"In 2022, with all the challenges, especially for small and medium-sized manufacturing companies – we need to think differently: if we want to support our customers and add value in our digital transformation, it's not just a single product innovation that will change. It will combine expertise in automation, digitalization and the Industrial Internet to empower customers. It is a total solution for optimizing customer processes. It's about understanding the whole system and being able to provide a solution that does something specific. This is a difficult task, and we will continue to develop and grow together with our customers!"
Prof. Friedhelm Loh, Owner and Chairman of the Board of Directors of the Friedhelm Loh Group, together with the CEOs of Rittal, Epan & Cideon and Edge Cloud Germany, presented Rittal's vision for a smart, connected ecosystem at a press conference at the Hannover Messe.
At the 2022 Hannover Messe in Germany, Rittal, Epan and Edge Cloud Germany made their joint debut – integrating the unique resources and advantages of each brand to jointly accelerate the digital transformation of enterprises and create a true smart factory. Industrial professionals and cloud visitors from all over the world will be able to visit the joint booth to experience first-hand how Rittal, Epan and Germany edge clouds converge to provide customers with more efficient, secure and sustainable solutions.
A smart factory with AI, real-time operating systems, 5G, and Industry 4.0 applications is the benchmark for many of today's fast-growing manufacturing companies in the future. From the past 10 years when the manufacturing industry proposed the Industry 4.0 revolution to the next decade, it is not difficult to see that digital development is always worth exploring. In fact, for most manufacturing companies, even if they're in their infancy – even if they're just starting to invest time – they can be rewarded if they're willing to take the first step.
Markus Asch, CEO of Rittal International, said: "Manufacturing companies should realise that if they want to create sustainable products more flexibly and efficiently, then building a digital and networked manufacturing IT ecosystem is the only way to grow. Based on this key point, the Friedhelm Loh Group combines the wisdom and experience of Rittal, Epan and Edge Cloud in Germany in the industrial sector to break down the common barriers between various industries such as mechanical engineering, automation, IloT (Industrial Internet) and IT (Information Technology) and unlock more potential for customers. ”
This joint appearance will focus on providing more efficient, safer and sustainable solutions for high-end manufacturing.
Digitize processes: from engineering to operations
The EPLAN platform is an engineering system built around standardized data, interfaces and cloud services that enable integrated and transparent workflows along the entire value chain, from engineering, manufacturing and commissioning to plant operations. Solution provider EPLAN presents the current EPLAN Platform 2022 with its object-oriented data management capabilities, the new "Insertion Center" and the cleverly integrated cloud solution. At the same time, Hannover offers interested visitors the opportunity to get a first glimpse of the upcoming release of EPLAN Platform 2023, which will significantly simplify the handling of circuit diagram macros and comply with international norms and standards. The new graphics engine and central device management system are also waiting for further innovative experiences from the industry public. With the new EPLAN Data Portal, companies can order standardized parts data for their own devices via EPLAN's payment system, which will also be presented to you at the trade fair.
In addition, the demonstration of the rolling conveyor illustrates how we can benefit from a fully digital engineering database – even in the event of a machine failure, the root cause of the problem can be found as quickly as possible. EPLAN's cloud solutions are backed by technologies in the fields of Industrial Internet of Things (IIoT) and augmented reality (AR).
Cloud cabinet system
To ensure that the relevant panel and switchgear manufacturing data is always up to date, Rittal has developed the new digital cabling concept "Rittal ePocket". The QR code on the cabinet allows access to complete plant and system documentation, including the digital twin in EPLAN Cloud, which is always up-to-date throughout its entire service life. Service and maintenance personnel can access the latest cabling concepts directly on the system using a smartphone or tablet, ensuring fast troubleshooting during repairs and maintenance.
Cooling systems and services that improve sustainability
Energy-efficient and sustainable operation of control systems and switchgear is another key issue. As a result, Rittal is launching its new Blue e+ S cooling unit, which, thanks to efficient hybrid cooling with free-cooling heat pipes, has shown initial test installations to deliver energy savings of up to 70% compared to previous solutions. A new refrigerant further reduces the global warming potential. Intelligent service networking technology is also integrated. The Rittal Smart Service visualizes the operating characteristics of the cooling unit. Data is transmitted in real-time to facilitate the planning of required maintenance and ensure early detection of critical errors. The automatic processing of cooling unit data forms the basis for the rapid correction of errors, thus maximizing machine availability.
The production process is completely transparent
There is no single solution specifically for machine operation. German Edge Cloud points out that even the first step towards digital transformation presents an important opportunity to optimize existing manufacturing structures. In the case of the new Rittal factory in Haiger, the IIoT expert will show how data can be used in an intelligent production environment designed according to Industry 4.0 principles. More than 250 high-tech machines and plant components are connected to each other, and the digital production system Oncite increases transparency and expands the possibilities for plant and system control based on data analysis. All this helps production managers to identify bottlenecks, problems and disruptions in development in a timely manner and intervene immediately.
Rittal's RiMatrix Next Generation offers future-proof, modular infrastructure solutions for data centres of all sizes and requirements as the backbone of all IT applications. A modular, end-to-end system spanning rack, power, cooling, security, and monitoring makes it easy to quickly build custom solutions for all IT scenarios. Everything from racks, rack edges, enterprise and colocation data centers to hyperscale data centers can be configured. The 3D data centre planning and construction showcase illustrates the latest solutions from the Rittal Competence Centre. A particular highlight is the all-in-one OT solution for Rittal's data centre containers with the innovative Blue e+ outdoor cooling unit, which enables the outdoor expansion of existing IT infrastructure based on resource-saving, cost-effective and energy-efficient cooling.
To simplify and speed up the selection and procurement process for system solutions for enclosure technology, Rittal offers digital procurement processes and tools, such as the new RiPanel configurator and the online shop. The key to speeding up the process lies in the standardized "Rittal-The System". The platform products include cabinet systems, temperature control systems and power distribution technology. Innovations include the VX SE freestanding cabinet, the AX compact plastic cabinet, the VX25 TopTherm chiller, and the VX25 Ri4Power system with arc fault levels (Classes A and B). Not only that, but Rittal is also offering new system solutions for energy storage and charging infrastructure.
|
More on that
|
Rittal fans – analysis of the reasons why cooling fans do not rotate
1. Power failure: The power supply of the fan fails, such as the power cord is disconnected, the power plug is loose, etc., which will cause the current to fail to transmit normally, resulting in the fan stopping and rotating.
2. The temperature is too low: Some heat dissipation windbreakers have a temperature protection function, when the temperature is too low, the fan will automatically ...
|
|
Rittal Cabinet - Knowledge Q&A of High and Low Voltage Distribution Cabinet (21-30)
21. What does the workplace have to meet for high-voltage electrical appliances?
Answer: A. Rated voltage, B. Maximum working voltage, C. Rated current, D. Rated short-circuit interrupting current, E. Short-time withstand current and peak withstand current.
22. What are the basic requirements for a high-voltage circuit breaker?
Answer: A work ...
|
|
Rittal Cables – the scope of application for wires and cables
Power system
The wire and cable products used in the power system mainly include overhead bare wires, busbars (busbars), power cables (plastic cables, oil-paper power cables, which are basically replaced by plastic power cables), rubber sheathed cables, overhead insulated cables, branch cables (replacing part of the busbars), ...
|
|
Rittal cables – safety requirements for cables
1. When the cables cross each other, the high-voltage cable should be below the low-voltage cable. If one of the cables is protected by a pipe or separated by a partition within 1m before and after the intersection, the minimum allowable distance is 0.25m.
2. When the cable is close to or crosses the thermal pipeline, if there are thermal insulation measures, the flat ...
|
|
Rittal Blue e+ cooling unit in the cooling of the Airbus A320 test plant
A new A320 Airbus aircraft must pass rigorous testing before it can be put into service, so to ensure a smooth flight, not only the aircraft itself needs to be protected from overheating, but also the test hardware needs to be properly protected. Airbus uses Rittal Blue e+ cooling units to make it ...
|
|
Rittal enclosures – how to determine the quality of a sheet metal enclosure cabinet
1. Look at the material, you should choose a sheet metal chassis cabinet, and the steel plate must be thick, you can feel which ones are thick and which ones are thin when you knock them with your fingers. Its rugged enclosure protects the board, power supply and storage devices, and is resistant to voltage, shock, and dust.
|
|
Rittal cables – the types of cables in detail
Flame retardant rubber sheathed cable
1. Use
This product is a series of mining rubber sheathed flexible cables. It is suitable for power connection of shearers and similar equipment devices with rated voltage Uo/U of 1.9/3.3KV and below. It is mostly used in coal mines.
2. Conditions of use
Long-term core ...
|
|
Rittal cabinets – Q&A on the basics of high and low voltage distribution cabinets
What are the principles for drawing and reading the schematic diagram of electrical control circuits?
Answer: A. The schematic diagram is generally divided into power supply circuit, main circuit, control circuit, signal circuit and lighting circuit.
B. In the schematic diagram, the position of the contacts of each electrical appliance is according to the ...
|
|
Rittal cabinets – the uses and characteristics of commonly used low-voltage distribution cabinets
▲ GGD AC low-voltage distribution cabinet:
(1) Use
GGD type AC low-voltage distribution cabinet is suitable for substations, power plants, factories and mining enterprises and other power users AC 50Hz, rated working voltage 380V, rated working current 1000-3150A distribution system, as a power ...
|
|
Rittal for AE model 2733.000
Rittal for AE
Product model 2733.000
Retrofit on AE in place of a door, or on a sufficiently large flat surface.
Product Description: For retrofitting on AE instead of doors and flat surfaces
Material: Frame: Aluminum, by natural aluminium anode
|
|
Rittal cabinets – what do you need to pay attention to when tidying up your cabinets?
1. In principle, the power cord and network cable of the cabinet should be sorted out separately;
2. The placement of the equipment should be appropriate, avoid squeezing each other, avoid being too high or too low, and avoid being too close to each other;
3. If there are too many devices in the cabinet, the equipment should be numbered;
4. For each line ...
|
|
Rittal enclosures – what should I consider when choosing a cabinet?
1. Reliable quality assurance
Choosing the right server and cabling cabinet is important, and the slightest negligence can lead to huge losses. No matter which brand of product it is, quality is the first thing that users should consider.
2. Load-bearing guarantee
With...
|
|
Rittal cabinets – what are the installation specifications for the cabinets?
1. The host, storage equipment, and server cabinets should be partitioned and arranged, and the host, storage equipment, server cabinets, UPS power supplies, precision air conditioners and other equipment should be set aside for maintenance according to product requirements, and the maintenance interval overlaps with adjacent equipment;
2. Enter the equipment in the computer room in stages.
|
|
Rittal cabinets – what are the technical requirements for the cabinets?
1. It should have good technical performance. The structure of the cabinet should be designed according to the electrical and mechanical properties of the equipment and the requirements of the use environment, so as to ensure that the structure of the cabinet has good stiffness and strength, as well as good electromagnetic isolation, grounding, noise isolation, ...
|
|
How to use the Rittal basic controller for cabinet air conditioning
Carefully push the decorative panel back onto the monitor until you hear it snap into place.
· Reinsert the monitor into the panel or blind.
· Reinstall the louver pane or panel onto the cabinet air conditioner.
Reset the base controller
The air conditioner in the cabinet emits a high ...
|
|
How to set the temperature of the Rittal air conditioner
1. Set the target temperature: the default temperature of the original factory is 35°C, you can press and hold the set button for more than 1 second after starting, the parameters start to flash, complete the temperature adjustment by pressing the UP and DOWN buttons, and after adjusting to the target temperature, press the set button to store the set parameters.
2. High temperature alarm: ...
|
|
Rittal cabinets – judgment and handling of high-voltage switchgear closing faults
Closing faults can be divided into electrical faults and mechanical faults. There are two types of closing methods: manual and electric. Failure to close manually is generally a mechanical failure. Manual can be closed, electric can not close is an electrical fault.
1. Protection action: The protection action has been analyzed in front to trip the switch. ...
|
|
What are the functions on the operation panel of the inverter control cabinet?
Display parameters: The control panel can display various parameters of the inverter, such as input/output voltage, current, frequency, speed, etc.
Parameter setting: The control panel can set various parameters of the inverter, such as operating mode, frequency range, acceleration time, deceleration time, etc.
...
|
|
Rittal and Epan – the intelligent future of drive cabinet systems
"Promote the deep integration of the Internet, big data, and artificial intelligence with the real economy, and make the digital economy bigger and stronger." The new generation of information technology is accelerating the all-round and in-depth integration with the traditional manufacturing industry.
Rittal and Epan, with "digital twins" from virtual to real, help control cabinets and open ...
|
|
Rittal enclosures – types of sheet metal enclosures
In terms of structure, there are two ways to classify sheet metal cabinets:
According to the division of the cabinet frame, it can be divided into the whole plate type and the column and beam combination type;
According to the way of cabinet angle connection, it can be divided into four forms: adhesive connection, screw connection, pin connection and welded connection.
...
|
|
Contact
working hours
