Can Kunlun Tongtai touch screen run in the computer embedded version?

The main features of the MCGS embedded configuration software 1. Simple and flexible visual operation interface: using full Chinese and visual development interface, in line with the usage habits and requirements of Chinese. 2. Strong real-time performance and good parallel processing performance: it is a real 32-bit system...

1) Check whether the connection of the touch screen is right, and whether one of the wires connected to the keyboard port of the host (take the working voltage of 5 volts touch screen from the keyboard port) is connected, please check the connection. 2) Observe the situation of the touch screen control box light, if it is not lit or the red light is on, it means that the control box is broken, please change it.

The most far-reaching technological change in touchscreen performance is the shift from resistive to capacitive touchscreen technology. According to iSuppli, a market research agency, nearly 25% of touchscreen mobile phones will be transferred from resistive to capacitive touchscreens by 2011. Capacitive touch screen technology brings ...

1. Failure regarding touch deviation If it is the position touched by the finger that does not coincide with the mouse arrow. Then you should install the driver and correct the position without touching the bullseye vertically. and re-correct the position. If some areas are touched accurately, some areas ...

First of all, let's take a look at the interface settings of the Kunlun Tongtai touch screen. 1. Click on the device window to enter the Add PLC 2. First add a TCP parent serial port, and add a 5U device below 3. Double-click the TCP parent device to learn the settings, and enter the IP of the touch screen itself...

20. The TPC project running environment is automatically restarted If the CPU usage reaches 99% during the project runtime, the runtime environment will automatically exit and then restart. There may be many reasons for high CPU usage: too many bitmaps, too many scripts in the loop policy, and short cycle times. ...

1. Check the wiring port: first check whether the wiring interface is loose, and then check whether there is a conflict between the serial port and the interrupt number, if there is a conflict, the resources should be adjusted to avoid the conflict. Then check whether there are cracks on the surface of the industrial touch screen, and replace them in time if there are cracks. It is also necessary to check the touch screen ...

1. Surface acoustic wave screen The three corners of the acoustic screen are pasted with transducers that transmit and receive sound waves in the X and Y directions respectively (transducers: made of special ceramic materials, divided into transmitting transducers and receiving transducers. It is to convert the electrical signal sent by the controller through the touch screen cable into sound.

56. Does TPC support OPC communication? No, the network version supports OPC communication. 57. 200PLCLC communication wiring with TPC7062K (1) The 7 positive and 8 negative of the TPC RS485 interface is connected with the positive and 8 negative of the PLC serial port 3, and the wiring diagram is as follows: TPC PLC 58. 200 ...

96. How to check the status of the PC connection to the TPC network? Connect the PC to TPC with a network swap cable, click "Start-Run" on the PC, enter CMD enter in the run bar, and then enter the ping IP address in the DOS interface.

Fault 1: Touch deviation Phenomenon: The position of the finger does not coincide with the mouse arrow. Analysis: After installing the driver, there was no vertical touch to the bullseye center position when correcting the position. Solution: Recalibrate the position. Fault 2: Touch ...

44. Clear the configuration engineering password flow (1) Record customer information: including the name of the unit, the name of the customer, the contact number, ask the customer for the configuration project and require the customer to provide the certificate with the official seal and the purchase channel; Attestation File Format: Our company is XXX, ...

Analysis and treatment method of touch all-in-one screen fault Fault 1: Touch deviation phenomenon: The position touched by the finger does not coincide with the mouse arrow. Analysis: After installing the driver, there was no vertical touch to the bullseye center position when correcting the position. Place...

1. Tap the settings icon in the top right corner of the screen to enter the settings menu. 2. Find the "Time Settings" option in the menu and click to enter. 3. On the time settings screen, you can manually modify the current date and time. There is also the option to automatically get the time so that the device ...

Problems with the Internet version 1. How to calculate the number of points of MCGS configuration software In the real-time database, except for the 4 internal variables of the system, all the added variables are counted as points of the software, and you can click "Tools - Use Count Check" to view the MCGS points information. 2. Net ...

1. How to check the communication status of the device in MVGS Among all non-board devices (except for some customized devices) of MCGS, *** channels are communication channels. That is, after entering the runtime environment, after the device driver starts working, the ...

1 Feature Overview There are two kinds of data saved by MCGS TPC, one is the internal variable data in the MCGS software, and the other is the data obtained from the lower computer device. 2 Functional Points [1] ...

One. Kunlun Tongtai touch screen touch calibration: 1) When the TPC Kunlun touch screen is powered on and started, when the progress bar appears, click the touch screen, and the [Startup Properties] dialog box will pop up, and wait for 30 seconds to automatically enter the touch calibration interface; 2) According to the prompts of the [Touch Screen Calibration] program ...

Open Kunlun Tongtai touch screen software, create a new [Window 0], and click to open. Find the Bitmap icon in the toolbox and click to open it. After creating a bitmap in Window 0, right-click and select Load Bitmap. Open the text where the image is saved ...

Four-wire touch screen The four-wire touchscreen contains two resistive layers. One of the layers has a vertical bus on the left and right edges of the screen, and the other layer has a horizontal bus at the bottom and top of the screen, see Figure 1. In order to measure in the X-axis direction, the left side of the bus is offset to 0V, and the right side ...