the ability to prioritize missions.
Programmable Drum Switches (PDS...
|
|
The LMT series of ifm level sensors
The liquid level sensor launched by ifm electronics - LMT series sanitary liquid level sensor, this series of sensors is made of high-grade stainless steel 316L material shell, compact structure, can reach IP68/69K protection level, reliable and stable function, can be thoroughly used in sanitary areas, suitable for food ...
|
|
The structure of the sensitive core of the accelerometer
Accelerometers are the most important element in engineering vibration measurement. In the test system, the sensor is the first link of data acquisition and profiling, so the selection and correct use of the sensor will directly affect the quality and accuracy of the measured signal. Although people working on engineering vibration know that this ...
|
|
Six-wire and four-wire wiring of load cells
Because the load cell has the advantages of high measurement accuracy, good temperature characteristics, and stable operation, it is widely used in the dynamic and static measurement of various structures and the primary appearance of various electronic scales.
The load cell can be selected with two different input and output wiring methods: one is ...
|
|
ifm sensor function
The primary function of a sensor is to detect and measure physical quantities or phenomena in the environment and convert them into usable electrical signals or other means of output signals. The functions of sensors can be summarized in the following aspects:
1. Detection: ...
|
|
Structural classification of UV sensors
1. Spherical cathode structure:
In order to fully avoid the tip effect and make the photoelectron emission more stable and uniform, it is necessary to fix the operating area on the cathode, because the ultraviolet tube relies on photoelectron emission and gas multiplication to complete the conversion of the optical signal into an electrical signal and amplify it.
|
|
The difference between a fiber optic sensor and a photoelectric sensor – ifm
The first point is that photoelectric sensors and fiber optic sensors work differently
First of all, from the principle of operation of the two, first of all, the photoelectric sensor is operated according to the principle of the photoelectric effect, that is to say, when the light hits the photoelectric sensor made of semiconductors, the light will be announced.
|
|
Failure analysis and definition of ifm vortex flowmeters
Vortex flowmeter series instrument because of the use of the environment is special or harsh in the field work sometimes present such and such problems, resulting in production will be affected, vortex flowmeter and orifice flowmeter and V-cone flowmeter are different, as far as the orifice flowmeter is concerned, it is the standard orifice plate and multi-parameter ...
|
|
Presentation of the performance of the S-type load cell – ifm
1. S-type load cells are moderately priced and suitable for mass production - good sensor consistency is required, suitable for automated batch production, and high requirements for processing equipment to eliminate inconsistencies and faults formed by manual operation.
2 ...
|
|
High-frequency pressure sensor output signal – ifm
The conversion of the pressure to the electrical signal is done by the physical deformation of the strain gauge, and the strain gauge is bonded to the diaphragm of the pressure sensor and wired into a Wheatstone bridge structure. The pressure exerted on a high-frequency pressure sensor causes the diaphragm to flex, which causes the strain gauge to strain. Strain will occur ...
|
|
Position feedback for valve actuators – ifm
Two directions are detected with one sensor
The valve sensor consists of two inductive proximity switches overlapping in the same housing. Depending on the direction of the cam, the upper or lower sensor triggers.
Merit:
...
|
|
Selection and testing of ifm proximity switches
1. Proximity switch selection
Different types of proximity switches should be selected for different raw material detectors and different detection intervals to have a high-performance price ratio in the system, for which the following principles should be followed in the selection:
1. When the detector body is metal material, the high-frequency oscillation type should be selected.
|
|
The principle of temperature sensors – ifm
Temperature sensor definition
A temperature sensor is a sensor that senses temperature and converts it into a usable output signal. Temperature sensors are the core part of the temperature measurement appearance, and there are many varieties. The temperature sensor is very accurate in measuring the ambient temperature, and is widely used in agriculture, industry, ...
|
|
ifm sensors detect objects contactlessly
Capacitive ifm sensors have many applications in everyday life. It is capable of inspecting non-metallic materials as well as non-touch methods to detect objects. The editor below explains how the sensor works.
Capacitive ifm sensors ...
|
|
Failure analysis of the ifm pressure sensor PN2071
1. ifm sensor PN2071 pressure up, sensor output can not go up in this case, first should check whether the pressure interface is leaking or blocked, if you admit that it is not, check the wiring method and check the power supply, if the power supply is normal, then simply pressurize to see if the output changes, maybe observe ...
|
|
Contact
working hours
