Five error factors for load cells – Turck

The sensor uses a specially shaped rotor and wire-wound coil to simulate the linear displacement of a linear variable differential transducer (LVDT), which has high reliability and functionality, and the rotary motion of the rotor shaft produces a linear output signal that moves around the factory-preset zero position ± 60 degrees (120 in total). This...

First, the sensor industry The national standard GB7665-87 defines the definition of sensors as follows: "A device or equipment that can sense the rules and be measured and converted into usable signals according to certain rules, usually composed of sensitive elements and conversion elements". A sensor is a detection device that can ...

The so-called inclination angle is a relative orientation with reference to the horizontal line and the vertical axis. Changes in orientation can be monitored quickly and precisely by means of inclination sensors. The acceleration of gravity is a parameter measured by the sensor. This measurement principle is equivalent to using a plumb line to produce a change of direction in a gravitational field. Turck inclination ...

1. Recognize the type of pressure sensor (1) Electromechanical: The internal mechanical structure of the product, the pressure sensor made of springs, levers, dispatching screws, metal housings, etc., and contact module equipment, does not contain processing circuits inside, and the output is the pressure switch side of the switching quantity.

Since the beginning of the 60s, China has made great progress in the research and development, design, production, and reliability improvement of sensors after the national research and development from the "Sixth Five-Year Plan" to the "Ninth Five-Year Plan", and has initially formed a system of sensor research, development, production and use.

In modern industrial production, especially in the process of automated production, it is necessary to use various sensors to monitor various parameters in the production process, so that the equipment is in normal or optimal condition, so that the product can reach the best quality. Therefore, it can be said that if there are many excellent sensors, modern ...

The first is pressure, and the transmitter can't afford to lose it. In this case, check if the pressure connector is leaking or clogged, if not, check the wiring method and check if the power supply is normal, the brief pressure to confirm if the output has changed, or if there is an output at the zero point of the sensor ...

The use of hysteresis dynamometers in the field of dynamometer applications (HD series) is suitable for testing low to medium power (up to 14kW intermittent mode) motors. The hysteresis dynamometer does not need to rely on speed to generate torque, but uses a hysteresis braking system, which can carry out the whole process test from no-load to latching. Lag...

1. Thermocouple Thermocouples are the most commonly used temperature sensors for temperature measurement. Its main benefits are a wide temperature scale and adaptability to a wide range of atmospheric environments, and it is robust, inexpensive, does not require electricity, and is also the cheapest. A thermocouple consists of two different metal wires connected at one end (metal A and ...

On April 22, the first 2021 Chengdu International Industry Fair kicked off in the Western China International Expo City. As the first show in the western region after the epidemic, Turck showcased the future-oriented IIoT ecosystem solutions for digital production to the Sichuan and Chongqing audiences.

Ultrasonic sensors In order to ensure the best material flow, the in-plant logistics system often uses conveying equipment, and if you want to run the conveying equipment at high speed, it is necessary to obtain the location information of the container. Turck's RU50 ultrasonic sensor is the ideal solution for inspecting containers in intralogistics systems.

1. According to the measurement target and measurement environment In order to carry out a detailed measurement work, it is necessary to first consider the principle of the sensor to choose, which needs to be analyzed and many elements can be confirmed. Because, even if the same physical quantity is measured, there are sensors with multiple principles to choose from.

Carbon fiber composites are becoming increasingly important, especially in the automotive industry and its Tier 1 suppliers. The use of carbon fiber in industry has doubled in the last five years and is forecast to quadruple by 2030. A few years ago, products containing only carbon fiber were very small ...

A linear displacement sensor is an electrical signal device that converts the linear mechanical displacement into a linear or arbitrary function relationship through the potentiometer element. In order to achieve the intention of measuring displacement, it is necessary to have a confirmation relationship between the change in displacement and the change in resistance. Usually...

Turck's encoder range has been strategically expanded even further. We can now consider our customers to offer newer and faster encoders with IO-Link interfaces (COM 3, 230.4 kbps). As part of Turck's product range ...

Since the beginning of the 60s, China has made great progress in sensor research and development, planning, production, reliability improvement, etc., and has initially formed a system of sensor research, development, production, production and application.

1. Estrangement Do not press or touch the barrier as this may damage or alter its calibration, especially on low pressure scale types. 2. Accessories and hardware With the right pressure, additional fittings and hardware, make sure you have the right thread type and size. If the demand ...

BL ident products with long-interval UHF technology from Turck can be used in product control, logistics or process automation systems. Compared to HF, UHF has a longer read/write interval. UHF modules can be sensitively integrated into the BL ident system without the need for messy equipment ...

1) There is a difference between the two-wire system and the three-wire system of the proximity switch, and the three-wire system is divided into NPN type and PNP type, and their wiring is different 2) The wiring of the two-wire proximity switch is relatively simple, and the proximity switch can be connected to the power supply after being connected to the load in series. 3) Three-wire proximity switch ...

1. Shielding skills Containers are made from metal materials. Wrapping circuits that require maintenance between them can effectively prevent the disturbance of electric or magnetic fields, and this method is called shielding. Shielding can be divided into electrostatic shielding, electromagnetic shielding and low-frequency magnetic shielding. 2. Electrostatic shielding ...