With the popularization of industrial robots in the production site, more and more Mitsubishi collaborative robots, Mitsubishi robots, MELFA ASSISTA, RV-5AS-D on-site issues need to be solved urgently, such as the need for more robot programming engineers, adding labor costs; Teaching is messy, adding a lot of non-production time; setting up guardrails, adding space, and installation costs; The connection and setting of the robot and the peripheral equipment are messy, and the device and protection time are added; In addition, it is necessary to ensure a safe distance between the robot and the workers at the production site.
On May 20, 2020, Mitsubishi Electric simultaneously announced a new product, the collaborative robot MELFA ASSISTA, in Japan and China, which perfectly addresses many traditional robot application field issues. The new cobot arm is equipped with a dedicated operation button and an operating status display LED, and is equipped with programming software (RT VisualBox) that makes it easy to import and debug the robot, further improving the production power at the production site and reducing the total cost of ownership (TCO) at the production site, thereby contributing to the new problem of maintaining a safe distance between the robot and the operator at the production site.
Assist+A=Assista
Anyone is so simple that anyone can easily use it
Anytime is instantaneous, and the automation is perfect
Anywhere can be equipped with mobile devices such as AGVs without space limitations
Advantage 1: Programming is simpler
The newly developed programming thing RT VisualBox can use block diagrams to easily create a program of the robot system through simple and intuitive operation, making the setup and debugging of this robot easier.
Connecting with peripherals such as robot grippers and cameras is easier to set up, and proven peripherals such as robot grippers and cameras can be connected and set up more easily with RT VisualBox. The number and scale of partners is growing.
Reduction of man-hours for program development, planning, and system protection.
Advantage 2: Dedicated teaching operation button
The dedicated operation button mounted on the robot arm completes the teaching of the robot (recording and reproducing the action), and the teaching pendant is no longer required.
The number of operations required for teaching work is reduced to a minimum, and even unskilled workers can easily complete the setup in a short time.
Advantage 3: LED light display status
The LED light mounted on the robot arm shows the operating status. Workers around the robot can grasp the condition of the robot at a glance and create a safe collaborative work environment.
There is no longer a need for special peripherals to show the operation status of the robot.
MELFA ASSISTA, A SMART PRODUCTION CENTER DEVICE
Mitsubishi Electric's new collaborative robot MELFA ASSISTA complies with the global standard ISO 10218-1 General Safety Requirements for Industrial Robots (Part 1) and the ISO/TS 15066 skill standard for collaborative robots. In addition, a collaborative robot using NSF H1 certified grease for food machinery has been added. In line with the world standards ISO 10218-1 and ISO/TS 15066, it is possible to build a system that eliminates the need for robot safety guardrails based on the customer's risk assessment, saving space.
MELFA ASSISTA fully considers the on-site application in the planning, which facilitates better cooperation between the on-site operators and robots around the robot, safely and effectively improves the production power, reduces TCO, and builds an automated and intelligent production unit centered on industrial robots, so as to help customers complete the comprehensive value improvement.
|
More on that
|
Introduction to Mitsubishi PLCFX3U positioning control
1. The workbench runs in the direction of the decrease of the value of the current value register (generally M8342=OFF in the opposite direction), and when it encounters the near-point signal, it becomes a creeping speed, and the zero-point signal after leaving the near-point signal arrives with a delay of 1ms, and the pulse output is immediately aborted.
...
|
|
Mitsubishi inverter pre-use debugging method
1. No-load energizing test of Mitsubishi inverter.
1. Ground the ground terminal of the Mitsubishi inverter.
2 Connect the power input terminal of the Mitsubishi inverter to the power supply through the leakage maintenance switch.
3 Check whether the factory display window of the Mitsubishi inverter is normal, if it is not correct.
|
|
Mitsubishi Electric CNC numerical control system grounding specification
What is the effect of machine tool grounding?
1. Insist that the machine shell and the ground insist on the same voltage.
2. In the event of abnormal external voltage or leakage, the maintenance personnel and the machine tool will not be damaged electrically.
3. Avoid damage to CNC equipment caused by external voltages such as surges.
4. ...
|
|
Mitsubishi PLC's six programming languages
(1) Ladder diagram
Programming language is traditionally called a ladder diagram. The ladder diagram follows the method of relay control circuit, and it can also be said that the ladder programming language is simplified from the symbol evolution on the basis of the logic control of relays and contactors commonly used in electrical control systems.
|
|
Capacitive action in Mitsubishi inverters
Capacitor is a kind of energy storage element, with the characteristics of "straight through AC, low frequency through high frequency", people in order to know and identify the capacitor in different circuits, according to its effect in the line and give it many titles, the following introduces the meaning of some commonly used titles.
...
|
|
A brief description of Mitsubishi's PLC network structure
1. The equipment layer/fieldbus CC-Link equipment layer is a field network that connects PLC and other control equipment, sensors and drive equipment, which is the lowest layer of the entire network system. CC-Link fieldbus connection is selected, the number of wiring is greatly reduced, and the maintainability of the system is improved. Whereas...
|
|
Modbus communication and address assignment for Mitsubishi PLC
When using Modbus communication in Mitsubishi PLCs, it is necessary to understand the address allocation of different register types.
The following are the common types of Mitsubishi PLC Modbus addresses and their corresponding functions:
1. Coil Register:
...
|
|
Mitsubishi servo motor is now commonly used
1. Torque control: Torque control is based on external simulation imitation type or direct address assignment to set the output torque of the motor shaft. For example, 10V matches 5Nm. When the external simulation simulation is set to 5V, the output of the motor shaft is 2.5Nm. Assuming that the load on the motor shaft is less than 2.5Nm, then ...
|
|
Mitsubishi origin regression method
1. Data setting type
This method is to set the current bearing as the origin. Therefore, at this time, no matter which direction the servo motor stops at, only the data setting type origin return is required, and now this direction is the origin direction. So, the origin regression operation under this method, ...
|
|
Preparation steps for the installation of PLC - Mitsubishi
Installation and commissioning of the system
Reasonable arrangement of system installation and commissioning procedures is the key to ensure that the installation and commissioning mission is completed efficiently and with high quality.
1. Preliminary skill preparation
The more abundant the skills to prepare for the commissioning of the system device, the smoother the installation and commissioning will be. Former...
|
|
Mitsubishi inverter FR-A800 series selection
Q: When will the CS84 series inverter be selected?
A: CS80 series inverter belongs to the diversified function of small intelligent inverter, covering excitation control and general flux vector control, the volume is 57% of the same model, very fast, in some general functions can be used in this model ...
|
|
Mitsubishi inverter basic questions and answers
1. Question: What is the type of RS485 to RS232C converter used by Mitsubishi inverter for communication?
Solution: FA-T-RS40* Mitsubishi inverter is available.
2. Question: Mitsubishi inverter frequency external potentiometer is given, and the external potential recommended to be used ...
|
|
The GOT widescreen family has been expanded with the GT2512
When industrial automation enters the era of artificial intelligence. Human-computer interaction has long surpassed the simple control of machines, and has been upgraded to obtain more information, use more functions and new skills for more accurate and efficient control, and complete the intelligent manufacturing promotion of industrial automation.
...
|
|
Mitsubishi inverter fault visual inspection method
The intuitive method refers to the search and analysis of faults based on the external manifestations of Mitsubishi inverter defects without any instruments. The visual method includes an unpowered view and a power-on survey. In the overhaul, the first thing to do is to check without power, that is, to use the human sensory organs (eyes, ears, hands, nose) to check the relevant plug-in.
|
|
Precautions related to transportation control of lithium batteries - Mitsubishi
This Skills Brief introduces the United Nations requirements for lithium battery shipment controls and United States guidelines for lithium battery shipment controls.
In addition, the content shown in this skill newsletter will be discontinued as of March 2020.
...
|
|
Mitsubishi servo problems and how to troubleshoot them
1、AL. E6 - indicates servo emergency abort. There are generally two reasons for this shortcoming, one is that the 24V power supply of the control circuit is not connected, and the other is that there is no connection between the EMG and SG of the CN1 port.
2. AL.37 - parameter abnormality. The internal parameters are chaotic, and the operator may set the parameters by mistake or drive ...
|
|
The Mitsubishi PLC FX2N is connected to a computer through the group Taiwang
In the PLC control system, the content that needs to be displayed mainly includes timer value, counter value and data register value, and the data display method can be summarized into two fundamental types: one is based on the PLC data communication interface, such as RS-232, RS-485/422, and the display device also has such an interface.
|
|
PLC Processor Performance Test – Mitsubishi
The processor performance test should be carried out in accordance with the requirements of the system manual, to ensure that the system has the function described in the manual, and is stable and reliable, including the system communication, backup battery and other special modules to view. Redundancy testing is necessary for systems with redundant equipment. i.e. the redundant design ...
|
|
The Mitsubishi iQ-F series is compatible with CC-Link IE TSN motion modules
The new iQ-F motion module is a controller that can perform advanced motion control such as positioning, synchronization, cam, speed, torque, etc., with a computing cycle of 500μs, and can be connected to a high-function servo amplifier through CC-Link IE TSN, making a higher contribution to the miniaturization and high functionality of the equipment.
...
|
|
AD PLC realizes the two basic points of control - Mitsubishi
PLC is based on electronic computers, but it is not the same as ordinary computers. Generally speaking, computers only consider the information itself when translating input and output information. As long as the human-machine interface is good, the input and output of information can be completed. And the PLC should also consider the information in and out ...
|
|
Contact
working hours
