Considerations for the selection of load cells – ifm

Optical fiber sensors and photoelectric sensors are two typical sensors, which are widely used in production and measurement, so what is the difference between the two? Next, we will analyze the differences between the two from the perspective of principle and use. ...

1. After the wireless sensor device is installed, it appears to be beating or the number is inaccurate Reason: There is electromagnetic interference on the site, or the signal line and the power line go to the same trunking. Solution: The product function selected by the customer does not meet the on-site working conditions, and it needs to be installed or replaced.

1. Resistance strain gauge The resistance strain gauge is a resistance wire mechanically distributed on a substrate made of organic materials, that is, it becomes a strain gauge. An important parameter for him is the sensitivity coefficient K. When his ends are subjected to the F force, they will elongate, that is, they will be deformed. ...

The differential pressure transmitter is a transmitter that measures the pressure difference between the two ends of the transmitter, and outputs a standard signal (such as 4-20mA, 1-5V). The difference between the differential pressure transmitter and the general pressure transmitter is that they have 2 pressure interfaces, and the differential pressure transmitter is generally divided into positive pressure end and negative pressure end.

Modern sensors are very different in principle and structure, how to reasonably select sensors according to the detailed measurement intention, measurement objectives and measurement environment, is the first problem to deal with when carrying out a certain quantity measurement. When the sensor is confirmed, the corresponding measurement method ...

1. If the pressure transmitter is used in cooperation with the digital display, if the digital display does not appear at this time, then the user may say that the pressure transmitter has no output, but in fact, this problem is obvious, and it is unreasonable to hastily determine that the pressure transmitter has no output. If the pressure transmitter is working properly, ...

The pressure sensor is an instrument that can accept pressure signals, and it is widely used in railway transportation, intelligent buildings and other occupations. First, prevent solder slag from ...

1. S-type load cells are moderately priced and suitable for mass production - good sensor consistency is required, suitable for automated batch production, and high requirements for processing equipment to eliminate inconsistencies and faults formed by manual operation. 2、 ...

ifm flow sensor solutions. IFM Flow Sensor SV5200, Vortex Flow Sensor with User Friendly Display, Circuit Connection Can Be Rotated for Optimal Arrangement, With Switching Output or Frequency Output, and IO-Link for Reliable Flow Detection ...

Spindle speed detection In order to prevent damage to wind turbines due to overspeeding, the rotational speed is detected using inductive sensors and evaluated by safety-related speed monitors. ifm IFS24X series inductive sensors with M12 ...

Selection of sensitivity In general, within the linear scale of the sensor, the higher the sensitivity of the sensor, the better. Because as long as the sensitivity is high, the value of the output signal corresponding to the measured change is relatively large, which is conducive to the signal processing.

Vortex flowmeter series instrument because of the use of the environment is special or harsh in the field work sometimes present such and such problems, resulting in production will be affected, vortex flowmeter and orifice flowmeter and V-cone flowmeter are different, as far as the orifice flowmeter is concerned, it is the standard orifice plate and multi-parameter ...

The magnetic switch is different from our common switching devices, it is also called a magnetic switch, which is a line switching device that uses magnetic field signals to control. Perhaps many people will be interested in this new type of switch, so let's make a detailed explanation of the operating principle of the magnetic switch. ...

1. Oxygen sensor poisoning. Oxygen sensor poisoning is a common and difficult problem to prevent, especially in cars that often use leaded gasoline, and even new oxygen sensors can only operate for a few thousand kilometers. If it's just a subtle case of lead poisoning, then use a box of lead-free ...

1. Transfer heat pipes for heat dissipation. Dynamic torque sensors can be used in the production of viscometers, electric (pneumatic, hydraulic) torque wrenches, it has high precision, fast frequency response, good reliability, long life and other advantages. Installation steps: 1. According to the connection mode of the shaft and the dynamic torsion...

IFM sensor is a sensor with optoelectronic devices as the conversion element, which can be used to detect non-electric amounts that directly cause changes in light quantity, such as light intensity, illuminance, radiation temperature measurement, gas composition analysis, etc.; It can also be used to detect other non-electric charges that can be converted into changes in the amount of light, such as part diameter, surface ...

On November 18, 2008, the 19th Multinational Instrumentation Conference and Exhibition was held in Beijing International Exhibition Center, at the exhibition, as one of the world's leading manufacturers of electronic sensors in the field of industrial automation, Germany ifm electronics showed its advanced sensors and their corresponding ...

The depth of the internal thread of the installation with the sensor should be greater than the length of the external thread of the sensor itself, so as to avoid the sensitive diaphragm of the sensor pushing to the bottom of the internal thread, so that the sensor is affected by stress. If the size of the internal thread has been ...

1. The appearance is installed outdoors, and it is recommended to install a sunshade to prolong the service life of the appearance. 2. Wire and cable protection pipes should be sealed to avoid water accumulation. 3. Although the appearance itself is equipped with lightning protection equipment, when the appearance is used in the multi-lightning area, it is advocated to distinguish the inlet and outlet lines on the surface.

Generally, the damage of the high-temperature melt pressure sensor is caused by the improper orientation of the device, if the sensor is forcibly installed in a hole that is too small or an irregularly shaped hole, it may cause the vibration film of the sensor to be damaged by impact, choose the appropriate thing to process the device hole, ...