Korea Hyundai Heavy Industry Robot - Characteristics and Applications of Handling and Palletizing Robot

1. In order to reduce welding deformation, choose a reasonable welding sequence. The welding sequence is determined by the length of the walking path of the welding gun. 2. Optimize the welding parameters, make working specimens for welding test and process evaluation, so as to obtain the best welding parameters. 3. Adopt a reasonable positioner...

1. The undercut may be due to improper selection of welding parameters, the wrong point of view of the welding gun or the orientation of the welding gun, and the welding parameters can be appropriately adjusted to change the welding parameters, and the welding gun posture of the automatic welding robot and the relative orientation of the welding gun and the workpiece can be adjusted. 2. The welding deviation may be welded.

1. Degrees of freedom The degrees of freedom can be explained by the number of axes of the robot, the more axes of the robot, the more degrees of freedom, the greater the flexibility of the movement of the mechanical structure, and the more versatile. However, the increase in degrees of freedom makes the structure of the robotic arm complex, which will reduce the rigidity of the robot. While...

1) Stabilize and improve the welding quality, and reflect the welding quality in the form of numerical values; 2) improve labor productivity; 3) Improve the labor intensity of workers and work in harmful environments; 4) reduce the requirements for workers' operation technology; 5) Shorten ...

1. It can replace manual work in harsh environments such as danger, low temperature, high heat, etc., and reduce labor costs. 2. It can carry out heavy and repetitive labor for a long time, which is simple to operate, improve labor productivity and ensure product quality. 3. According to different products, different designs ...

1. Carry out correct debugging. Before using the arc welding robot for welding work, it is necessary to debug the work, adjust the welding parameters according to the specifications of the weldment and the welding environment, observe whether the weld is well filled, and if there are welding defects, it needs to be checked and corrected in time.

1. Collision of guns: It may be due to the deviation of the workpiece assembly or the inaccuracy of the TCP of the welding gun, you can check the assembly situation or correct the TCP of the welding gun. 2. If there is an arc fault, the arc cannot be initiated: it may be due to the fact that the welding wire does not touch the workpiece or the process parameters are too small.

The robot itself The six-joint robotic arm driven by servo motor is the majority, and the type is selected according to the requirements of welding conditions, load, welding operation span, welding accuracy requirements, welding torch cable installation, wire feeder installation and other factors. Robot control cabinet Equipped with arc welding function package ...

Advantages of palletizing robots: 1. High productivity Productivity is improved with the help of functions, structures, and special tools that optimize the use of handling and palletizing. Fast and large action scale, make a great contribution to the progress of production function, the selection of hollow structure to avoid gripper cable problems, handling ...

A conveyor robot is an industrial robot that can perform automated transportation operations. With the development of the logistics and warehousing industry in recent years, as well as the advancement of intelligent skills, the handling robot has been greatly improved in terms of skills, and it has gradually been implemented and recognized in the warehousing and logistics industry. So, did you know ...

The robot welding adopts argon-rich mixed gas shielded welding, and the welding defects in the welding process generally include welding deviation, undercut, porosity, etc., which are analyzed as follows: (1) The welding deviation may be due to the incorrect position of the welding or the problem of finding the welding gun. At this time, consider T...

(1) Arc welding robot system optimization and integration technology: The arc welding robot adopts AC servo drive technology and high-precision, high-rigidity RV reducer and harmonic reducer, which has good low-speed stability and high-speed dynamic response, and can realize maintenance-free function. (2) Coordinated control ...

1. Robots 2. Automatic wire feeding device 3. Welding power supply 4. a welding gun 5. a positioner 6. Tooling fixtures

1. Robot system failure (1) A collision occurred. It may be due to deviations in the assembly of the workpiece or inaccurate TCP of the welding gun, the assembly can be checked or the TCP of the welding torch can be corrected. (2) If there is an arc fault, the arc cannot be initiated. It may be due to the fact that the welding wire is not in contact with the workpiece or process parameters.

(1) Arc welding robot system optimization and integration technology: The arc welding robot adopts AC servo drive technology and high-precision, high-rigidity RV reducer and harmonic reducer, which has good low-speed stability and high-speed dynamic response, and can realize maintenance-free function. (2) Coordinated control ...

Workstations (Units) If the workpiece does not need to be dislocated during the entire welding process, the workpiece can be positioned on the table with a fixture, which is the simplest system. However, in actual production, more workpieces need to be dislocated during welding, so that the weld is in a better position.

With the progress of science and technology and the continuous development of AI intelligence and the new crown pneumonia epidemic, Hyundai recently released the latest robot DAL-e, the DAL-e robot with AI artificial intelligence, has gone to the exhibition to practice and entertain work, and collect data from it to learn and grow, together through voice and touch, but also ...

1. MIG welding (MIG/MAG arc welding): This welding method uses the continuously fed welding wire and the burning arc between the workpiece as a heat source, and the gas sprayed by the torch nozzle protects the arc for welding. The inert gas is generally argon. 2. TIG welding (inert ...

1) The positioning accuracy of the parts is higher, and the relative position accuracy of the weld is higher, which should be ≤ 1mm. 2) Because the weldments are generally welded by a plurality of simple parts grouped, and the assembly and positioning welding of these parts are carried out in order on the welding fixture, therefore, their positioning and ...

1. Mechanical production With the intensification of the welding task of the mechanical production operation, the welding operation has poor working conditions, the heat radiation is large, and it is a dangerous operation, and there are many large-scale equipment in the mechanical production, which also increases the difficulty of welding, and the welding robot ...