Wiener bus adapter features:

Functional aspects

The bus bar is made of copper or aluminum, which has high current density, small resistance and small skin effect, and does not need to be used for capacity reduction. The small voltage drop also means that the energy loss is small, which ultimately saves the user's capital. As for the cable, because the cable core is a multi-strand thin copper wire, its root area is larger than that of the bus bar of the same current level. In addition, the "skin effect" is severe, and the current rating is reduced, and the voltage drop is added, so that it can easily generate heat. The energy loss of the line is large, and it is simply aged.

Wiener bus adapter features:

security

The metal closed shell of the bus duct can protect the bus bar from mechanical damage or animal damage, the device that inserts the unit is very safe in the power distribution system, the shell can be grounded as a whole, the grounding is very reliable, and the PVC shell of the cable is susceptible to mechanical and animal damage caused by high-strength closed busbar, the power supply must be blocked first when the cable is installed, and it will be dangerous if there is an error, especially the cable should be grounded on site, and the unreliable grounding will lead to dangerous addition.

Installations

The busbar is made up of many segments, each of which is both short and light. Therefore, only a few people are needed to complete the installation quickly. The bus has many standard parts and inventory, which can be shipped quickly and save time on site. Its tight "sandwich" construction is able to cut down on electrical space, freeing up more space for commercial use, such as renting out or as a public space. In the case of installation cables, it is a difficult task. Because a single cable is often heavy, the installation requires the cooperation of many people, and it takes a lot of time to complete. In addition, due to the tortuous radius of the cable, more installation space is required.

Route optimization

By using busway, we were able to incorporate certain branch circuits and convert them into a large busway with a plug-in box. It simplifies the electrical system and achieves lower current values for more strands. Therefore, the cost of the project is saved, and it is easy to protect. With regard to traditional cable routes, cables can make the electrical system extremely complex, bulky, and difficult to protect, thus wasting engineering costs and installation space.

Scalability

As far as the bus bar is concerned, the system expansion can be completed by adding or changing several segments, and the utilization rate is high from scratch. In most cases, the cable cannot be used from scratch, because the length and route are different, if we want to expand the system, we have to buy a new cable to replace the old one.

Plug-in switch box

The plug-in switch box can be used with an air-type busway. There is no need to add other accessories when installing. The plug pin is the most important part, it is made of copper alloy stamping, enhanced by heat treatment to enhance elasticity, and the appearance of tin plating, even if more than 200 times of plugging, it can still maintain stable contact capacity. The box is set up with a grounding point to ensure a reliable grounding, a switching circuit is set in the box, and a molded case circuit breaker can be used to protect the capacity of the tap line from overload and short circuit.

Wiener bus adapter features:

Sections viewed

Contact

working hours