Turck's highly efficient IO-Link encoder series

1. Observe whether the appearance of the sensor is deformed and cracked. If this happens, contact the sensor manufacturer to replace the sensor. 2. Find the sensor connection terminal of the weighing controller (weigher) and measure the sensor connection circuit. In general, the excitation voltages (EXC+ and EX...

1. Sensor scale: (1) In normal use (static test or quasi-static test, the frequency of use is not high), the scale of the sensor should be selected to consider the force value of the measurement, but also to consider the weight of the auxiliary thing (test fixture) and so on.

1) Confirm the type and maintenance mode of circuit breaker according to the maintenance requirements of the line - confirm the selection of frame type, equipment type or current limiting type, etc. 2) The additional voltage of the circuit breaker UN should be equal to or greater than the additional voltage of the line being maintained ...

Since the beginning of the 60s, China has made great progress in sensor research and development, planning, production, reliability improvement, etc., and has initially formed a system of sensor research, development, production, production and application.

Robots are called robots because they have a lot of intelligent qualities. In the world of human facial features, the facial features of robots are sensors. Sometimes, a human function needs to be completed by multiple sensors working together on a robot. Now the intelligent robot is classified ...

1) Pay attention to the structure and data of the object to be measured, and the general laser displacement sensor needs to measure the triangular optical path with intact requirements. If the measured object has deep grooves or messy appearance, it may cause the triangular light path to be occluded, so that it cannot be measured. There are also some light-absorbing materials, such as black rubber and other materials, most of the light intensity will be ...

The first type: screw device The method device should be selected quenched steel screws, at the time of the device, the screws are first screwed into about half the length, the screws should be straight with the surface, the sensor should be fixed according to the specified torque, and a layer of grease should be applied to the joint surface.

Filters used for suppressing sensor noise require the following conditions. ●Power or signal lines required for equipment operation ●Noise that causes maloperation OneChip sensors come in many varieties and names, and the filters needed to target the noise that constitutes malfunction ...

A differential pressure sensor is a sensor used to measure the difference between two pressures, and is generally used to measure the pressure difference between the front and rear ends of a certain equipment or component. Typical Applications: It is used to measure the exhaust particle trap (DP ...

On June 27, 2018, Turck's Uprox series inductive sensors were awarded the "AI User Praise Award" at the 2018 (18th) Advanced Manufacturing Skills and Car Manufacturing Industry High-Level Forum and Award Ceremony. The award was selected by readers in the car industry, and it took several months to select ...

The upgraded functionality of Turck's IO-link master modules greatly simplifies the installation, commissioning, and protection of IO-Link devices. Turck has upgraded its Web server to enable the installation, commissioning and protection of IO-Link devices.

Turck has expanded its connector portfolio with the new TXL and TEL series now available in straight or elbow M8 and M12 connectors. In order to meet the different needs of users, we can provide three-pin, four-pin, five-pin straight or elbow plugging ...

1. For different viewing bodies and different viewing distances of different raw materials, different types of Turck proximity switches should be selected to make them have a high performance-to-price ratio in the system, for which the following criteria should be followed in the selection: ...

1. Sensor body: including the sensor's shell, mechanical structure, circuit board, etc. 2. Deformation element: It is the most important part of the tension sensor, which converts the force into signal output. Commonly used deformation elements are strain gauges, piezoresistive sensors, piezoelectric crystals, and compact gases.

Turck's BCT series sensors feature teachable pushbuttons and LEDs at the rear of the body for maximum user convenience. Turck is presenting a new generation of capacitive sensors from the BCT series, which are primarily used for level detection. Use...

Precautions 1, in the use of the sensor to prevent contact with some corrosive or overheated media, this point is very important, if we do not pay attention to this point when using the sensor, it will affect the relevant use of the sensor. Note 2: In ...

MR-C series Relays from two to four electric shocks At the same time, it has a complete series of special industrial relays and power relays Unique coil voltage levels - 220V DC and 400V AC The C5 series has become an important part of the MR-C series, and the electric shock capacitance can be ...

A linear displacement sensor is an electrical signal device that converts the linear mechanical displacement into a linear or arbitrary function relationship through the potentiometer element. In order to achieve the intention of measuring displacement, it is necessary to have a confirmation relationship between the change in displacement and the change in resistance. Usually...

Collision sensors are control signal inputs in airbag systems. Its function is that when a car collides, the collision sensor detects the intensity signal of the car collision, and inputs the signal into the airbag computer, and the airbag computer determines whether to detonate according to the signal of the collision sensor.

Turck's TBEN-S-RFID block I/O modules are now available as a field logic controller Ahead of SPS IPC Drives 2017 (Industrial Automation in Nuremberg, Germany), Turck has expanded its TBEN-S-RFID ...