How to use the Rittal basic controller for cabinet air conditioning

First of all, the number of the control cable often starts with the letter "C", which indicates that the control cable is specially designed to connect different sensors and control devices as a medium for signal transmission. This kind of cable can transmit data signals, and has a certain resistance to wear and chemical corrosion, so it is widely ...

1. Determine the material of the distribution box First of all, from the material selection, the distribution box on the market is divided into plastic and metal two materials, metal material is durable, strong resistance, but it is easy to rust and corrode when encountering water stains; Although plastic is light and cheap, it is not very durable. Therefore the root ...

The construction of new infrastructure (new infrastructure) is a change in the upgrading and transformation of the industrial structure. As an important part of the new infrastructure, the data center provides a solid and extensive infrastructure guarantee for 5G, artificial intelligence, Internet of Things and other occupations. Rittal brings a new generation of infrastructure solutions ...

1. Set the target temperature: the default temperature of the original factory is 35°C, you can press and hold the set button for more than 1 second after starting, the parameters start to flash, complete the temperature adjustment by pressing the UP and DOWN buttons, and after adjusting to the target temperature, press the set button to store the set parameters. 2. High temperature alarm: ...

How to make it simpler? How can safety be paramount? Still worried about not being able to reduce the cost of the system? The most suitable cabinet system is just a dream? You've got you covered – faster, safer, simpler, compatible, and versatile...

What is Phase Order? Answer: It is the order of the phases, which is the sequence in which the instantaneous value of alternating current changes from negative to positive through zero What is the safety distance of the human body grounding point when a grounding fault occurs in high-voltage equipment? A: Indoor should be larger than 4 m, outdoor should be larger than 8 ...

1. It is not displayed at that time. Solution: Check whether the sample signal cable is not connected. 2. Whether the fuse core of the controller in the cabinet is burned out. Solution: Remove the burned out fuse core and replace it with a new one. 3. The voltage of the distribution cabinet is too high, and the overvoltage alarm. Workaround: Re...

Power system: The wire and cable products used in the power system mainly include overhead bare wires, busbars (busbars), power cables (plastic cables, oil-paper power cables (basically replaced by plastic power cables), rubber cables, overhead insulated cables), branch cables, magnet wires and power equipment...

1. DC resistance: 20°C, 0.4mm copper wire, less than or equal to 148Ω/km, 0.5mm copper wire, less than or equal to 95Ω/km. 2. Insulation electrical strength: 1min 1kv between conductors does not break down, conductors and shields 1min 3kv do not break down 3. Insulation resistance: each core and the rest of the core ...

1. Normal power transmission operation process of low-voltage distribution cabinet: 1. All load switches are disconnected, confirm that the switches have at least one breakpoint; 2. Confirm that the power switch is in the disconnected position; 3. Send the power supply to the operation circuit, and the status indication is normal; 4. The incoming switch is - isolated ...

1. What are the classifications of Rittal cabinets? 1. According to the function, it can be divided into: fireproof and anti-magnetic cabinet, power cabinet, monitoring cabinet, shielding cabinet, safety cabinet, waterproof cabinet, safe, multimedia console, file cabinet, wall-mounted cabinet. 2. According to the scope of application, it can be divided into: outdoor cabinets, ...

1. Built-in air conditioner for heat dissipation The cabinet is equipped with a refrigeration system, the evaporator and power devices are installed inside the cabinet in a closed manner, and the condenser and compressor are placed in the external circulation air duct or outside the cabinet. Since the power unit is sealed in the cabinet, as long as the appropriate sealant is used ...

1. GGD AC low-voltage distribution cabinet has the characteristics of high breaking capacity, good dynamic and thermal stability, flexible electrical scheme, convenient combination, seriality, strong practicability, novel structure and high protection level. It can be used as a replacement product for low-voltage switchgear. Structural features ...

1. The cabinet door is off the ground 25. 5mm 2、2. The 5mm thick mounting plate has 23mm wide U-shaped curved edges on both sides, which makes the mounting plate stronger and easier to handle 3. The three cable introduction cover plates at the bottom of the box can be replaced by each other, which is easy to move, easy to import cables, and easy to open holes into the line ...

We know that electronic and electrical equipment is installed in the electrical cabinet, in fact, there are working temperature requirements, the general storage temperature can not be lower than minus 25 degrees, the working temperature can not be lower than minus 20 degrees, but now the outdoor temperature in the north is very simple to reach the lower limit of this working temperature, this time heating ...

A new A320 Airbus aircraft must pass rigorous testing before it can be put into service, so to ensure a smooth flight, not only the aircraft itself needs to be protected from overheating, but also the test hardware needs to be properly protected. Airbus uses Rittal Blue e+ cooling units to make it ...

What are the relay protections of small and medium-sized substations? A: A overcurrent protection; B. Current quick-break protection; C. Time-limited current quick break protection; D Low voltage protection. What is the classification of substation monitoring system? A: Manual monitoring, automatic monitoring of telecontrol devices and micro-...

1. DC cable (1) Tandem cables between components. (2) Parallel cables between strings and between strings and DC distribution boxes (combiner boxes). (3) The cable between the DC distribution box and the inverter. The above cables are all DC cables, outdoor laying ...

▲ GGD AC low-voltage distribution cabinet: (1) Use GGD type AC low-voltage distribution cabinet is suitable for substations, power plants, factories and mining enterprises and other power users AC 50Hz, rated working voltage 380V, rated working current 1000-3150A distribution system, as a power ...

1. Deliver the cold air to the network cabinet: Because the equipment in the cabinet needs the air conditioning the most. 2. Deliver the cold air to the front of the network cabinet: because the cold air can only enter the module server chassis from the front of the server to play a role in heat exchange. 3. Precisely adjust the ...