Kunlun Tongtai touch screen - touch all-in-one screen fault analysis and treatment method

The five-wire resistive touch panel is composed of two layers: (1) ITO Glass: A piece of glass or plexiglass is used as the substrate, and the surface is coated with a transparent conductive layer. (2) ITO polyester plastic layer (ITO Film): The surface is hardened to make the surface smooth and ...

1. Check whether the power supply of the host is working normally. First, check whether the host system is powered by checking whether the power indicator on the host chassis panel is on and whether the power supply fan is rotating. Secondly, use a multimeter to check whether the external voltage meets the requirements, the voltage is too high or too ...

1. The optical performance is the best. The clarity and light transmittance are the highest, the reflection is the least, and there is no color distortion, this is because the sound wave screen body is pure glass, unlike the resistive screen with multiple layers of composite film; The capacitive screen is coated with a layer of film on the surface, and the light transmittance is worse. 2. Anti-scratch and anti-barbaric use ...

First of all, let's take a look at the interface settings of the Kunlun Tongtai touch screen. 1. Click on the device window to enter the Add PLC 2. First add a TCP parent serial port, and add a 5U device below 3. Double-click the TCP parent device to learn the settings, and enter the IP of the touch screen itself...

1. Prepare a USB flash drive of 8GB or less. Insert the USB port behind the touch screen, restart the touch screen, and quickly tap the progress bar when the process progress bar appears on the touch screen screen. 2. Click "System Maintenance". 3. Click Back up System Information. 4. Make sure the display path is us...

1. Click the "Settings" button on the MCGS interface to enter the settings interface. 2. Click on the "Alarm Answer" tab. 3. In the Alarm Response tab, check the Enable Alarm Response box, and set the Answer Time, Trigger Alarm Time Range, Response Time, Response Time, Alarm Response, Alarm Response, Alarm Response, Alarm Response, Alarm Response, Alarm Response,

merit Capacitive touch screens only need to be touched, and no pressure is required to generate a signal. Capacitive touch screens require only one or no correction after production, while resistive technology requires conventional correction. The life of the capacitive solution is longer, because the capacitive touch screen ...

1 Resistive touch screen - Not afraid of water and dirt - It has the cost advantage of small size, which is suitable for industrial control products and personal portable products - Fear of scratches, low light transmittance, low temperature dullness 2. Surface acoustic touch screen - New and easy to use, suitable for short-term products ...

91. How to update the TPC splash screen After the project is downloaded and the communication test is successful, click "Advanced Operation", in the advanced operation dialog box, select the corresponding file to replace the startup screen, and then click the "Change Startup Screen" button. Note: The splash screen is set ...

The first method: use a U disk to make the designed interface into a U disk function package, and then plug it into the touch screen, the touch screen will automatically detect and update it according to the prompts. The second method: use a special download cable for the touch screen, download the program, and it will automatically overwrite the original environment. ...

1. Offline programming mode: the programmable logic controller and the programmer share a CPU, and when the programmer is in programming mode, the CPU only provides services for the programmer and does not control the field equipment. After completing the programming, the programmer switches to the running mode, and the CPU controls the field device.

Inaccurate screen position: Repositioning can be done via driver software. Touch position and screen cursor upside down: When installing the touch screen, the position of the screen is reversed, please adjust the touch screen position according to the principle of right-hand position out. The touchscreen display icon keeps pointing towards the fixed ...

1. TPC1262HI common fault phenomenon of Kunlun Tongtai touch screen (1) Black screen, blurred screen, white screen (2) Caused by the aging of the LCD screen, the high voltage is low, and the lamp is aging (3) The LCD screen has no display, and the brightness is not clear (4) LCD screen display vertical bar, display horizontal bar ...

1. Embedded touch screen structure At present, the touch screen basically adopts an external structure, and the display module and the touch module of this structure are two relatively independent devices, and then the two devices are integrated through the back-end lamination process, but this relatively independent external structure will affect the ...

1. High degree of stability, will not drift due to changes in time and environment 2. Highly adaptable, not subject to current, voltage and static interference, suitable for some harsh environmental conditions (explosion-proof, dust-proof) 3. High light transmittance, no intermediate medium, up to 100% 4. ...

Problem Description: Why can't Kunlun touch screen TPC1061Ti communicate directly with S7-300MPI? Solution(s): 1. According to the Kunlun Tongtai and Siemens 300MPI direct connection sample, the communication status is 1, ask customer service, check line 3 8 PLC --7 8 ...

1. Compared with the four-line touch screen, the five-line touch screen has a longer service life and can withstand more than 30 million clicks. The lifespan of a four-wire resistive touch screen is 3 to 4 years, while the average of a five-wire resistive screen can reach 6 years. 2. Once the industrial display of the four-wire touch screen is touched...

1. The touch screen is not allowed to be repaired If it is the position touched by the finger that does not coincide with the mouse arrow. Then you should install the driver and correct the position without touching the bullseye vertically. and re-correct the position. If you touch some areas accurately ...

1. The capacitive touch screen only needs to touch, and no pressure is needed to generate a signal. 2. Capacitive touch screen only needs to be corrected once or not at all after production, while resistive technology requires conventional correction. 3. The life of the capacitive solution will be longer, because the part in the capacitive touch screen ...

In order to improve the anti-interference ability of the PLC system, we should start from the design. In the anti-interference design of specific projects, products with strong anti-interference ability can be selected to improve the anti-interference of equipment and systems by suppressing interference sources, cutting off or attenuating the transmission path of electromagnetic interference, and using software means.