Fujifilm portable ultrasonic flowmeter is used to check the flow rate at the outlet of a water pump in the field
Error analysis in the flow measurement process
Check for abnormal readings from the in-line flow meter
Avoid process interruptions and the background of more expensive tube opening costs
Waterworks are mainly used to treat water, and generally have the following procedures:
1: Water intake structures, such as bucket trough water intake structures, the role is to take water. It can also play a certain role in pre-settling
2: The first-level pump room pumps the source water to the water plant
Three: coagulation tank, add medicine in the water, so that the impurities in the water and the medicine act to form DAO floc
Fourth: sedimentation tank, the formed floc will be precipitated, thereby reducing the turbidity of water
Five: filter, water through the filter material layer, remove the particles in the water, at this time the turbidity of the water should reach less than 1NTU
Six: add chlorine to the water to kill pathogenic microorganisms, so as to meet the national standard
Eight: clear water pool, adjust the volume of water.
Nine: the second pump room will supply the water of the clear water pool into the pipe network.
Of course, the process of water plants in different places is different, but the principle is the same.
Measurement requirements
In order to control the flow of a wide range of larger quantities of liquids, tap water uses a number of in-line flow meters, most of which are electromagnetic flowmeters. Sometimes, one of the meters will measure abnormal flow rates, with large deviations in flow rates or even no flow at all. In the past, tap water removed these in-line flow meters from the production line so that the field maintenance department could test the performance and functionality of the meters. However, most of the dismantled flow meters are checked to be functional, and most of the errors actually occur at another point in the process chain. As a result, opening causes unnecessary process interruptions and more expensive opening costs. As a result, the customer was looking for an on-site verification instrument that could check the flow rate in the tube before dismantling the in-tube device.
solution
Fujifilm Portable Clamp-on Ultrasonic Flowmeter FSCS10C4-00C. This portable ultrasonic device is battery-powered and can be mounted outside the pipe to measure fluid flow rates. The diameter and thickness of the pipe of the waterworks are diverse, and the Fujifilm flowmeter can measure DN13-DN6000mm, and the Fujifilm ultrasonic flowmeter sensor can fully meet the needs of the application.
The compact evaluation unit (converter) measures fluid flow rates, flow rates and various diagnostic values. The readings are displayed graphically on a large colored liquid crystal.
The FSCS10C4-00C stores readings in integrated memory for data logging. They can also be transferred to a computer via an SD card for further analysis, or directly to a computer via a USB interface.
Customer Benefits
Portable ultrasonic flow meters are a suitable diagnostic device for water utilities to speed up repairs and save money. Before opening the pipe and removing the in-line flow meter, it is easier to check the process flow when there is a large deviation in the indication of the electromagnetic flow meter.
The FSCS10C4-00C Fujifilm Ultrasonic Flow Meter also provides customers with additional benefits: if one of the in-line flow meters is damaged or needs to be temporarily replaced, Fujifilm's portable clamp-on flow meter can be easily replaced, and it can be installed in a matter of minutes, thus minimizing downtime and avoiding interruption of the long-term repair process.
Clamp-on equipment can also be used in the expansion of the customer's production site. Before a new production process begins, engineers use water to conduct tests in order to identify possible leaks in good time. During testing, the FSCS10C4-00C can be used to check the flow of water and diagnose whether the installed pump is at the expected capacity, thereby increasing customer awareness of the process before production begins.
Use of the product
Fujifilm portable ultrasonic flowmeter
Model FSCS10C4-00C
Detector: FSSC1BC1-YY
Battery-powered, clamp-on liquid ultrasonic flowmeter
It is suitable for a wide range of process conditions
There is no need to interrupt the process when diagnosing the equipment
It is quick to start up and easy to install
Suitable for pipe diameters from DN13 (1/2") to DN6000 (240")
|
More on that
|
Application of frequency converter technology in injection molding machines
Injection molding is one of the main molding methods to make thermoplastics into various products, compared with other plastic molding methods, injection molding method has the advantages of molding products with complex structure and size, strong adaptability to plastics, short molding cycle, high production efficiency and easy to realize automation.
|
|
Introduction to instrument majors, future employment and development, etc
Instrumentation spreads through all sectors of the national economy and penetrates into all corners of people's lives. For example, in the machinery manufacturing industry, the static and dynamic performance of the product is tested, the processing process is controlled and monitored, and the fault diagnosis in the operation of the equipment is diagnosed. In the electric power, chemical, petroleum industries, ...
|
|
City water company, the contradiction of "supply and demand", how to solve the Fujifilm portable flowmeter application
The measurement of urban pipe network flow is an important task of water supply enterprises in pipe network management. In the past few years, our company has used Japan Fuji portable ultrasonic flowmeter to measure water consumption for large water users, and persuaded and alleviated the "supply and demand" contradiction between these enterprises and companies with scientific data; Especially...
|
|
The industry and demand are integrated to accelerate the expansion of new areas
With the proposal of "Made in China 2025" and the increasing role of science and technology in promoting new industries, the automation industry has begun to pick up, and the inverter market has regained its vitality and vitality after the downturn in the first two years. As a world-renowned provider of electrical automation products and systems, Fujifilm ...
|
|
Launched the X-Series IGBT-IPM, which contributes to energy saving in production equipment with low-loss performance
Fuji Electric Corporation (Representative Director: Tsuhiro Kitazawa; Headquarters: Shinagawa-ku, Tokyo) is pleased to announce the launch of the X-Series IGBT-IPM*1, a power semiconductor product equipped with the latest seventh-generation X-Series chips that significantly reduce losses.
1. Background
...
|
|
Fuji Electric has launched a high-speed control system for factories to increase production capacity
Fuji Electric Corporation (headquartered in Tokyo, Japan; President: Michihiro Kitazawa announced the launch of a high-speed control system for factories using the company's newly developed controller.
1. Summary
Due to the increasing variety of products and production volumes, manufacturing plants need to ...
|
|
Fuji Electric keeps pace with the times and adheres to the concept of sustainable development
Fuji Electric (FE), headquartered in Tokyo, under the leadership of Chief Executive Officer Mitsuhiro Kitazawa, announced that it has developed an updated policy on the completion of its development plan for a sustainable society and its corporate vision for environmental protection by 2050.
Sustainable Development Concept ...
|
|
Current status and outlook of Fuji Electric's power generation plant business
Fuji Electric has set forth its management philosophy of "Contributing to a Rich Society, Challenging the Limits of Creativity, and Developing in Harmony with the Natural Environment," and one of the pillars of its management policy is to contribute to the sustainable development of society through energy and environmental businesses.
This article will focus on the energy sector ...
|
|
How do I initialize parameters?
Set H03 to 1, the parameter can be initialized, and the STOP button + UP button are required for dual key operation.
|
|
Fuji Electric and PetroChina jointly established Kunlun Fuji Instrument Company
On the morning of June 1, the opening ceremony of Wuxi Kunlun Fuji Instrument Co., Ltd. was held. Gong Peixing, chairman of the Wuxi CPPCC, was invited to attend the ceremony, and some responsible comrades of the new district participated in the event.
In his speech, Chairman Gong said that the Wuxi Municipal Government and the New District Management Committee will continue to support...
|
|
Fuji Electric Systems Co., Ltd. will release the EX100 series mini uninterruptible power supply system
Fuji Electric Systems Co., Ltd. will release the Fuji Mini UPS EX100 Series on October 5, 2010. This is a new series of high-efficiency uninterruptible power supply systems (UPS) with capacities ranging from 1kVA to 3kVA.
Fuji Electric ...
|
|
Analysis of common causes and preventive measures of inverter failures - Fuji Electric
1. Analysis of common faults in the main circuit
The main circuit is mainly composed of three-phase or single-phase rectifier bridges, smoothing capacitors, filter capacitors, IPM inverter bridges, current limiting resistors, contactors and other components. Many of these common faults* are caused by electrolytic capacitors. The life of an electrolytic capacitor is mainly determined by the ...
|
|
We are building a carbon-free society – Fuji Electric
As carbon-free becomes a global trend, the market for renewable energy that does not emit greenhouse gases will expand.
Against this backdrop, Fuji Electric is accelerating the reform of its business portfolio and accelerating its pace in the fields of renewable energy and distributed power sources to contribute to society.
renewable energy
Obtain...
|
|
How to choose between ultrasonic flowmeter and electromagnetic flowmeter?
As the two most important forms of flow meter in the current flow measurement field, how to choose? Xiaobian elaborates on the characteristics of the following two from the following aspects, hoping to provide some suggestions on selection.
1. Ultrasonic flowmeter
Measuring principle of ultrasonic flow meter:
...
|
|
Current status and outlook of Fuji Electric power semiconductors
Based on the management policy of "contributing to the realization of a sustainable society in the energy and environment business," Fuji Electric is working to address social and environmental issues including global warming by promoting the SDGs throughout its corporate activities, including its supply chain.
To achieve this purpose, the improvement of the ...
|
|
What is the influence of carrier frequency on inverters and motors? - Fuji Electric
【Question】What is the influence of carrier frequency on inverter and motor?
【Answer】1. The influence of carrier frequency on the output current of the inverter
(1) The higher the operating frequency, the larger the duty cycle of the voltage wave, and the smaller the higher harmonic component of the current, that is, the higher the carrier frequency, and the flatness of the current waveform.
|
|
There are always answers to common questions about the use of inverters and transmissions, there are always things you don't know
1. Why is the leakage circuit breaker easy to trip when using the inverter?
This is because the output waveform of the inverter contains higher harmonics, and the motor and the cable between the inverter and the motor will generate a leakage current, which is much larger than that when the motor is driven by the power frequency.
...
|
|
The Water Resources Bureau uses Fuji imported portable ultrasonic flowmeter for measurement
At present, the measurement of production water of enterprises is mostly the on-site installation of electromagnetic flowmeters or fixed ultrasonic flowmeters by local water conservancy bureaus as the measurement eyes, and they always keep an eye on the water used by enterprises to protect the use of public resources and eliminate waste.
In stationary electromagnetic flowmeters or stationary ultrasonic flowmeters ...
|
|
Application of inverter energy-saving technology in electrical equipment (Fuji Electric)
With the rapid development of China's industrial production, the application range of electrical equipment is becoming more and more extensive, in order to improve the overall performance of electrical equipment, the use of frequency conversion energy-saving technology has a good effect. Frequency conversion technology can not only improve the operating efficiency of electrical equipment, but also reduce the operating loss of equipment. The following article ...
|
|
Typical Cases | Leakage problem and treatment of lined magnetic flap level gauge in liquid chlorine tank level monitoring
1. Application and development of magnetic flap level gauge in liquid chlorine tank level detection
Liquid chlorine is a high-risk and highly toxic substance, which is highly corrosive, and once it causes leakage, it will cause great harm to the environment and the human body, so it is particularly important to ensure the safe operation of the liquid chlorine tank. And accurate and reliable control ...
|
|
Contact
working hours
