Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
Features:
Best-in-class speed
By reducing the weight of the arm and using a small electric motor with high output and high rotational speed, the maximum speed and acceleration have been greatly improved. In addition, the acceleration is changed according to the load weight and posture, which always ensures the maximum performance of the robot and significantly reduces the cycle time.
Small wrist and powerful torque
This makes the wrist more compact, allowing for more flexibility in tight spaces. We have encountered small motors with high output and high speed. Strengthen the rigidity of the robotic arm, etc. Wrist load capacity has been improved. Manipulator. The selection of tools and workpiece shapes has been expanded.
Greater range of motion
By expanding the maximum reach and travel of each axis, the area of movement under and near the robot has also been expanded, allowing for more flexible layouts.
High adaptability to the environment
Each section is a double sealed structure, using waterproof connectors, achieving P67 and IP65 protection for the base shaft. (excluding RS003N)
High scalability
Internal valves and sensor harnesses are available as optional equipment, making them easy to use and install a wide range of peripherals. In addition, maintenance holes are included as standard on each part of the arm to facilitate the addition of assembly lines and piping.
Product parameters
Arm type: Multi-articulated robot
Degrees of freedom (axis): 6
Maximum load capacity (kg): 20
Maximum Reach (mm): 1,725
Repeatability (mm) ✽1:±0.04
Range of action (°)
Arm rotation (JT1): ±180
Anterior arm (JT2): +155 - -105
Arm Up and Down (JT3): +150 - -163
Wrist rotation (JT4): ±270
Wrist flex (JT5): ±145
Wrist torsion (JT6): ±360
Maximum speed (°/s)
Arm rotation (JT1): 190
Anterior arm (JT2): 205
Arm up and down (JT3): 210
Wrist rotation (JT4): 400
Wrist flex (JT5): 360
Wrist torsion (JT6): 610
Allowable load torque (N•m)
Wrist rotation (JT4): 45
Wrist flexion (JT5): 45
Wrist torsion (JT6): 29
Permissible load inertia (kg•m2)
Wrist rotation (JT4): 0.9
Wrist flex (JT5): 0.9
Wrist torsion (JT6): 0.3
Weight (kg): 230
Installation: ground, hanging
Installation conditions: ambient temperature (°C): 0 - 45
Relative humidity (%) :35 - 85 (no condensation)
Control cabinet / power supply required (kVA): E01 / 5.6
Degree of protection: Wrist: IP67 equivalent Base: IP65 equivalent
Our customer-centric service concept: the pursuit of a full range of services is a high-quality, high-standard service, the pursuit of every detail of the service process. It is impossible for interests to blossom into brilliant flowers from lies. Only when every process, every action, and every day of service are professional and careful, can we meet or even exceed customer expectations, so that customers can be satisfied and recognized by us. Honest, professional, affordable, and fast, so you can rest assured. "Honest and professional service, affordable price, continuous improvement" is our service philosophy.
This article introduces the Kawasaki/Kawasaki robot RS020N load 20kg arm span 1,725mm product, if you are interested in Kawasaki/Kawasaki robot, please also contact our customer service, we are looking forward to your call, hope our technology and service can bring you a better experience.
|
More on that
|
Kawasaki/Kawasaki's dual-wrist positioning robot duAro1 has 4 axes in each arm
Introduction: duAro1 Kawasaki robot innovation breakthrough - dual-wrist duAro, to achieve true human-machine collaboration. It is possible to perform assembly work such as parts installation and tightening of screws on the work table and conveyor in the same environment as the operator.
...
|
|
Kawasaki/Kawasaki palletizing robot CP700L with an arm span of 3255mm
Introduction: The CP700L robot has the largest load capacity in the same series and the industry's best handling capacity. Carrying heavy loads with a lightweight arm makes it possible to save space and energy. It can meet the needs of a wide range of industries, such as food, medicine, printed matter, and building materials.
...
|
|
Kawasaki/Kawasaki Robot RS010N Load 10 kg Weight 150 kg
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki large-payload robot BX165L 6-axle weighs 890kg
Introduction: The BX165L robot is a high-speed robot with built-in cables that can replace existing robots and can replace existing robots.
Product parameters
Arm Type: ...
|
|
Kawasaki/Kawasaki Robot BX100L has an arm span of 2,597 mm
Introduction: The BX100L robot's optimized body shop robot can be used to replace existing robots, and is a high-speed robot with built-in cables that can handle everything from small and lightweight welding guns to medium-sized welding guns.
Product parameters
Hand...
|
|
Kawasaki/Kawasaki Robot RS050N Load 50kg Reach 2,100mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Clean Robot TTS Series Repeatability ± 0.1 mm
Introduction: The TTS series can be used with one robot to support EFEM from 2 FOUP to 3 FOUP without a walking device. Equipped with a drive part developed in-house by Kawasaki, it is capable of high-precision and high-rigidity operation. At the same time, due to the use of the upper and lower shaft telescopic structure, no matter ...
|
|
Kawasaki/Kawasaki welding robot BX100S payload 100 kg
Introduction: The smallest robot in the BX series, with built-in cables, is more suitable for setting up small and lightweight welding guns and high-density configurations where the robot is installed around the workpiece.
Product parameters
Arm type: Multi-articulated robot
...
|
|
Kawasaki YF003N load 3kg operating range ø1300×H500mm
Introduction: The Y series robots are pick-and-place parallel robots, and their quality and reliability have become synonymous with Kawasaki. Its shaftless design is easy to maintain and program, with outstanding load capacity, reach and speed.
features
High processing power
YF002N achieves 200cpm ...
|
|
Kawasaki/Kawasaki Clean Robot NTS Series Reach 1066mm
Introduction: The NTS series can be used with one robot to support EFEM from 2 FOUP to 3 FOUP without a walking device. Equipped with a drive part developed in-house by Kawasaki, it is capable of high-precision and high-rigidity operation.
Products...
|
|
Kawasaki/Kawasaki 6-axis robot BX165N with a 2325mm reach
Introduction: The BX165N robot has a maximum arm span of 2325mm with a payload of 165 kg, and the optimized body shop robot can be equipped with a large welding gun, with built-in cables, and a medium-long range of action, even in high-density configurations.
Give birth...
|
|
Kawasaki/Kawasaki Robot BX200L Load 200kg Arm Span: 2597mm
Introduction: BX200L robot load 200kg maximum arm span of 2597mm, optimized body shop robot can replace the existing robot, is a built-in cable, and can cope with large welding guns from the high-speed robot.
...
|
|
Kawasaki/Kawasaki Robot MG15HL 6-axis Arm span 4005mm
Introduction: The maximum load capacity robot of the M series integrates a compact form factor design with long reach and high wrist torque. With an impressive load capacity of up to 1,500 kg, the design of this innovative robot series gives them extremely easy and high-precision lifting and maneuvering.
|
|
Kawasaki/Kawasaki Robot RS007L 7KG 930mm
Introduction: The R-Series robots set the benchmark for all small and medium-sized industrial robots. The compact design and outstanding speed, reach and working range make the R-Series robots suitable for a wide range of applications in many different industries.
...
|
|
Kawasaki/Kawasaki Robot ZX165U 165 Kg 2651 mm
Introduction: ZX165U large general robot has a wide range of achievements in various industries and applications; There is no motor on the wrist, which can work in harsher environments; It can cover a wide range of rotation of 360°.
Product Details
...
|
|
Kawasaki/Kawasaki painting robot KJ194 with a payload of 15 kg at the wrist and 25 kg at the arm
Introduction: The KJ194 robot has a large hollow inner diameter wrist of φ70, and can be equipped with a spraying machine on the upper part of the arm. Ground-mounted specifications.
...
|
|
Kawasaki/Kawasaki Control Cabinet D60 Semiconductor Robot Max7-axis
Introduction: D Control Cabinet (Semiconductor Robot) A control cabinet for semiconductor robots that corresponds to one arm of the D60 and two arms of the D61. The compact D60 can control up to 7 axes, and the D61 can control 12 axes. The control cabinet for worldwide use meets both SEMI and CE standards.
...
|
|
Kawasaki/Kawasaki Control Cabinet F60 8.3kg 6-axis control number
Introduction: The concentration of control cabinet parts· the reduction of small · weight and the optimization of parts have reduced the size and weight of the control cabinet by 77% and 72% compared with the previous Kawasaki model, and achieved miniaturization. Therefore, it can be stored on a 19-inch stand and can be stacked.
|
|
Kawasaki/Kawasaki Paint Robot KJ264 weighs 530 kg and has an arm span of 2,640 mm
Introduction: The KJ264 bracket robot has a large hollow inner diameter wrist of φ70, which can be equipped with a spraying machine on the upper part of the arm, and is a lightweight explosion-proof spraying robot with built-in cables and a wide range of motion, which can cope with large workpieces. Bracket type specifications.
...
|
|
Kawasaki/Kawasaki Painting Robot KF192 Payload 12kg Weight 690kg
Description: The K series of coating robots combines powerful programming flexibility with high running performance. The KF192 robot has a BBR-type wrist that is easy to spray on frontal · flat surfaces, and is a space-saving small-area explosion-proof spraying robot.
...
|
|
Contact
working hours
