The measurement properties of our sensors

The pulse encoder is a rotary encoder that uses the rotation pulse for signal output, and the main characteristics are the standard shape and diversified shape structure; The internal coding is stable, the signal output qiang, and the pulse value and positioning value are clear. Therefore, when choosing this type of punching encoder, ...

1. The temperature and humidity sensor will drift during use, which is impossible to avoid. 2. The fundamental reason for the drift is that all pressure sensors are based on the elastic deformation of a kind of material, no matter how outstanding the elasticity of the raw material is, after each elastic recovery, there will always be ...

1. The device mode of inclination sensor is divided into two types: horizontal device and vertical device, but whether it is a horizontal or vertical device, the sensor device surface should be parallel to the face of the measured object when installing, and the influence of dynamic and acceleration should be reduced at the same time. ...

1. Encoder self-failure: It refers to the failure of the encoder's own components, resulting in its inability to generate and output correct waveforms. In this case, the encoder needs to be replaced or the internal equipment repaired. 2. The encoder connection cable is faulty ...

A smooth production process is the policy that every production manager strives to achieve. In order to accomplish this policy, a high-performance automation system is required. With the new FDH-1 handheld bus diagnostic device, you will be on your way to maximizing the availability of your equipment.

The use of robots that can exchange things requires high-speed movement and fast rotation. Conventional solutions for energy chains or slip rings lack the necessary flexibility with regard to this automation technology. Our wireless sensing system (WIS) enables non-contact in places where a fixed connection is not possible.

Rotary encoders are a class of sensors used to detect the angle of rotation and its derived mechanical parameters, including velocity and acceleration, etc., and can detect transmission movements such as rotation and linear lines. Due to its widespread use, rotary encoders convert mechanical inputs into electrical signals, which can be used by counters, tachometers, programmable...

1. Slotted photoelectric sensor A light transmitter and a receiver are mounted face to face on either side of a slot is a fork photoelectric. The luminaire announces infrared or visible light, and the light receiver receives the light unobstructed. But when the object to be detected passes through the trough, the light is blocked ...

1. Optical adjustment The factory setting of the sensor is the maximum range, and this setting is subject to change. Note: Only use your finger to press the button. ​ 2. Set the range (when aborted) Adjust the sensor with a reflector; ...

In order to select the best liquid level sensor, we need to understand not only the characteristics and conditions of the liquid to be measured, but also the advantages and limitations of different detection methods, and then we can select the most suitable sensor. Here are some of the most common inspection technologies on the market today. ...

An encoder is a device that compiles or converts signals or data into signals that can be communicated, transmitted and stored – encoders can be divided into two categories: incremental and absolute. Incremental encoders are the most important way to convert bits ...

Sensors we all know, at the same time the market demand is very large, there are many varieties, during which people are more commonly used light sensors and photoelectric sensors, although only a word difference, but the difference between the two is very large. 1. Different definitions: ...

The premise of load cell replacement is that the axis of the applied force coincides with the axis of the sensor, we should know one thing, that is, with the increase of the additional load, the microvolt/indexing signal output by the sensor decreases. About the electromechanical junction of the S-shaped sensor installed in the second force transmission link ...

In recent years, the use of torque sensors has gradually increased, it can convert physical changes into accurate electrical signals, so what methods can torque sensors go through? The proven test method of torque sensors is ...

There are two types of accelerometers: one is the angular accelerometer, which is improved from gyroscopes. The other is a linear accelerometer. It can also be divided into single-axis, dual-axis and three-axis accelerometers according to the measurement axis. At the moment, accelerometers are widely used in game controls.

In electrical intrinsic safety explosion-proof, we generally divide the workplace into explosion-proof areas and non-explosion-proof areas. There is the transmission of electrical energy between the explosion-proof area and the non-explosion-proof area, for example, the switches, buttons, sensors, etc. in the explosion-proof area are connected to the PLC placed in the electrical cabinet in the non-explosion-proof area through wires.

1. Selection of reliability The potential of a sensor to persist in its properties over a period of time is called reliability. In addition to its own structure, the key factor affecting the long-term reliability of the controller is the use of harsh environments. Evil...

1. Position with the sensor installation boss, and fix it on the metal plate with screws, nuts or pressing plates. When installing the sensor, it is strictly forbidden to turn and drill the shaft and shell to avoid the shaft or shell being subjected to external impact and pressure, and the axial and radial direction of the shaft is not allowed to be subjected to impact force and pressure ( ...

There are two common types of sensor switches: NPN type and PNP type, so what are the differences and differences between them? For example, there is a switch VT in the NPN open collector output circuit, and the output OUT is through the switch ...

Pressure: The force acting vertically and evenly over a unit area. In physics, this is called "pressure". Range: i.e. the scale of pressure. Refers to the use of sensors to measure the amount of pressure. Medium: refers to the object to be measured. Generally steam, water, oil, acid, alkali or mixture. Precision...